BrightStor CA-1 Tape Management - SupportConnect

s is the reason code from the 3495/3494 LCS services; it indicates why the EXPORT/IMPORT could notbe scheduled. The reason codes can be found in the LCS External Services Parameter List (LCSPL),mapped by IBM macro CBRLCSPL, which is used to pass parameters to the LCS external services, and topass return and reason codes and other information back to the caller. This macro may be found inSYS1.MACLIB. U0999 with a dump may be issued if internal logic errors occur.1.4.2 CTSSYNC ATL RESPONSE LOG Report SampleFUNCTION ATL ACTION STATUS IN TAPE DATABASE .........' ' '' ' '' ' '' ' '' ' '' ' '' ' '' ' 'CTSSYNC report headings and their definitions:FUNCTION - The function or command or parameter that was passed to CTSSYNC. A "SYNC" commandis broken down first into a "QUERY" type transaction (to find out if the cartridge is in the robot or not andwhat its status is if it is inside the robot) and then either a PROTECT command (to change its status fromscratch to private), a SCRATCH command (to change its status from private to scratch) or a SYNCcommand (meaning that it was already in the correct status).ATL ACTION - A description of what the ATL has been asked to do and what its response was.STATUS IN TAPE DATABASE - A description of the status of the cartridge in the tape managementdatabase. This is used only for a SYNC command.ATL ACTION messages and their meanings:VERIFY MODE INITIATED - The VERIFY command had been issued and processed.VERIFY MODE TERMINATED - The NOVERIFY command had been issued and processed.CONVENIENCE DOOR ACTIVE - The NOBULK command was issued and the convenience door will beused for any further EJECT commands.BULK-EJECT DOOR ACTIVE - The BULK command was issued and the bulk door will be used for anyfurther EJECT commands.NO DD STATEMENT FOR IMPORT - An IMPORT command was issued, but the JCL did not contain anIMPORT DD statement.NO DD STATEMENT FOR EXPORT - An EXPORT command was issued, but the JCL did not contain anEXPORT DD statement.WRITTEN TO EXPORT LIST VSN vvvvvv - An EXPORT command was issued and the volume to beexported was written to the export list created on virtual-volume vvvvvv.WRITTEN TO IMPORT LIST VSN vvvvvv - An IMPORT command was issued and the volume to beimported was written to the import list created on virtual-volume vvvvvv.PDC# QI30073