Download - Frank's Hospital Workshop

More documents

Recommendations

Info

GUIDO RAYOS X, S.A.12II.3. TO HEATIf Preheating Mode was not selected, proceed as follows:Press any key, the LCD will display,AIR=__._ ºCSELECT MODETo select the Operation Mode press AIR or SERVO key. AIR keycorresponds to Air Control Mode; SERVO key corresponds to ServoControl Mode (patient skin temperature).A) AIR CONTROL MODE:NOTE: THE DIGITAL DISPLAY INFORMS THE TEMPERATURE OF THE AIRWHERE THE NEWBORN IS PLACED.Pressing AIR key, the LCD will display ,AIR=__._ ºCPSET AIR=__._By means the numerical keypad, set the heating device working rangebetween 20 and 40 ºC.NOTE: WHEN SETTING TEMPERATURE ENTER ALWAYS 3 DIGITS, EVEN INCASE OF NO DECIMALS. AS EXAMPLE PRESS 3, THEN 7, THEN 0 TO SET 37DEGRESS.Then press ENTER to confirm, the LCD will display ,AT=__._ (__._)PRESS STARTThen press START to start the heating. The heat lamp will indicate theoperation of the heating device. By reaching the selected heating range,the heating devices will modulate to keep the temperature stable.The LCD will display the air registered temperature, as well as willinform, too, the set temperature, displaying ACTIVED UNIT to informthe heating device is in operation.MAN-012Sept.00Ed. 1 / Rev. 3NESTOMAT 6050
GUIDO RAYOS X, S.A.13AT=__._ ºC (__._)UNIT ACTIVEThe selected heating range can be modified at any time by pressingSTART/STOP and after ENTER key; you will find displayed followingmessage :AIR=__._ ºCSELECT MODEThen set the new temperature by the keypad as previously explained andconfirm by pressing ENTER key. The LCD will display the messagesdescribed above. Then press START key.B) SERVO CONTROL MODE:ATTENTION: BEFORE SELECTING SERVO CONTROL MODEPROCEED TO PREHEAT THE RADIANT WARMER ASEXPLAINED PREVIOUSLY IN THE II.2. TO PREHEATCHAPTER.Before anything display on the screen following message :AIR=__._ ºCSELECT MODEPress SERVO key, the LCD will display ,SKIN=__._ ºCPSET SKIN=__._Set the patient temperature between 20 and 40 ºC by means of thekeypad, confirm by pressing ENTER key.NOTE: WHEN SETTING TEMPERATURE ENTER ALWAYS 3 DIGITS, EVEN INCASE OF NO DECIMALS. AS EXAMPLE PRESS 3, THEN 7, THEN 0 TO SET 37DEGRESS.The LCD will display ,ST=__._ ºC (__._)PRESS STARTMAN-012Sept.00Ed. 1 / Rev. 3NESTOMAT 6050
Page 1 and 2: GUIDO RAYOS X, S.A.1INDEXDisclaimer
Page 3 and 4: GUIDO RAYOS X, S.A.3DISCLAIMERThe s
Page 5 and 6: GUIDO RAYOS X, S.A.5SPECIFICATIONSD
Page 7 and 8: GUIDO RAYOS X, S.A.7(1) HEAT/CALOR
Page 9 and 10: GUIDO RAYOS X, S.A.91 I/O Start up
Page 11: GUIDO RAYOS X, S.A.11• Press any
Page 15 and 16: GUIDO RAYOS X, S.A.15II.5 OXYGEN MO
Page 17 and 18: GUIDO RAYOS X, S.A.171. SENSOR ALAR
Page 19 and 20: GUIDO RAYOS X, S.A.19C) POWER FAILU
Page 21 and 22: GUIDO RAYOS X, S.A.211 DISPL 16 CAR
Page 23 and 24: GUIDO RAYOS X, S.A.23IV. OPTIONAL A
Page 25 and 26: GUIDO RAYOS X, S.A.25supply tube.Ch
Page 27 and 28: GUIDO RAYOS X, S.A.27suitable. If i
Page 29 and 30: GUIDO RAYOS X, S.A.29ITEM REF. DESC
Page 31 and 32: GUIDO RAYOS X, S.A.312 2134105 6 7
Page 33 and 34: GUIDO RAYOS X, S.A.33Press Alarm Se
Page 35 and 36: GUIDO RAYOS X, S.A.35Alarms are sti
Page 37 and 38: GUIDO RAYOS X, S.A.37MAN-012Sept.00
Page 39 and 40: GUIDO RAYOS X, S.A.39VI. SERVICE.Se
Page 41 and 42: GUIDO RAYOS X, S.A.41• Set Simula
Page 43 and 44: GUIDO RAYOS X, S.A.43NUMBER REF. DE
Page 45 and 46: GUIDO RAYOS X, S.A.45WARRANTYGUIDO
Page 47: GUIDO RAYOS X, S.A.47MAN-012Sept.00

Download - Frank's Hospital Workshop

Create successful ePaper yourself

Delete template?

Save as template?