specifications - FAACO - Federal Aviation Administration Contract ...

1.05 DELIVERY AND STORAGE:FTWIC-2235June, 2009Doors shall be individually packaged in cardboard cartons during shipment and shall remainpackaged until erected. Store in an upright position inside the building or on a platform raisedabove grade and protected by waterproof coverings.1.06 JOB CONDITIONS:Obtain hardware templates and machine doors and frames to fit the specified hinges and lock set.PART 2.00PRODUCTS2.01 MATERIALS:A. STEEL STOCK:Commercial quality, cold rolled or pickled stretcher level steel having the followingminimum gauges:1. Doors:a) Panels - No. 18 gaugeb) Top and Bottom Channels - No. 16 gauge2. Hollow Metal Frames - No. 16 gauge3. Hardware Reinforcement:a) Hinge Reinforcements - No. 9 gaugeb) Closure Reinforcement - No. 12 gaugec) Surface Applied Hardware - No. 14 gauged) Strike Reinforcement - No. 12 gaugeB. SHOP PAINT:2.02 FABRICATIONS:Factory prime coat of red zinc, chromate iron oxide conforming to Fed. Spec. TT-P57(Type III).A. HOLLOW METAL FRAMES:1. Brake form frames to the sizes noted on the drawings, with all bends havingclean, sharp edges. Miter frame corners and internally weld, fill, and grindsmooth.2. Hinge and strike mortises shall match door preparation, in accordance withhardware templates. Drill and tap to fit hardware. Provide 26 gauge, galvanizedplaster guards over all mortises. Punch door frames and provide three (3) rubbersilencers per jamb for single swing door frames, and two (2) rubber silencers perjamb for double swing door frames.08110-2