Lee Progressive Presses and Accessories - Midsouth Shooters Supply
Lee Progressive Presses and Accessories - Midsouth Shooters Supply
Lee Progressive Presses and Accessories - Midsouth Shooters Supply
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Reference ChartIMPORTANT: Dies listed under Groups A, B, C, D, E <strong>and</strong> F are St<strong>and</strong>ard Dies. If the caliber of dies you require is not listed, please call for availability. RCBS® Shell Holder numbersdo not correspond to those of other manufacturers. When two Shell Holder numbers are listed, the most popular is shown first. It may be necessary to use the alternate,depending on the manufacturer <strong>and</strong>/or lot of cases being used. The numbers in ( ) in the table indicates the following: (1) Order Shell Holder by caliber. (2) Cases may be Berdanprimed. Depriming <strong>and</strong> priming must be done by h<strong>and</strong>. If cases were formed from cases having boxer-type primer, use the appropriate Shell Holder for the caliber. (4) Not available.(5) Auto 4x4 Shell Plate not available. (6) Auto 4x4 <strong>and</strong> Five-Station Shell Plates not available. (7) Use #14 for Lapua brass, #37 for Norma brass. The letter codes in thePlastic Ammo Box Size column indicate the following: SR = Small Rifle, MR = Medium Rifle, LR = Large Rifle, MP = Medium Pistol, LP = Large Pistol. * Used only with RotaryCase Trimmer <strong>and</strong> Rotary Case Trimmer-2.90
Change language