specifications - FAACO - Federal Aviation Administration Contract ...

09509 ACOUSTICAL CEILINGS AND SUSPENSION SYSTEMSFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor, materials, equipment and incidentals necessary to install a complete acoustical tileceiling and suspension system for each area scheduled.1.02 RELATED WORK COVERED ELSEWHERE:Access Doors Section 08305Painting Section 09901Grills & Diffusers Division 15Light Fixtures Division 161.03 QUALITY ASSURANCE:A. ERECTOR'S QUALIFICATIONS:Refer to Section 01040.B. FIRE RESISTANT REQUIREMENTS:Acoustical materials shall have a class 25 flame spread rating conforming to Fed SpecSS-S-178A.C. TOLERANCES:1.04 SUBMITTALS:Suspension System when loaded with ceiling tile, acoustical insulation, light fixtures andother ceiling mounted incidental shall not deflect more than 1/360 in a four foot spanwhen tested as a simple beam with free ends, measured at the center of the span.Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include:A. Product data sheets.B. Samples of each type of acoustical tile (3 full size tiles of each type).C. Sample box of each type of suspension system.D. Certification of flame spread and UL ratings.1.05 STANDARDS AND REFERENCES:The applicable provisions of the following standards and references shall apply to this section asif written herein in their entirety:A. FEDERAL SPECIFICATIONS (FED SPEC):09509-1