specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC-2235June, 2009caulking with a caulking gun having properly sized heads to fit the opening. Performcaulking as specified herein.B. JOINT TOOLING:3.03 SCHEDULES:Tool joints 1/4" inch and larger to compress the compound into the joint and to assuresurface contact. For smaller joints, a slicking agent is not recommended. Where widejoint width occurs, "Toulene" or "Xylene" may be used on the tooling appliance toprovide a slicker surface for tooling. However, the use of these materials shall be kept toan absolute minimum.Install caulks and sealants in accordance with the requirements of the individual section, orotherwise with the schedule:SEALANT SCHEDULES2 S3 S4 S5 S6 S7 C1 C2 P2 F2Perimeter around Door Frames Exterior and* *InteriorPerimeters Around Aluminum Store Fronts * * *Perimeters Around Aluminum Windows * * *Joints around Precast Panels Interior and* *ExteriorExpansion Joints around Precast Panels *Control Joints around Masonry Walls * *Flashings and Metal Copings * * *Metal Wall Panels * * * *Perimeters around Woodwork & Dissimilar* *MaterialsPerimeters of plumbing fixtures * *Countertops splashes and millwork *Joints and Penetrations in Fire Rated Walls *Water Immersion *Traffic Bearing Joints *Chemical Resistant Joints * **Preferred Material. Where more than one item is indicated, either product may be used.END OF SECTION07921-5