specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC-2235June, 2009B. Materials shall be stored at a minimum temperature of 70 degrees F for 48 hours prior tobeginning installation. Provide adequate ventilation during installation.PART 2.00PRODUCTS2.01 MATERIALS:A. VINYL COMPOSITE FLOOR TILE (VCT):One-eight (1/8") inch thickness; 12" x 12" inches; conforming to Fed. Spec. SS-T-312B;Type IV; heavy commercial classification; color and pattern as indicated on the drawingsor as selected by the Contracting Officer. Tile shall be first quality material with eachcolor from a single color batch. Armstrong Excelon, Stonetex #52155 Forest Moss orapproved equal.B. RUBBER FLOOR TILE:Raised disk design; manufactured by Flexco, Radial II, color # 02 Bark or approvedequal.C. ADHESIVE:Flooring adhesive conforming to Fed Spec MMM-A-115, and manufactured by the samecompany that furnishes the resilient flooring.D. RUBBER STAIR TREAD AND RISERTreads shall be heavy duty with circular pattern in a solid color; manufactured by Flexco,Radial II #1700 one piece stair tread and riser. Note: cove stick required at each stair.Stair treads must be installed with Flexco 16/86 Multiperformance Tile & TreadAdhesive. Flexco 36 Epoxy Caulking Compound should be applied to the arch of thetread (nose). The adjustable nose portion should be secured with contact adhesiveaccording to Flexco instructionsE. RUBBER BASE, VINYL BASE (RB):Four (4") inch high vinyl cove base, 1/8" inch thickness; as manufactured by Armstrong,Allstate or approved equal, conforming to Fed Spec SS-W-40, Type I or II, Style A andB. Furnish pre-formed inside and outside corner and end stops at all base terminations.Color as indicated on the drawings.F. CLEANER:A neutral chemical type cleaner such as Hillyard Chemical Company "Super Shine All"Cleaner, or approved equal.G. SEALER:Water based metalized acrylic polymer undercoated sealer such as Industrial Division,Purex Corp., Franklin's "Super Gard", or approved equal.09661-2