specifications - FAACO - Federal Aviation Administration Contract ...

08710 FINISH HARDWAREFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:A. Furnish labor, materials, equipment and incidentals necessary to install hardware.Coordinate this work with the supplier of hollow metal and aluminum doors byfurnishing necessary blue print templates, properly annotated to the approved hardwareschedule.B. Furnish incidental hardware items such as brackets, arms, strikes, inserts and platesnecessary for the proper operation of the hardware specified, along with bolts, screws,anchors or other fastening devices necessary.C. Furnish hardware necessary to comply with applicable State, Federal and local buildingcodes, including requirements of the Americans with Disabilities Act of 1990 (ADA).1.02 RELATED WORK COVERED ELSEWHERE:Metal doors and frames Section 08110Aluminum Doors and Frames Section 08410Electrical Division 161.03 QUALITY ASSURANCE:A. SUGGESTED MANUFACTURERS:Products specified form a basis of minimal acceptable quality. Substitutions will beconsidered for approval providing requested substituted product meets or exceedsspecified item with regards to construction, design, material, gauge, function, operationand warranty. Provide all necessary data sheets and submit in accordance with Section01300 - No Exceptions.B. DESIGN CRITERIA:Finish of all hardware, unless otherwise noted, shall be US32D. Powder coated andpainted components shall match.C. ERECTOR'S QUALIFICATIONS:Refer to Section 01040.D. FIRE RATINGS:Doors scheduled to be "labeled" fire doors shall be provided with hardware conformingto applicable NFPA standards. All exit devices shall be UL listed for life safety.08710-1