specifications - FAACO - Federal Aviation Administration Contract ...

09260 DRYWALL CONSTRUCTIONFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor, materials, equipment and incidentals necessary to install drywall, includingpartition systems, suspended gypsum ceilings, furring and all taping, bedding, sanding andfinishing of gypsum board surfaces.1.02 RELATED WORK COVERED ELSEWHERE:Miscellaneous Metal Section 05500Caulks and Sealant Section 07921Metal Frames Section 08110Aluminum Frames Section 08410Ceramic Tile Section 09310Painting Section 09901Toilet Accessories and Handrail Section 108051.03 QUALITY ASSURANCE:FIRE RATINGS:Fire rated construction shall use materials which comply with a recognized testing laboratory'stest assembly for the rating specified.1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include productdata sheets and specifications. Provide two (2) sets of 12" x 12" inch samples of texture andfinish which shall be approved by the Contracting Officer before the start of finish work. Submit12" long samples of trim and accessories.1.05 REFERENCES AND STANDARDS:The applicable provisions of the following references and standards are hereby made a part of thisSection as if written herein in their entirety:A. FEDERAL SPECIFICATIONS - (FED SPEC) PUBLICATIONS:FF-S-325QQ-S-700QQ-S-775QQ-W-461SS-L-30Shield, Expansion; Nail, Expansion; and Nail, Drive Screw (Devices,Anchoring, Masonry)Steel, Sheet and Strip, Medium and High CarbonSteel Sheets, Carbon, Zinc-Coated (Galvanized) by the Hot Dip ProcessWire, Steel, Carbon (round, bare and coated)Lath and Board Products, Gypsum09260-1