CipherLab 5100 Time Attendance Terminal Programmer's Manual

Syntech Information Co., Ltd. 智5100 Time Attendance Programmers ManualExampleRemarkData format is as following:KssyyyyMMddhhmmabcdddddddddddddddOrKssyyMMddhhmmabcddddddddddddddK: No meaningss: 2 digits for station IDyy/yyyy: 2 digits or 4 digitd for yearMM: 2 digits for monthdd: 2 digits for dayhh: 2 digits for hourmm: 2 digits for minutea: 1/0 1 means in validation table 0 otherwiseb: 1~6 indicates function key pressed F1~F6c: 0~9 indicates the prefix code if enabledddddddddddddd:card IDREADThe first entry of data “k200403161407A0929CF993” is displayed on the screen.Please go to front panel set up 12 to see setting for yy or yyyy.3.3.2.2 Remove First Entry – REMOVECommandFormatReturnDescriptionExampleRemarkREMOVEREMOVENEW: The first entry of transaction record is removed successfully.NAK: Invalid commandRemove the first entry of transaction recordREMOVEWhen finished with reading one entry , user must clear it by using this command, so that thefollowing entry can be read then.3.3.2.3 Sum Data – DATACommandFormatReturnDescriptionExampleRemarkDATADATAThe total number of transaction entries.NAK: Invalid commandSum up transaction entriesDATA3.3.2.4 Delete All Entry – CLEARCommandFormatReturnDescriptionExampleRemarkCLEARCLEARDONE: Success to delete all recordsNAK: Invalid commandDelete All EntryCLEAR3.3.3 Valid Cards (valid data list)A list of card ID with employee’s name could be downloaded to 5100 T&A terminal, and this table can beactivated/de-activated to change the operation style.2009.05.18 8