Olivio Grande LED - Sistema [OLGL-S] selux.us

Olivio Grande LED - Sistema Arm MountLines 2, 3 and 4 and line quantitiesapplicable to SSx mounting onlyProject: Type: Qty:FIXT # qTy SERIES - OpTICS- MOunTInG - LAMpInG - LAMp COLOR- FInISh - VOLTAGE - ACCESS.1 - ACCESS.21 OLGL - R2 - - L71 - - - - -2 OLGL - R2 - - L71 - - - - -3 OLGL - R2 - - L71 - - - - -4 OLGL - R2 - - L71 - - - - -SSx only - FIRST specify pole arm locations on page 4, ThEn assign fixture numbers to pole locations below.pOLE SERIES - hEIGhT - FInISh - RIVnuT pAIRS - OpT. 1 - OpT. 2 -LOC.1 -LOC.2 -LOC.3 -LOC.4 -LOC.5 -LOC.6 -LOC.7 -LOC.8O- - - - - - - -use pulldowns to assign fixture # to arm locations: - - - - - - -SeriesOpticsMounting Light Engine Lamp Color Finish VoltageAccessoriesOLGLOlivioGrandeLEDR2Type IIDistributionSSx 1 Specify ArmLocations(x = numberof arms)W1 Single WallMountW2 Double WallMountL71LED LightEngine835 3500 KCRI 80650 5000 KCRI 65WHBKBZSVSPWhiteBlackBronzeSilverSpecifypremiumColor120277DSDMDark Sky 0° Tilt OptionDimming (0-10V)1 use chart on page 4, codes will be filled in automaticallyOLGL-xx-xxxx-xxx-S1SCALE = 1:20417Selux Corp. © 2013TEL (845) 834-1400FAX (845) 834-1401www.selux.usOLGL-S-0613-01 (ss-v1.3)24 13 /16"(630mm)Union Made Affiliatedwith IBEW Local 36312 1 /2"(318mm)8 1 /16"(205mm)NRTL Listed (i.e. UL, CSA)3612 5 /8"(320mm)10 13 /16"(275mm)28 13 /16"(730mm)IP651. Housing - Two piece high pressuredie cast housing, made of low copperaluminum alloy. Single recessed captivescrew allows easy access to lightengine & driver.2. Gasketing - (not shown) uV andozone-resistant, continuous moldedsilicone gasket between fixture housingand lens base provide Ip65 levelingress protection.3. Lens - Tempered clear glass lensheld by center screw.4. Light Engine - high flux LEDs.Selux is using brand name LED andlens manufacturers. V-shaped diecastaluminum LED engine base,optimized for type II distribution withhigh visual comfort and max uniformity.5. Driver - (not shown) Selux usesbrand name high efficiency LED drivers.Min. operating temperature -40°C/ -40°F.6. Heat Sink Fins - Designed intofixture head for proper thermal managementand long life of LED engine(50,000 hrs).7. Arm - 70 degree conical cast aluminummounting arms with easyaccess for wiring connection andpole mounting. Fixture head jointprovides tilt-swivel range from 0° to175°, and 360° rotation. Locks downwith set screws.8. Rivnuts - (not shown) (2) TwoRivnuts required per Fixture Armand installed by manufacturer.9. Surge Protection - (not shown)Luminaire includes additional surgeprotection device to protect from indirectlightning strikes, standardExterior Luminaire Finish -Selux utilizes a high quality polyesterpowder Coating. All Selux luminairesand poles are finished in our TigerDrylac certified facility and undergo afive stage intensive pretreatmentprocess where product is thoroughlycleaned, phosphated and sealed.Selux powder coated products provideexcellent salt and humidity resistanceas well as ultra violet resistancefor color retention. All products aretested in accordance with test specificationsfor coatings from ASTM andpCI.Standard exterior colors are White(Wh), Black (BK), Bronze (BZ), andSilver (SV). Selux premium color (Sp)are available, please specify fromyour Selux color selection guide.5 Year Limited LED LuminaireWarranty - Selux offers a 5 yearLimited Warranty to the original purchaserthat the Selux Olivio LEDluminaire shall be free from defects inmaterial and workman- ship for up tofive (5) years from date of shipment.This limited war- ranty covers theLED driver and LED array wheninstalled and oper- ated according toSelux instruc- tions. Fixture suitablefor ambient temperature of 25° C(77° F). For details, see “Selux Termsand Condition of Sale.”Listings & Ratings: Tested toIESnA LM-79-08 and LM-80 teststandards at 25°C ambient temperature.Ip65.In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alterthe function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountLumen Output for OLGLR23500KCRI>805000KCRI>652978 lm3216 lmMounting ConfigurationsSingle(Arm Location: OD)EpA = 2.0 ft 2 (0.186 m 2 )Weight = 35 lbs. (15 kg)Rivnuts = 1 pair (Rn1)Double @ 180°(Arm Locations: OG-OS)EpA = 4.0 ft 2 (0.372 m 2 )Weight = 70 lbs. (30 kg)Rivnuts = 2 pair (Rn2)Double @ 90°(Arm Locations: OD-OV)EpA = 4.0 ft 2 (0.372 m 2 )Weight = 70 lbs. (30 kg)Rivnuts = 2 pair (Rn2)* please note orientation of LEDsin double @ 90° configuration.*48"(1219mm)48"(1219mm)48"(1219mm)PoleHeight(22' shown)SCALE: 1/4 in. = 12 in.Selux Corp. © 2013OLGL-S-0613-02 (ss-v1.3)In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountMounting ConfigurationsQuad Pole Arms stepped @ 90° (Arm Locations: 0G-1M-2S-3A)EpA = 8.0ft 2 (0.743 m 2 )Weight = 140 lbs. (63 kg)Rivnuts = 4 pair (Rn4)6 Fixture Pole Arms stepped @ 60°(Arm Locations: 0E-1I-2M-3Q-4U-5A)EpA = 10.8 ft 2 (1.003 m 2 )Weight = 210 lbs. (95 kg)Rivnuts = 6 pair (Rn6)48"(1219mm)48"(1219 mm)18" (457mm)18" (457mm)18" (457mm)18" (457mm)18" (457mm)PoleHeight(28' shown)18" (457mm)18" (457mm)18" (457mm)SCALE: 1/4 in. = 12 in.Selux Corp. © 2013OLGL-S-0613-03 (ss-v1.3)In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountSpecify Mounting Configurations48"(1219mm)HEIGHT CODEuse checkboxes provided in chart below. Columns #0 through #9indicate heights starting with 4 feet (1219mm) below top of pole andproceeding downwards in increments of 18 inches (457mm). RowsA through X indicate angular placement around pole starting with 0°at handhole and proceeding clockwise.DISTAnCE FROM TOp OF pOLECLOCKWISE FROM hAnDhOLE18"(457mm)18"(457mm)18"(457mm)18"(457mm)18"(457mm)18"(457mm)18"(457mm)18"(457mm)18"(457mm)Handhole24"(610mm)1234567890C = 30°B = 15°A = 0°X = 345°Selux Corp. © 2013OLGL-S-0613-04 (ss-v1.3)D = 45°W = 330°E = 60°V = 315°U = 300°F = 75°T = 295°G = 90°S = 270°H = 105°Angular location of mounting arm from handhole at 0° proceeding arount pole clockwise.R = 255°ANGLULAR LOCATION CODE(NOTE: If using AdobeAcrobat to enter data [checks]in chart on right, the followinginstructions will be carried outautomatically.)When specifying non-standardconfigurations, enter"SS+(total number of armsspecified)" on configurationmatrix on page 1 in the fixtureMounting field. Example: SS4(specifying 4 mounting arms)Build up the Mounting ArmLocation Codes from chart onright ("height Code" +"AngularLocation Code") i.e. "3G" = 8feet from top of pole, 90°clockwise from handhole.Enter Mounting Arm LocationCodes on page 1 in theblanks provided that follow thepole Option blanks.Example: 3G-3p-4A-5S(1) pair of Rivnuts requiredper arm.I = 120°Q = 240°J = 135°K = 150°L = 165°M = 180°N = 195°O = 210°P = 225°A 0°B 15°C 30°D 45°E 60°F 75°G 90°H 105°I 120°J 135°K 150°L 165°M 180°N 195°O 210°P 225°Q 240°R 255°S 270°T 285°U 300°V 315°W 330°X 345°NOTE: Arms mounted at same height level must be spacedapart at 90° minimum. Arms mounted at adjacent height levels(18" apart) must be spaced apart at 45° minimum.0 1 2 3 4 5 6 7 8 94' 5.5' 7' 8.5' 10' 11.5' 13' 14.5' 16' 17.5'In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountWall Arm Mounting ConfigurationsSingle Wall Arm (W1)EpA = 1.8 ft 2 (0.167 m 2 )Weight = 45 lbs. (20 kg)Double Wall Arms @ 60° (W2)EpA = 4.0 ft 2 (0.372 m 2 )Weight = 75 lbs. (34 kg)28 9 /16"(725mm)10 13 /16"(275mm)SCALE: 1/4 in. = 12 in.9 7 /16"(240mm)22 1 /4"(565mm)11 13 /16"(300mm)27 3 /4"(705mm)11 13 /16"(300mm)21 1 /16"(535mm)15"(380mm)Wall Mounting Pattern5 1 /8" (130mm)7 7 /8" (200mm)Ø 3 /8"(10mm)Ø 3 /8"(10mm)7 3 /16"(182mm)8 3 /8"(212mm)SINGLESCALE = 1:5DOUBLESelux Corp. © 2013OLGL-S-0613-05 (ss-v1.3)In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountPole InformationRefer to individual pole specification sheets for construction details, anchorage information and additional options.Tapered Aluminum PoleOptional Base CoversDie cast aluminum, two piece field installable base coversBC3 (AT53)BC9 (ST5928 / ST5936)Ø5"(127mm)Ø6"(152mm)5 3 /16" (131mm)8 1 /8" (205mm)Ø12 1 /2"(316mm)20 3 /8"(518mm)OverallHeightBC10 (AT74 / ST733)Ø7"(177mm)8 1 /8" (205mm)24"(610mm)0-AT845 supplied with nut coversPOLES20 3 /8"(518mm)O-AT53O-AT74O-AT845*O-ST5928O-ST5936O-ST733O-ST838BC3XBASE COVERSBC9XXBC10XX*0-AT845 supplied with nut coversPole SeriesBoltCircleWallEPA Information (ft 2 )80 mph 90 mph 100 mph 110 mphHeightFinishRivnutPairsOptionsO-AT53-156 5"-3" Tapered Alum poleO-AT53-188 5"-3" Tapered Alum poleO-ST5936-11 5.9"-3.6" Tapered Steel poleO-AT74-156 7"-4" Tapered Alum poleO-AT845-188 8"-4.5" Tapered Alum poleO-ST5928-11 5.9"-2.8" Tapered Steel poleO-ST733-11 7"-3.3" Tapered Steel poleO-AT845-250 8"-4.5" Tapered Alum poleO-ST838-11 8"-3.8" Tapered Steel poleO-ST838-7 8"-3.8" Tapered Steel pole8.5”8.5”9”10.5”11.5”9”10”11.5”11”11”0.1560.18811 ga0.1560.18811 ga11 ga0.25011 ga7 ga16.119.519.320.022.412.520.322.418.933.512.415.115.115.417.39.916.217.314.927.09.711.912.212.213.88.013.113.812.022.07.89.610.09.911.26.011.011.28.018.012 12 ft.16 16 ft.18 18 ft.22 22 ft.26 26 ft.28 28 ft.30 30 ft.WH WhiteBK BlackBZ BronzeSV SilverSP SpecifypremiumColorRN1 1 pairRN2 2 pairsRN3 3 pairsRN4 4 pairsRN5 5 pairsRN6 6 pairsRN7 7 pairsRN8 8 pairsBC3 Die Cast Two-pieceBase Cover(AT53poles only)BC9 Die Cast Base Cover(for ST5928 andST5936 poles only)BC10 Die Cast Base Cover(for AT74 and ST733poles only)REC GFCI Receptacle withweather-proof cover** Weatherproof cover intended for portable toolsor other portable equipment connected to theoutlet only when attended. For other requirementsplease consult factory.Other pole configurations available, consult factory EpA Calculations allow for 1.3 Gust Factor See Mounting page for fixture w/arm EpA values(1) pair of Rivnuts is required for every mounting arm in pole mount applications. Rivnut codes are denoted in pairs (1 pair Rivnuts = Rn1,2 pair Rivnuts = Rn2, 3 pair Rivnuts = Rn3, etc) and must be specified for all pole mount configurations.Selux Corp. © 2013OLGL-S-0613-06 (ss-v1.3)In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountAluminum Pole Bolt Circle DetailsMounting Plate DetailConduit OpeningBolt Circle(Max.)Bolt Circle(Min.)Max. Bolt DistanceMin. Bolt Distance90°45°Mounting PlateHandhole Side of PoleSCALE: 1 in. = 3.2 in.Pole SeriesMountingPlateMax. BoltDistanceMin. BoltDistanceBolt Circle(Max.)Bolt Circle(Min.)ConduitOpeningO-AT53 5"-3" Tapered Alum poleO-AT74 7"-4" Tapered Alum poleO-AT845 8"-4.5" Tapered Alum pole9.6” (245mm)11.3” (286mm)12.1” (306mm)6.7” (170mm)7.8” (198mm)8.5” (215mm)5.5” (140mm)7.2” (182mm)8” (202mm)9.5” (241mm)11” (279mm)12” (305mm)7.8” (198mm)10.1” (257mm)11.3” (286mm)4.7” (118mm)6” (152mm)7.5” (191mm)Anchor Bolt DetailAnchorBoltHeightAnchor BoltHeavy Hex NutSplit-LockWasher(Galvanized)use caution when setting anchor bolts.Bolts must be vertically straight andcentered on dimension shown.Concrete footing and feed conduit tobe designed and installed by others.Individual 1:1 scale drawings for installationavailable, please consult factory.Flat Washer(Galvanized)DistanceGrout(by others)Heavy Hex LevelingNut (Galvanized)Concrete(by others)SCALE: 1 in. = 3.2 in.Pole SeriesAnchorBoltHeightDistanceHeavy HexLevelingNutAnchorBoltHeavyHex NutSplit-LockWasherFlatWasherO-AT53 5"-3" Tapered Alum poleO-AT74 7"-4" Tapered Alum poleO-AT845 8"-4.5" Tapered Alum pole3.1” (82mm)4.1” (164mm)4.1” (164mm)0.5” (13mm)0.5” (13mm)0.5” (13mm)3/4”-101”-81”-83/4”-10 x 17”1”-8 x 36”1”-8 x 36”3/4”-101”-81”-83/4” ID1” ID1” ID3/4”-101” ID1” IDSelux Corp. © 2013OLGL-S-0613-07 (ss-v1.3)In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.

Olivio Grande LED - Sistema Arm MountSteel Pole Bolt Circle DetailsMounting Plate DetailConduit OpeningAnchor Bolt HoleBolt DistanceMounting PlateBoltCircleSCALE: 1 in. = 3.2 in.Handhole Side of PolePole SeriesMountingPlateMax. BoltDistanceAnchorBolt HoleBolt CircleConduitOpeningO-ST5936-11 or O-ST5928-1110” (254mm)6.4” (162mm)1.1” (27mm)9” (229mm)6” (152mm)O-ST733-11 7"-3.3" Tapered Steel poleO-ST838-11 8"-3.8" Tapered Steel poleO-ST838-7 8"-3.8" Tapered Steel pole10.9” (276mm)11.5” (292mm)11.5” (292mm)7.1” (180mm)7.8” (198mm)7.8” (198mm)1.1” (27mm)1.1” (27mm)1.3” (33mm)10” (254mm)11” (279mm)11” (279mm)6.8” (172mm)7.8” (197mm)7.8” (197mm)Anchor Bolt DetailAnchorBoltHeightAnchor BoltHeavy Hex NutSplit-LockWasher(Galvanized)use caution when setting anchor bolts.Bolts must be vertically straight andcentered on dimension shown.Concrete footing and feed conduit tobe designed and installed by others.Individual 1:1 scale drawings for installationavailable, please consult factory.Flat Washer(Galvanized)Grout(by others)Heavy Hex Leveling Nut (Galvanized)Concrete(by others)SCALE: 1 in. = 3.2 in.Pole SeriesAnchorBoltHeightHeavy HexLevelingNutAnchorBoltHeavyHex NutSplit-LockWasherFlatWasherO-ST5936-11 or O-ST5928-114.1” (104mm)1”-81”-8 x 36”1”-81” ID1” IDO-ST733-11 7"-3.3" Tapered Steel pole4.1” (105mm)1”-81”-8 x 36”1”-81” ID1” IDO-ST838-11 8"-3.8" Tapered Steel pole4.1” (105mm)1”-81”-8 x 36”1”-81” ID1” IDO-ST838-7 8"-3.8" Tapered Steel pole5” (127mm)1 1/4”-71 1/4”-7 x 42”1 1/4”-71 1/4” ID1 1/4” IDSelux Corp. © 2013OLGL-S-0613-08 (ss-v1.3)In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter thefunction of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.