CipherLab 5100 Time Attendance Terminal Programmer's Manual

Syntech Information Co., Ltd. 智5100 Time Attendance Programmers Manual10. Set alarm tableSubtitleSub-menuDescriptionDefault ValueRemarkSet alarm tableA total of 16 alarm time settings are allowed; select an alarm, i.e. Alarm 2, andproceed with time settings.Input 6 digits for hour/minute/second. The first four digits (hh/mm) indicatewhen the alarm is activated, and the last two digits (ss) is the duration inseconds for the alarm to keep on.When the activation time comes, the system will send signal via D-OUT toactivate the alarm.11. Set work shift tableSubtitle Set work shift tableSub-menu A total of 16 time zones for setting auto work shift are allowed; select a workshift, i.e. Work shift 5, and proceed with settings.Description Input 9 digits (4+4+1): the first 4 digits are from-time in hhmm,the second 4digits are end-time in hhmm, and the last digit is the shift ID.When the from-time comes for a work shift, its corresponding LED will turnon.Default ValueRemark12. Set max station IDSubtitle Set max station IDSub-menuDescriptionSet the maximum value allowed for the station IDInput a number of 2 digits at mostDefault Value 99Remark2009.05.18 24