Download - Frank's Hospital Workshop

GUIDO RAYOS X, S.A.27suitable. If in doubt check with chemical supplier.For chemical liquid immersion: Some chemicals can be harmful to plastics. If in doubtcheck with chemical supplier.There are no user serviceable parts inside this device.Maintenance.Only qualified personnel should carry out service and maintenance procedures.After any maintenance is completed, ensure the equipment is functioning corectly inaccordance with the published performance specifications.Disassembly• Remove the front panel, fixed by four screws.• remove gas inlet and outlet connectors using torque driver and special adaptor.• Unscrew two manifold retaining screws at bottom of unit.• Disconnet monometer tube at top ot T-connector by pushing down on collar ofT-connector and pulling tube free.• Remove manifold assembly.Replacing valve assembly• Disassemble Neopuff as aoutlined above.• Remove the inspiratory valve assembly using the C-spanner. Valve unscrewsanti-clockwise.• Fit new inspiratory valve assembly, tighten clockwise with C-spanner. Theinspiratory valve assembly can be identified by the shite restrictor plug locatedat the bottom end of the valve.• remove maximum pressure relief valve assembly using C-spanner. Unscrewsanti-clockwise.• Fit new maximum pressure relief valve assembly, tighten clockwise with C-spanner. The masimum pressure relief valve has not restrictor plug.• Reassemble Neopuff and calibrate.The manometer is not a serviceable item and must be replaced by Manometer kitcomplete.MAN-012Sept.00Ed. 1 / Rev. 3NESTOMAT 6050