BrightStor CA-1 Tape Management - SupportConnect

BrightStor CA-1 Product Documentation ChangePDC# QI47060DATE: November 18, 2003RELEASE: 5.2ENVIRONMENT: MVSHYPER: NoSUBJECT: Changes to the 3495/3494 Tape Library Data Server Synchronization Utility CTSSYNCDESCRIPTION/DISCUSSION:CTS APAR QO46925 was created to standardize return code setting of utility CTSSYNC. The programlogic was changed to set appropriate completion codes in case of missing input parameters or LCScommandfailures due to volumes not being found in the LCS database.The following documentation changes are provided to clarify return code setting.RESOLUTION:BrightStor CA-1 Utilities and Reports Reference Guide1.4 CTSSYNC - 3495/3494 Tape Library Data Server Synchronization UtilityCompletion CodesCTSSYNC can complete with the following condition codes.RC=0 Successful completionThe requested commands were performed successfully.Or commands were not processed because no volser was provided.RC=4 Successful completion with redundant commandsIn VERIFY mode, one or more ATL commands failed or could not be performed because the volser wasnot defined in the 3495/3494 LCS database.Or for the SYNC command, synchronization of one or more volumes was bypassed, due to their status inthe tape management database.Or a PRIVATE, PROTECT or SCRATCH command was issued for a volume which already was in therequested status in the LCS database.RC=8 Processing errorsOne or more ATL commands failed or could not be performed because the volser was not defined in the3495/3494 LCS database, and NOVERIFY was specified.Or one or more ATL commands failed for other reasons.PDC# QI47060