Download - Frank's Hospital Workshop

GUIDO RAYOS X, S.A.6I. DESCRIPTIONThe NESTOMAT Radiant Warmer provide a controlled source of radiant heat andillumination. The heat is generated by one 500 watt quartz heat tube located above theprocedure table. The diverging energy emitted from the heating element is reflectedback toward the table surface with a parabolic reflector, this one focuses the divergingwaves of energy into parallel waves which are aimed toward the patient.A lamphouse contains one standard 20 watt halogen lamp for illumination of the workarea.I.1 PATIENT BED. POSITIONING OF PATIENT.The infant should be placed on the procedure table directly on the mattress or with asingle cloth covering between the infant and the mattress cover. The NESTOMATRadiant Warmer has capability (ten locked positions) to place the head up or the headdown. Grasp the locking puller and pull outwards. Reposition the table and releaseknob. The table will lock in position. Tilting puller is located under the front side of thetable.The table has hinged, transparent panels on the sides and front wich can be positionedupright to retain the infant or downward to ease accessibility to the infant. The airtemperature sensor is located at the rear panel.A space for a X-ray cassette tray is provided at the patient platform; the radiant heatershroud can be swivelled, during operation, to allow X-ray tratments, just only pushingthe knob located in the rear side of the shroud.I.2 I.V. STAND.The I.V. stand is mounted in the accessories rear rail, its height is adjustable.I.3 OPERATION CONTROLS.All operation controls are located on the front and the rear of the upper column.MAN-012Sept.00Ed. 1 / Rev. 3NESTOMAT 6050