Bipap Pro 2 User Manual - NBN Group

More documents

Recommendations

Info

13NOTE:Additionally, if an alert occurs, pressing any of the buttons on thecontrol panel will clear the alert.4.2 DISPLAY SCREENThe display allows you to view the measured pressure and displays alert messages.Figure 4–2 shows the device display screen.Figure 4–2 Display ScreenThe information shown on the display screen is defined as follows:ALERTCARDcm H 2OEPAPERASEIndicates that the device requires user attention asindicated on the screen.Indicates that a SmartCard is inserted and detected(BiPAP Pro 2 only).Indicates that the alphanumeric digits are displayinga pressure value.Indicates that an EPAP pressure setting is beingdisplayed.Indicates that the user may clear the Therapy SessionCounter.FLEXIndicates that a Bi-Flex comfort setting is beingdisplayed or is active (BiPAP Pro 2 only).FOSQ Indicates that the FOSQ test is active (BiPAP Pro 2only).HEATIndicates that the humidifier is turned on and/or itssetting is displayed.User Manual
14HOURSIPAPLIGHTNIGHTSPATIENTRAMPRAMP STARTRISE TIMEIndicates that the Therapy Hour Meter is beingdisplayed.Indicates that an IPAP pressure setting is beingdisplayed.Indicates that the control panel LED backlightsetting is being displayed or is active.Indicates that the session counter is being displayed.Indicates that a Patient Disconnect alert is active.Indicates that the ramp function is in progress.Indicates that the ramp starting pressure is beingdisplayed.Indicates that a rise time setting is being displayed.4.3 BREATHING CIRCUIT CONNECTIONFigure 4–3 shows where the circuit tubing connects to the device.Patient InterfaceExhalation PortCircuitTubingBacteriaFilter(Optional)BreathingCircuitConnectionFigure 4–3 Typical Breathing Circuit ConnectionUser Manual
Page 1 and 2: pro 2- AND -User Manual
Page 4 and 5: CHAPTER 7: DEVICE ALERTS ..........
Page 6 and 7: 5CHAPTER 2: WARNINGS AND CAUTIONSWA
Page 8 and 9: 72.2 CAUTIONS• The device may onl
Page 10 and 11: 9OSARampRise TimeObstructive Sleep
Page 12 and 13: 113.3 SYMBOLSThe symbols shown belo
Page 16 and 17: 154.4 REAR PANELFigure 4-4 shows th
Page 18 and 19: 173. Attach the filter cap as shown
Page 20 and 21: 19B. If you are using a mask with a
Page 22 and 23: 215.5.1 USING AC POWERComplete the
Page 24 and 25: 23CHAPTER 6: OPERATING THE DEVICETh
Page 26 and 27: 253. Put on your mask assembly when
Page 28 and 29: 27Figure 6-7 shows how to navigate
Page 30 and 31: 29NOTE:These screens only display i
Page 32 and 33: 312. To increase or decrease the Fl
Page 34 and 35: 332. You can turn the patient disco
Page 36 and 37: 352. Medium Priority SoundThe mediu
Page 38 and 39: 37CHAPTER 8: TROUBLESHOOTINGThis ch
Page 40 and 41: 39Problem Why It Happened What To D
Page 42 and 43: 41CHAPTER 9: CLEANING AND MAINTENAN
Page 44 and 45: 43CHAPTER 10: ACCESSORIESThere are
Page 46 and 47: 45Fuses:There are no user-replaceab
Page 48 and 49: 47GUIDANCE AND MANUFACTURER’S DEC
Page 50 and 51: 49GUIDANCE AND MANUFACTURER’S DEC
Page 52 and 53: 51LIMITED WARRANTYRespironics, Inc.
Page 54: 1018989JH 1/22/04

Bipap Pro 2 User Manual - NBN Group

Create successful ePaper yourself

Delete template?

Save as template?