CipherLab 5100 Time Attendance Terminal Programmer's Manual

Syntech Information Co., Ltd. 智5100 Time Attendance Programmers Manualssn for S06n for S11n for S21n for S22n for S23n for S26n for S33n for S2, S7 & S13nn for S01nn for S05nn for S08nn for S09nn for S18nn for S19nn for S30 & S31nn for S32Example S02011: Set to enable keyboard input of station 01.Remark3.3.6 Read System Parameters– station ID– 0: yy, 1: yyyy– 0: Card ID, 1: Name– 0: English, 1: local– 0: EM, 1: myfare, 2: felica– 0: decimal 1: hex– 0: unlock, 1: lock– 0: all, 1: include only, 2: exclude– 0: disable 1: enable– new line connection (11: Master 10:Slave 01:Single)– range 01~99, of 2 digits at most– Blacklist DOUT time, of 2 digits at most– Card display time, of 2 digits at most– Master Card ID, of 20 digits at most– Master Password, of 6 digits at most– IP address, xxx.xxx.xxx.xxx– Port, of 5 digits at mostCommand GFormat G01ss– read line connection (11: Master 10:Slave 01:Single)G02ss– read if keypad input enabled or disabledG05ss– read maximum station numberG06ss– read year formatG07ss– read if store blacklist data enabled or disabledG08ss– read blacklist DOUT timeG09ss– read card display timeG10ss– read backup sumG11ss– read if show Card ID or nameG13ss– read prefix code enabled or disabledG18ss– read Master Card IDG19ss– read Master passwordG21ss– read languageG22ss– read reader typeG23ss– read data formatG26ss– read if lock machine or notG30ss– read 5100 IP addressG31ss– read gateway IP addressG32ss– read portG33ss– read list typeReturn The requested system parameters are displayed on the screen.NAK: Invalid commandDescription Read system parametersss: station ID 01-99Example G0201: return message is 1The keypad input for station 01 is enabled.Remark2009.05.18 12