specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC-2235June, 2009Square face, square edge, wrought push pull plates, stainless steel satin finish andattached to face of door with wood screws.N. DOOR SILENCERS:Fed Spec FF-H-111, Type 1337A, Manufacturer's standard rubber silencers. Providesilencers at all hollow metal door frames.O. AUTOMATIC FLUSH BOLT:Steel component conforming with ANSI requirements for fire rated doors operated inpairs. When operating door opens, the latching bolt of the flush bolts or the opposite leafshall retract automatically. Provide investment cast cam triggers.P. COORDINATOR:Manufacturer's standard door coordinator for doors opening as pair and requiring onedoor to close ahead of the other leaf. Provide adjustable override safety feature.Flushbolts, coordinators, and stops to be by one manufacturer.Q. ELECTRO-MAGNETIC HOLDER: [NOT APPLICABLE]A single point electro-mechanical holder having track assembly consisting of an armroller and solenoid operated hold open mechanism. Device shall have provision forconnecting to smoke detectors and shall be similar to LCN 4040 SED Series. Electromagneticunits and closers to be by one manufacturer.R. FASTENERS:2.02 FINISHES:Size, quantity and finish necessary by the specific conditions. Use machine screws andexpansion anchors at concrete or masonry, flush headed wood screws at wood surfacesand machine screws or other appropriate fasteners at metal.Unless noted otherwise in the hardware sets, all hardware finish shall conform to the following:A. ALUMINUM DOORS:Finish of all hardware used in connection with aluminum doors and entrances shall beanodized duranodic (BHMA 313AN).B. INTERIOR WOOD DOORS:Exposed surfaces shall be clear anodized.Any product that does not come with the appropriate finish as standard may be furnished in afinish that matches that specified as close as possible. Painted finishes shall be a color thatmatches this finish as near as possible.08710-6