Download - Frank's Hospital Workshop

GUIDO RAYOS X, S.A.36V. INSTALLATIONTo carry out the installation of NESTOMAT Radiant Warmer, following steps must beexecuted:1. Remove the rear lid of the column ! unscrewing the screws ".2. Unscrew the screws #.3. Introduce the radiant heater device with the cables $ through the bushing %.4. Place the radiant heater device, taking care that the blind holes & are in front ofthe holes where the screws # are positioned.5. Replace the screws # and tighten them firmly.6. Connect the cable $ as per electric diagram in page 35.7. Replace the rear lid ! and replace the screws ".MAN-012Sept.00Ed. 1 / Rev. 3NESTOMAT 6050