specifications - FAACO - Federal Aviation Administration Contract ...

PART 2.00PRODUCTSFTWIC-2235June, 20092.01 MATERIALS:A. CARPET TILE (CT-1):Install government furnished carpet per manufacturers instruction as indicated ondrawings.B. UNDERLAYMENT:Self-leveling underlayment similar to “Dex-O-Tex SLU55” or equal.C. CARPET ADHESIVE:Release type vinyl adhesive as specifically recommended by carpet manufacturer'sprinted literature.PART 3.00EXECUTION3.01 PREPARATION:A. Examine substrate and report conditions detrimental to the proper and timely completionof the work to the Contractor, who shall correct such defects. Do not install any materialsuntil defects have been corrected. Grind down high spots. Fill in low areas with latexemulsion floor filler.B. Clear substrate of trash or debris and tools or equipment of other trades. Vacuum floorimmediately prior to installation of carpet. If necessary, mop with soapy water followedby a rinsing with clean water.3.02 INSTALLATION:A. UNDERLAYMENT:1. Prepare the compound at the time of installation using the dry powder and liquidadmixture per manufacturer’s instructions.2. Spread the self-levelling compound an average of 1/8” thicknessB. CARPET TILE:3.03 PROTECTION:All carpet tiles shall be installed strictly in accordance with manufacturer’s instructions.After carpet has been installed, limit traffic on floor. If additional work is to be performed in thespace, install dropcloths, taped around the edges to protect the carpet.09684-2