CipherLab 5100 Time Attendance Terminal Programmer's Manual

Syntech Information Co., Ltd. 智5100 Time Attendance Programmers Manual20. Set data formatSubtitleSet data formatSub-menuDescriptionDefault ValueRemarkTwo options: “Hex” (hexadecimal system) and “Decimal” (decimal system)If “Hex” is selected, then IDs decoded from EM module will be inhexadecimal format.If “Decimal” is selected, then IDs decoded from EM module will be convertedto decimal format.Notes that the way to convert EM data from hexadecimal to decimal is to getthe last eight digits of the hexadecimal card ID and to convert it to decimalform. If the converted data is shorter than ten characters, it will be append with0 from the left side to make up 10 digitHex21. Set languageSubtitleSub-menuDescriptionDefault ValueRemarkSet languageTwo options: “English” and “Local” (other languages)If “English” is selected, the language displayed on the screen will be changed toEnglish immediately.If “Local” is selected, the language displayed on the screen will be changed to auser-defined local language immediately.EnglishThe “Local” option is currently defined as simplified Chinese by default, but itcan be changed to any other language.22. Set show dataSubtitleSub-menuDescriptionDefault ValueRemarkSet show dataTwo options: “card ID” and “name”When “card ID” is selected, the screen will display ID number when the card isaccepted.When “name” is selected, the screen will display personnel name when the cardis accepted.Card IDThis setting is only valid when valid data list (see 14) is set to enabled.2009.05.18 27