Bipap Pro 2 User Manual - NBN Group
Bipap Pro 2 User Manual - NBN Group
Bipap Pro 2 User Manual - NBN Group
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
19B. If you are using a mask with a separate exhalation device, connect theopen end of the circuit tubing to the exhalation device as shown inFigure 5–5. Position the exhalation device so that the vented air isblowing away from your face.ExhalationDeviceCircuitTubingFigure 5–5 Connecting an Exhalation DeviceConnect the mask’s connector to the exhalation device, as shown inFigure 5–6. See the mask instructions for complete setup information.Mask or OtherInterfaceMask ConnectorExhalation DeviceFigure 5–6 Connecting the MaskWARNING:The exhalation device is designed to exhaust CO 2from the patientcircuit. Do not block or seal the ports on the exhalation device.3. Attach the headgear to the mask. See the instructions that came with yourheadgear.<strong>User</strong> <strong>Manual</strong>