Ferrobal Rod ends, Hydraulic rod ends, Spherical plain bearings ...

Sliding combination:
steel / steel
Inner ring:
bearing steel, hardened, ground and
phosphated
Outer ring:
bearing steel, hardened, ground and
phosphated
Lubrication:
lubrication required
Description: DIN ISO Hydraulic rod end with welding
slope and dowel pin at the end of rod. Made of spherical
plain bearing DGE.. ES (ES-2RS) pressed into rod end
housing. Sliding combination steel / steel.
Type DGK…DO-2RS with two additional seals available
on request with grease nipple.
measurement [mm] load rating weight
type h2 l6 l7 l8 D dk α Co
[°] [KN] [kg]
DGK 10 DO* 24 38,5 15,0 1,5 19 16,0 12 15,6 0,041
DGK 12 DO* 27 44,0 18,0 1,5 22 18,0 11 21,6 0,066
DGK 15 DO** 31 51,0 20,0 2,0 26 22,0 8 32,0 0,120
DGK 17 DO** 35 58,0 23,0 2,0 30 25,0 10 40,0 0,190
DGK 20 DO** 38 64,5 27,5 2,0 35 29,0 9 54,0 0,230
DGK 25 DO 45 77,0 33,0 3,0 42 35,5 7 72,0 0,430
DGK 30 DO 51 87,5 37,5 3,0 47 40,7 6 95,0 0,640
DGK 35 DO 61 102,0 43,0 3,0 55 47,0 6 125,0 0,960
DGK 40 DO 69 115,0 48,0 4,0 62 53,0 7 156,0 1,300
DGK 45 DO 77 128,0 52,0 4,0 68 60,0 7 208,0 1,800
DGK 50 DO 88 144,0 59,0 4,0 75 66,0 6 250,0 2,500
DGK 60 DO 100 167,5 72,5 4,0 90 80,0 6 390,0 3,900
DGK 70 DO 115 195,0 86,0 5,0 105 92,0 6 510,0 6,600
DGK 80 DO 141 231,0 98,0 5,0 120 105,0 6 620,0 8,700
Subject to change without notice. * without grease nipple
** with grease nipple
DGK...DO
hydraulic rod ends,
according to
DIN ISO 12240-4,
series E
order number measurement [mm]
type d d1 d2 d7 d6 B C1
DGK 10 DO* 10 13,2 29 3 15,0 9 7
DGK 12 DO* 12 14,9 34 3 17,5 10 8
DGK 15 DO** 15 18,4 40 4 21,0 12 10
DGK 17 DO** 17 20,7 46 4 24,0 14 11
DGK 20 DO** 20 24,1 53 4 27,5 16 13
DGK 25 DO 25 29,3 64 4 33,5 20 17
DGK 30 DO 30 34,2 73 4 40,0 22 19
DGK 35 DO 35 39,7 82 4 47,0 25 21
DGK 40 DO 40 45,0 92 4 52,0 28 23
DGK 45 DO 45 50,7 102 6 58,0 32 27
DGK 50 DO 50 55,9 112 6 62,0 35 30
DGK 60 DO 60 66,8 135 6 70,0 44 38
DGK 70 DO 70 77,8 160 6 80,0 49 42
DGK 80 DO 80 89,4 180 6 95,0 55 47
33