C12 - Quick VeeJet Spray Nozzles - Spraying Systems Co.

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayFlat Spray NozzlesFeatures and Benefits• Flat fan spray pattern with uniform distribution.• Small- to medium-sized drops.• Spray angles 25° to 110° at 40 psi (2.8 bar).• Fast and easy installation of spray tips without tools.• Automatic alignment.• Lower cost – nozzle body can be reused – only spray tips arereplaced.• Miniature versions are ideal when smaller physical size andlower weight are important.• Standard Quick VeeJet have easy-grip spray tips with a seal thatremains attached to the tip to prevent accidental misplacement.• ProMax Quick VeeJet nozzles provide increased chemicalresistance and less build-up. Internal O-ring seal andoptional external O-ring provide additional protection againstcontaminants in harsh environments. See chart for maximumpressures at various temperatures.• ProMax Quick VeeJet spray tips color-coded for easy flowrate identification.• Standard Quick VeeJet spray nozzle assemblies:– Nozzle body, spray tip with integral seal.– Miniature nozzle body, seal, spray tip.• ProMax Quick VeeJet spray nozzle assemblies:– Nozzle body, spray tip and optional external O-ring.– Miniature nozzle body, optional body strainer, tip strainer,external O-ring, spray tip.MiniatureQuickJet ® Bodies• QJJS male inlet connectionsMiniature Quick VeeJet Spray TipsTypical assemblies for Miniature Quick VeeJet nozzles are comprised of a body,seal and spray tip.QSUQSVVQJJS male bodySeal1 gpm (3.9 l/min)or above at 40 psi (2.8 bar)Below1 gpm (3.9 l/min)at 40 psi (2.8 bar)Spray tipPhone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC12

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayStandardQuickJet ® Bodies• QJA female and QJJA maleinlet connections• QJLA female and QJJLA maleinlet connectionsQuick VeeJet Spray TipsTypical Quick VeeJet nozzles are comprised of two components, a body and a spray tip.Each of these spray tips is compatible with either the male or female bodies.QLUAQUAQVVAFlat SprayNozzlesQJA and QJLA female bodies orQJJA and QJJLA male bodies1 gpm (3.9 l/min)or above at 40 psi (2.8 bar)up to a maximum of25 gpm (99 l/min) at40 psi (2.8 bar)1 gpm (3.9 l/min)or above at 40 psi (2.8 bar)up to a maximum of8 gpm (32 l/min) at40 psi (2.8 bar)Below 1 gpm (3.9 l/min)at 40 psi (2.8 bar)Spray tipProMax MiniatureQuickJet Bodies• QPPM male inlet connections• Optional Kynar ® body strainer, 50 meshProMax Miniature Quick VeeJet Spray TipsTypical Miniature Quick VeeJet nozzles are comprised of a QPPM nozzle body and aQMVV spray tip. Options include a Kynar body strainer, Kynar tip strainer and externalO-ring (for harsh environments). Consult your local sales engineer for more informationon the Kynar strainers.QMVVOptional Kynar body strainerRed; .59 l/minGray; .79 l/minBlack; 1.2 l/minOrange; 1.6 l/minQPPM nozzle bodyOptional Kynar tip strainerGreen; 2.0 l/minYellow; 2.4 l/minBlue; 3.2 l/minOptional external O-ring (CP7717-2/13-VI)Capacities at 40 psi (2.8 bar)Spray tipPhone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC13

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayFlat Spray NozzlesProMax QuickJet ®Bodies• QPPA male inlet connectionsQPPA nozzle bodyOptional external O-ring (CP7717-2/17-VI)ProMax Quick VeeJet Spray TipsTypical Quick VeeJet nozzles are comprised of a QPPA nozzle body and a QPTA spray tip.Options include an external O-ring for harsh environments.QPTAWhite; 3.9 l/minGray; 5.9 l/minBlack; 7.9 l/minOrange; 11.8 l/minSpray tipGreen; 15.8 l/minYellow; 19.7 l/minBlue; 24 l/minRed; 28 l/minCapacities at 40 psi (2.8 bar)Optimization TipsSee Alsohttp://• See page C2 for optimization tips.ApplicationsStandard QuickVeeJet Nozzles• Degreasing and rinsing• Metal cleaning and processing• Parts washing/rinsing• Pressure cleaning• Sand, coal and gravel washing• Spray coating• Spray coolingProMax MiniatureQuick VeeJet Nozzles• Carpet cleaning equipment• Printed circuit boardmanufacturingProMax QuickVeeJet Nozzles• Chemical manufacturing• Coating• Cooling• Food processing• Metal finishing• Parts washing/rinsing• Printed circuit boardmanufacturing• Accessories– ProMax QuickJet nozzle adapters– QuickJet adjustable ball fitting bodies– QuickJet nozzle adapters– QuickJet nozzle plugs– QuickJet nozzle plugs for ProMax bodies– QuickJet split-eyelet bodies– UniJet ® nozzle system adapter for QuickJet nozzlesProMax QuickJet nozzle maximum pressuresat various temperaturesPhone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC14

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayPerformance DataSprayAngleat3 bar110°95°80°*At the stated pressure in bar.Quick VeeJet Tip TypeCapacityEquiv.CapacitySpray AngleOrifice(liters per minute)*(°)*Size Dia.QSVV QVVA QSU QUA QLUA QMVV QPTA (mm) 0.4 0.7 1.5 2 3 4 6 7 12† 15†† 20 1.5 3 6 15l l 01 .66 .14 .19 .28 .32 .39 .46 .56 .60 – .88 1.0 94 110 121 124l l l 015 .81 .22 .29 .42 .48 .59 .68 .84 .90 1.2 1.3 1.5 97 110 121 124l l l 02 .91 .29 .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 98 110 120 123l l l 03 1.1 .43 .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 99 110 120 123l l 04 1.3 .58 .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 100 110 119 122l l 05 1.4 .72 .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 100 110 118 122l l 06 1.5 .86 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 101 110 117 122l l l 08 1.8 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 102 110 117 121l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 103 110 117 119l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 104 110 117 118l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 105 110 117 118l l 01 .66 .14 .19 .28 .32 .39 .46 .56 .60 – .88 1.0 81 95 105 113l l 015 .81 .22 .29 .42 .48 .59 .68 .84 .90 1.2 1.3 1.5 82 95 105 113l l 02 .91 .29 .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 82 95 105 113l l 03 1.1 .43 .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 83 95 104 111l l 04 1.3 .58 .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 84 95 103 108l l 05 1.4 .72 .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 84 95 102 107l l 06 1.5 .86 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 86 95 101 106l l 08 1.8 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 87 95 100 105l l l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 89 95 100 105l l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 90 95 100 105l l l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 90 95 100 105l l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 – 26 31 91 95 101 105l l 40 3.8 5.8 7.6 11.2 12.9 15.8 18.2 22 24 – 35 41 92 95 100 105l l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 – 44 51 93 95 99 103l l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 – 53 61 93 95 99 103l l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 – 62 71 93 95 99 103l 100 6.2 14.4 19.1 28 32 39 46 56 60 – 88 102 93 95 99 102l 150 7.5 22 29 42 48 59 68 84 90 – 132 153 93 95 99 102l l 0050 .46 – – .14 .16 .20 .23 .28 .30 – .44 .51 61 80 95 101l l 0067 .53 – .13 .19 .22 .26 .31 .37 .40 – .59 .68 67 80 94 99l l 01 .66 – .19 .28 .32 .39 .46 .56 .60 – .88 1.0 68 80 89 92l l 015 .81 – .29 .42 .48 .59 .68 .84 .90 – 1.3 1.5 68 80 89 92l l l 02 .91 .29 .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 69 80 88 91l l l 03 1.1 .43 .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 70 80 87 90l l l 04 1.3 .58 .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 71 80 86 89l l 05 1.4 .72 .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 71 80 86 89l l l 06 1.5 .86 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 72 80 85 88l l l 08 1.8 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 72 80 84 87†Maximum pressure for QMVV is 12 bar.††Maximum pressure for QPTA is 15 bar.l l l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 73 80 84 87l l l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 74 80 83 86l l l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 74 80 83 86l l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 – 26 31 74 80 83 86Flat SprayNozzlesPhone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC15

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayFlat Spray NozzlesPerformance DataSprayAngleat3 bar80°73°65°*At the stated pressure in bar.Quick VeeJet Tip TypeCapacityEquiv.CapacitySpray AngleOrifice(liters per minute)*(°)*Size Dia.QSVV QVVA QSU QUA QLUA QMVV QPTA (mm) 0.4 0.7 1.5 2 3 4 6 7 12† 15†† 20 1.5 3 6 15l l 40 3.9 5.8 7.6 11.2 12.9 15.8 18.2 22 24 – 35 41 74 80 83 86l l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 – 44 51 74 80 83 85l l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 – 53 61 75 80 83 85l l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 – 62 71 75 80 83 86l 100 6.2 14.4 19.1 28 32 39 46 56 60 – 88 102 75 80 83 86l 150 7.5 22 29 42 48 59 68 84 90 – 132 153 73 80 84 86l 200 8.7 29 38 56 64 79 91 112 121 – 177 204 74 80 82 85l 0023 .30 – – .064 .074 .091 .10 .13 .14 – .20 .23 50 73 89 97l 0039 .41 – .074 .11 .13 .15 .18 .22 .24 – .34 .40 53 73 87 93l 0077 .58 – .15 .21 .25 .30 .35 .43 .46 – .68 .78 53 73 86 92l 0116 .71 .17 .22 .32 .37 .46 .53 .65 .70 – 1.0 1.2 54 73 85 90l 0154 .81 .22 .29 .43 .50 .61 .70 .86 .93 – 1.4 1.6 55 73 84 88l 0231 .96 .33 .44 .64 .74 .91 1.1 1.3 1.4 – 2.0 2.4 56 73 83 87l 0308 1.1 .44 .59 .86 .99 1.2 1.4 1.7 1.9 – 2.7 3.1 58 73 82 86l 0385 1.2 .56 .73 1.1 1.2 1.5 1.8 2.1 2.3 – 3.4 3.9 59 73 81 85l 0462 1.4 .67 .88 1.3 1.5 1.8 2.1 2.6 2.8 – 4.1 4.7 60 73 80 84l 0616 1.6 .89 1.2 1.7 2.0 2.4 2.8 3.4 3.7 – 5.4 6.3 63 73 79 83l 0770 1.7 1.1 1.5 2.1 2.5 3.0 3.5 4.3 4.6 – 6.8 7.8 64 73 77 82l 0924 1.9 1.3 1.8 2.6 3.0 3.6 4.2 5.2 5.6 – 8.2 9.4 65 73 77 80l 0017 .28 – – .047 .055 .067 .078 .095 .10 – .15 .17 44 65 77 86l 0025 .33 – – .070 .081 .099 .11 .14 .15 – .22 .25 45 65 77 84l 0033 .38 – – .092 .11 .13 .15 .18 .20 – .29 .34 47 65 76 83l 0050 .46 – – .14 .16 .20 .23 .28 .30 – .44 .51 48 65 75 82l 0067 .53 – .13 .19 .22 .26 .31 .37 .40 – .59 .68 50 65 75 81l 01 .66 – .19 .28 .32 .39 .46 .56 .60 – .88 1.0 51 65 74 80l 015 .81 – .29 .42 .48 .59 .68 .84 .90 – 1.3 1.5 51 65 74 80l l l 02 .91 .29 .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 52 65 73 79l l l 03 1.1 .43 .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 53 65 72 78l l 04 1.3 .58 .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 53 65 72 76l l 05 1.4 .72 .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 53 65 72 76l l 06 1.5 .86 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 54 65 72 75l l 08 1.8 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 55 65 71 74†Maximum pressure for QMVV is 12 bar.††Maximum pressure for QPTA is 15 bar.l l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 56 65 71 74l l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 56 65 70 73l l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 57 65 70 73l l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 – 26 31 58 65 69 72l l 40 3.9 5.8 7.6 11.2 12.9 15.8 18.2 22 24 – 35 41 59 65 68 72l l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 – 44 51 60 65 68 71l l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 – 53 61 60 65 68 71l l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 – 62 71 60 65 68 71l 100 6.2 14.4 19.1 28 32 39 46 56 60 – 88 102 58 65 69 70l 150 7.5 22 29 42 48 59 68 84 90 – 132 153 59 65 68 70l 200 8.7 29 38 56 64 79 91 112 121 – 177 204 60 65 67 69Phone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC16

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayPerformance DataSprayAngleat3 bar50°40°*At the stated pressure in bar.Quick VeeJet Tip TypeCapacityEquiv.CapacitySpray AngleOrifice(liters per minute)*(°)*Size Dia.QSVV QVVA QSU QUA QLUA QMVV QPTA (mm) 0.4 0.7 1.5 2 3 4 6 7 12† 15†† 20 1.5 3 6 15l 0017 .28 – – .047 .055 .067 .078 .095 .10 – .15 .17 27 50 65 74l 0025 .33 – – .070 .081 .099 .11 .14 .15 – .22 .25 29 50 64 71l 0033 .38 – – .092 .11 .13 .15 .18 .20 – .29 .34 30 50 62 68l 0050 .46 – – .14 .16 .20 .23 .28 .30 – .44 .51 32 50 60 66l 0067 .53 – – .19 .22 .26 .31 .37 .40 – .59 .68 35 50 60 66l 01 .66 – .19 .28 .32 .39 .46 .56 .60 – .88 1.0 37 50 59 65l 015 .81 – .29 .42 .48 .59 .68 .84 .90 – 1.3 1.5 38 50 58 64l l 02 .91 – .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 39 50 57 63l l 03 1.1 .43 .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 40 50 56 62l l 04 1.3 .58 .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 42 50 56 61l l 05 1.4 .72 .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 44 50 56 61l l 06 1.5 .86 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 45 50 56 60l l 08 1.8 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 45 50 55 60l l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 45 50 55 59l l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 45 50 55 59l l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 45 50 55 59l l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 – 26 31 45 50 55 59l l 40 3.9 5.8 7.6 11.2 12.9 15.8 18.2 22 24 – 35 41 46 50 54 59l l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 – 44 51 46 50 54 59l l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 – 53 61 46 50 54 59l l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 – 62 71 46 50 54 59l 100 6.2 14.4 19.1 28 32 39 46 56 60 – 88 102 44 50 52 54l 120 6.7 17.3 23 34 39 47 55 67 72 – 106 122 44 50 53 55l 150 7.5 22 29 42 48 59 68 84 90 – 132 153 45 50 52 55l 200 8.7 29 38 56 64 79 91 112 121 – 177 204 46 50 52 55l 0017 .28 – – .047 .055 .067 .078 .095 .10 – .15 .17 21 40 54 61l 0025 .33 – – .070 .081 .099 .11 .14 .15 – .22 .25 22 40 53 60l 0033 .38 – – .092 .11 .13 .15 .18 .20 – .29 .34 22 40 53 60l 0050 .46 – – .14 .16 .20 .23 .28 .30 – .44 .51 22 40 53 60l 0067 .53 – – .19 .22 .26 .31 .37 .40 – .59 .68 24 40 53 60l 01 .66 – – .28 .32 .39 .46 .56 .60 – .88 1.0 26 40 52 59l 015 .81 – – .42 .48 .59 .68 .84 .90 – 1.3 1.5 27 40 52 59l l 02 .91 – .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 29 40 51 58l l 03 1.1 – .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 30 40 50 57l l 04 1.3 – .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 30 40 50 56l l 05 1.4 – .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 31 40 49 55l l 06 1.5 – 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 31 40 49 55l l 08 1.8 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 31 40 47 53†Maximum pressure for QMVV is 12 bar.††Maximum pressure for QPTA is 15 bar.l l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 32 40 45 48l l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 32 40 45 48l l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 32 40 45 48l l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 – 26 31 33 40 45 48l l 40 3.9 5.8 7.6 11.2 12.9 15.8 18.2 22 24 – 35 41 34 40 45 48Flat SprayNozzlesPhone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC17

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayFlat Spray NozzlesPerformance DataSprayAngleat3 bar40°25°15°*At the stated pressure in bar.Quick VeeJet Tip TypeCapacityEquiv.CapacitySpray AngleOrifice(liters per minute)*(°)*Size Dia.QSVV QVVA QSU QUA QLUA QMVV QPTA (mm) 0.4 0.7 1.5 2 3 4 6 7 12† 15†† 20 1.5 3 6 15l l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 – 44 51 35 40 45 48l l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 – 53 61 35 40 45 48l l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 – 62 71 35 40 45 48l 100 6.2 14.4 19.1 28 32 39 46 56 60 – 88 102 34 40 43 46l 150 7.5 22 29 42 48 59 68 84 90 – 132 153 35 40 43 44l 200 8.7 29 38 56 64 79 91 112 121 – 177 204 36 40 42 44l 0017 .28 – – – .055 .067 .078 .095 .10 – .15 .17 – 25 35 47l 0025 .33 – – – .081 .099 .11 .14 .15 – .22 .25 – 25 35 45l 0033 .38 – – – .11 .13 .15 .18 .20 – .29 .34 – 25 34 44l 0050 .46 – – – .16 .20 .23 .28 .30 – .44 .51 – 25 34 43l 0067 .53 – – – .22 .26 .31 .37 .40 – .59 .68 – 25 34 42l 01 .66 – – .28 .32 .39 .46 .56 .60 – .88 1.0 14 25 34 42l 015 .81 – – .42 .48 .59 .68 .84 .90 – 1.3 1.5 15 25 34 41l l 02 .91 – – .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0 15 25 33 40l l 03 1.1 – – .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1 15 25 33 40l l 04 1.3 – .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1 16 25 32 39l l 05 1.4 – .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1 16 25 32 39l l 06 1.5 – 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1 17 25 31 38l l 08 1.8 – 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2 17 25 31 38l l 10 2.0 – 1.9 2.8 3.2 3.9 4.6 5.6 6.0 – 8.8 10.2 18 25 31 37l l 15 2.4 – 2.9 4.2 4.8 5.9 6.8 8.4 9.0 – 13.2 15.3 18 25 31 37l l 20 2.8 – 3.8 5.6 6.4 7.9 9.1 11.2 12.1 – 17.7 20 19 25 31 37l l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 – 26 31 20 25 30 36l l 40 3.9 5.8 7.6 11.2 12.9 15.8 18.2 22 24 – 35 41 21 25 29 35l l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 – 44 51 21 25 29 35l l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 – 53 61 22 25 29 35l l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 – 62 71 22 25 29 35l 100 6.2 14.4 19.1 28 32 39 46 56 60 – 88 102 23 25 28 32l 150 7.5 22 29 42 48 59 68 84 90 – 132 153 24 25 28 30l 200 8.7 29 38 56 64 79 91 112 121 – 177 204 24 25 26 29l 0017 .28 – – – .055 .067 .078 .095 .10 – .15 .17 – 15 30 37l 0025 .33 – – – .081 .099 .11 .14 .15 – .22 .25 – 15 28 34l 0033 .38 – – – .11 .13 .15 .18 .20 – .29 .34 – 15 27 32l 0050 .46 – – – .16 .20 .23 .28 .30 – .44 .51 – 15 26 30l 0067 .53 – – – .22 .26 .31 .37 .40 – .59 .68 – 15 25 29l 01 .66 – – – .32 .39 .46 .56 .60 – .88 1.0 – 15 24 28l 015 .81 – – – .48 .59 .68 .84 .90 – 1.3 1.5 – 15 23 27l 02 .91 – – .56 .64 .79 .91 1.1 1.2 – 1.8 2.0 6 15 22 27l 03 1.1 – – .84 .97 1.2 1.4 1.7 1.8 – 2.6 3.1 6 15 22 27l 04 1.3 – – 1.1 1.3 1.6 1.8 2.2 2.4 – 3.5 4.1 7 15 21 26l 05 1.4 – – 1.4 1.6 2.0 2.3 2.8 3.0 – 4.4 5.1 7 15 21 26l 06 1.5 – – 1.7 1.9 2.4 2.7 3.4 3.6 – 5.3 6.1 8 15 21 26l 08 1.8 – – 2.2 2.6 3.2 3.6 4.5 4.8 – 7.1 8.2 9 15 20 25†Maximum pressure for QMVV is 12 bar.††Maximum pressure for QPTA is 15 bar.Phone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC18

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayPerformance DataSprayAngleat3 bar15°0°*At the stated pressure in bar.Quick VeeJet Tip TypeCapacityEquiv.CapacitySpray AngleOrifice(liters per minute)*(°)*Size Dia.QSVV QVVA QSU QUA QLUA QMVV QPTA (mm) 0.4 0.7 1.5 2 3 4 6 7 12† 15†† 20 1.5 3 6 15l 10 2.0 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 7.9 8.8 10.2 10 15 19 24l 15 2.4 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 11.8 13.2 15.3 10 15 19 24l 20 2.8 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 15.8 17.7 20 10 15 19 23l 30 3.4 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 24 26 31 10 15 19 21l 40 3.9 5.8 7.6 11.2 12.9 15.8 18.2 22 24 32 35 41 10 15 18 21l 50 4.4 7.2 9.5 14.0 16.1 19.7 23 28 30 39 44 51 11 15 18 21l 60 4.8 8.6 11.4 16.8 19.3 24 27 34 36 47 53 61 11 15 18 21l 70 5.2 10.1 13.3 19.5 23 28 32 39 42 55 62 71 11 15 18 21l 100 6.2 14.4 19.1 28 32 39 46 56 60 79 88 102 13 15 17 18l 120 6.8 17.3 23 34 39 47 55 67 72 95 106 122 13 15 17 18l 150 7.5 22 29 42 48 59 68 84 90 118 132 153 14 15 17 18l 200 8.7 29 38 56 64 79 91 112 121 158 177 204 14 15 17 18l 0009 .20 .013 .017 .025 .029 .036 .041 .050 .054 .071 .079 .092l 0012 .25 .017 .023 .034 .039 .047 .055 .067 .072 .095 .11 .12l 0019 .30 .027 .036 .053 .061 .075 .087 .11 .11 .15 .17 .19l l 0021 .33 .030 .040 .059 .068 .083 .096 .12 .13 .17 .19 .21l 0050 .48 .072 .095 .14 .16 .20 .23 .28 .30 .39 .44 .51l 0067 .58 .097 .13 .19 .22 .26 .31 .37 .40 .53 .59 .68l 01 .71 .14 .19 .28 .32 .39 .46 .56 .60 .79 .88 1.0l 015 .86 .22 .29 .42 .48 .59 .68 .84 .90 1.2 1.3 1.5l 02 .99 .29 .38 .56 .64 .79 .91 1.1 1.2 1.6 1.8 2.0l l 03 1.2 .43 .57 .84 .97 1.2 1.4 1.7 1.8 2.4 2.6 3.1l l 04 1.4 .58 .76 1.1 1.3 1.6 1.8 2.2 2.4 3.2 3.5 4.1l l 05 1.6 .72 .95 1.4 1.6 2.0 2.3 2.8 3.0 3.9 4.4 5.1l l 06 1.7 .86 1.1 1.7 1.9 2.4 2.7 3.4 3.6 4.7 5.3 6.1l l 08 2.0 1.2 1.5 2.2 2.6 3.2 3.6 4.5 4.8 6.3 7.1 8.2†Maximum pressure for QMVV is 12 bar.††Maximum pressure for QPTA is 15 bar.l 10 2.2 1.4 1.9 2.8 3.2 3.9 4.6 5.6 6.0 7.9 8.8 10.2l 15 2.7 2.2 2.9 4.2 4.8 5.9 6.8 8.4 9.0 11.8 13.2 15.3l 20 3.1 2.9 3.8 5.6 6.4 7.9 9.1 11.2 12.1 15.8 17.7 20l 30 3.6 4.3 5.7 8.4 9.7 11.8 13.7 16.8 18.1 24 26 31l 40 4.1 5.8 7.6 11.2 12.9 15.8 18.2 22 24 32 35 41l 50 4.2 7.2 9.5 14.0 16.1 19.7 23 28 30 39 44 51l 60 4.6 8.6 11.4 16.8 19.3 24 27 34 36 47 53 61l 70 5.0 10.1 13.3 19.5 23 28 32 39 42 55 62 71l 80 5.3 11.5 15.3 22 26 32 36 45 48 63 71 82l 100 6.0 14.4 19.1 28 32 39 46 56 60 79 88 102l 120 6.8 17.3 23 34 39 47 55 67 72 95 106 122l 150 7.3 22 29 42 48 59 68 84 90 118 132 153l 200 8.5 29 38 56 64 79 91 112 121 158 177 204l 250 9.5 36 48 70 81 99 114 140 151 197 221 2550Solid StreamFlat SprayNozzlesPhone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC19

Quick and ProMax ® Quick VeeJetSpray Nozzles, Standard SprayFlat Spray NozzlesDimensions and WeightsStandardNozzleTypeLength(mm)Hex.(mm)Width(mm)NetWeight(kg)QJJS+QSVV 28 14.3 – .03QJJS+QSU 30 14.3 – .03QJA+QVVA 55 25.4 – .07QJJA+QVVA 53 25.4 – .06QJA+QUA 51 25.4 – .08QJJA+QUA 49 25.4 – .06QJLA+QLUA 59 28.6 – .13QJJLA+QLUA 60 28.6 – .12Body TypesInletConn.(in.)Conn.FStandard BodyConn.MQJA QJLA QJJS QJJA QJJLA QPPM QPPA1/8 l l l l l1/4 l l l l l3/8 l l l l l1/2 l l l lMaterialsQPPM+QMVV 30 15.9 – .003MaterialMaterialCodeSpray TipQSVV QSU QVVA QUA QLUAQPPA+QPTA 44.5 22.2 32 .007Based on largest/heaviest version of each type.Brass (none) l l l l l303 Stainless Steel SS l l l l lStandard Quick VeeJet nozzles available in either brass with a Buna-Nseal or stainless steel with a Viton ® seal.ProMax Quick VeeJet nozzles available with a Viton seal.Miniature ProMax spray tips and bodies have an optional Kynar ® bodystrainer, optional tip strainer. See Section K, Special Purpose SprayNozzles for more details or contact your local representative.Ordering InfoStrainer Ordering InfoNozzle BodyQuick VeeJet Complete NozzleSpray Tip1/4 QJJA – SS + QVVA – SS 110 10I I I I I I IInletConn.BodyTypeMaterialCodeTipTypeMaterialCodeSprayAngleCapacitySizeFor NozzleSeriesBodyStrainerOrder No.TipStrainerOrder No.1/8 QPPM+QMVV CP39212-1-KY CP45095-KY1/4 QPPM+QMVV CP39212-2-KY CP45095-KYProMax Quick VeeJet Complete NozzleNozzle BodySpray Tip1/4 QPPM + QMVV 50 02I I I I IInletConn.BodyTypeTipTypeSprayAngleAdd “A” to the capacity size for external O-ring. Example: 02ACapacitySizeBSPT connections require the addition of a “B” prior to the nozzle bodyinlet connection.Phone 1(630) 665-5000, FAX 1(630) 260-0842Visit Our Web Site: www.spray.com, Email: info@spray.comC20