Download Premier Crown 2010 Catalog - Sirchie

TERMS AND CONDITIONS OF SALEAll prices are F.O.B. Youngsville, North Carolina or our shipping point. All orders are subject to acceptance byPremier Crown ® . All prices are subject to change without notice.terms of paymentPrepayment must be made in U.S. funds by individuals and privateindustry and must include shipping and handling charges or writtenauthorization to forward order with the shipping charges C.O.D.Open Billing is extended to all U.S., federal, state, county and municipalagencies. Orders must be accompanied by a purchase ordernumber or a voucher.Minimum Order amount in the U.S. is $25.00. For internationalorders, please see below.Credit may be extended to private industry after credit references areaccepted by Premier Crown® in Youngsville, N.C.Handling Charges are an additional $5.00 net for all domestic orders.This amount will be added to your order when applicable.Drop Ship Charges are an additional $2.00 for all domestic orders.This amount will be added to your order when applicable.Sales Tax is applied to all orders shipped within North Carolina unlessexempt. Please include or advise Premier Crown® of your resale ortax exempt certificate number.Shipments in the U.S.A. are made F.O.B. Youngsville, NC via UnitedParcel Service (UPS), Fed Ex or U.S. Parcel Post Service according tothe prevailing rates. Shipments made by other carriers including airfreight, common carrier or express mail delivery as required by thecustomer will be charged at the prevailing rate.Returned Goods and Exchanges are not accepted unless authorizedby Premier Crown® in advance. All returns must have a returnauthorization number issued by Premier Crown’s Customer ServiceDepartment. Products offered for return must be unused and in theiroriginal packaging. Products approved for return must be returnedfreight prepaid within seven business days of issuance of return authorizationnumber. Products approved for return will be subject to arestocking fee of 20% of the original invoice amount.Special ordered or non-inventoried products are not returnable underany conditions.International Orders require either a prepayment via: (1) a certifiedcashier’s check drawn on any major U.S. bank or (2) a transfer offunds (contact Premier Crown Corp.’s sales department for bank wireinformation), or (3) an irrevocable letter of credit advised and confirmedby a major U.S. bank payable in U.S. dollars at sight upon standardproof of shipment.All banking charges, including those of negotiating and paying banks,documentation, and legalization/authentication are to be paid by thepurchaser.Premier Crown Corp. has a service charge of $450.00 for handlingletters of credit.Pro forma invoices will be supplied upon request.U.S. Export LicensesShipments to any overseas installation, except members of NATO,require an individual validated export license issued by the U.S. Departmentof Commerce. Form BXA-711 must be submitted with thelicense application. Failure to include this form delays the licensingprocedure. Properly documented license applications are normallyapproved within 60 days. Form BXA-711 may be obtained from theU.S. Embassy or consulates.It is the buyer’s responsibility, not Premier Crown®’s, to obtain thislicense, unless agreed upon otherwise. Premier Crown® reserves theright to refuse shipment to any exporter who has not satisfactorilyshown their compliance with applicable export regulation.Orders will not be processed by Premier Crown® until satisfactoryterms of payment are established and the export license is complete.Minimum Orders are as follows:Not requiring an export license..............................$250.00Requiring a validated export license.......................$500.00Shipping, export packing and handling charges are not included.PREMIER CROWN ®a Division of SIRCHIE100B Hunter PlaceYoungsville, North Carolina 27596 U.S.A.Phone: (919) 554-0337 • Toll Free: (800) 356-7311 • Fax: (800) 899-8181Web: www.premiercrown.comThe Department of Transportation Standard, D.O.T. FMVSS218, establishes performance requirements for helmets designed for use by motorcyclists.Premier Crown ® helmets are not intended for vehicular use.Prices, charges, illustrations, specifications, and descriptions are subject to change without notice at the discretion of the manufacturer, PremierCrown® or its subcontractors. All rights reserved. Reproduction or use, without express permission, of written or pictorial content in any manneris prohibited. While every precaution has been taken in the preparation of this manual, the manufacturer and publisher assume no responsibilityfor errors or omissions.Copyright © 2009 Premier Crown ® SP549R1 (10/09)

premierCROWN ®Premier Crown ® Headquartersin Youngsville, North CarolinaTactical Duty helmets...................2protective body shields............. 12tactical gear.................................... 14general Duty helmets................. 15bioshield ® products......................23inspection mirrors........................24GUNPOWDER TEST KITS....................25Established in 1979, P r e m i e r Crown ®is honored to continue providing high-qualitytactical and safety equipment needed to protect the wellbeing of our nation’s law enforcement and correctionalofficers, as well as all law enforcement professionalsaround the world. We pride ourselves on providingquality products through a company-wide commitmentthat incorporates progressive production techniques,state-of-the-art machinery and continuous product research,development and improvement. Premier Crown ®has developed new products that will greatly increase thecapability of tactical operations for riot control squads andcorrectional cell extraction teams.NIJ Testing for Riot Duty HelmetsPREMIER CROWN ®Riot Duty Helmets are designed to meetand exceed the requirements of the National Institute of JusticeStandards for Riot Helmets NIJ0104.02. In addition to providingproper user information and being properly labeled, NIJ complianthelmets are required to attenuate severe impacts from blunt objectsand to prevent penetration by sharp objects at temperatures rangingfrom 14°F (-10°C) to 122°F (50°C). NIJ0104.02 also requires ariot helmet retention system to remain securely fastened withoutbreaking, slipping or stretching more than one inch when placedunder a static load test.NIJ0104.02 does not include requirements for vehicular crash orany level ballistic capabilities. PREMIER CROWN ® helmets arenot designed or intended for vehicular use or ballistic protection.PREMIERCROWN ®100B Hunter PlaceYoungsville, North Carolina 27596 U.S.A.Phone: (919) 554-0337 • (800) 356-7311Fax: (800) 899-8181Website: www.premiercrown.com

DUTYTACTICAL DUTYNon-VehicularTACTICALBuilding a Better Riot HelmetPREMIER CROWN ® is dedicated to manufacturing highqualityriot helmets. Riot helmets provide protection throughfour main components: 1. the outer helmet shell; 2. the innerhelmet liner; 3. the retention system; and 4. the face shield.Helmet Shells — The outer helmet shell is the first defenseagainst blunt trauma and penetration by sharp objects. In addition,our two types of helmet shells are both highly resistant toharsh chemicals.TacElite EPR Engineered Polymer Resin — Engineered plasticresin providing high level impact protection and protectionagainst penetration by sharp objects that exceeds NIJ0104.02requirements. Outperforms standard polycarbonate helmet shellsin Izod impact testing and chemical resistance testing. TacEliteEPR does not offer ballistic protection.TacElite TCM Tactical Composite Matrix — Proprietary, lightweight,fiberglass composite helmet shell fabrication providinghigh-level impact protection and protection against penetrationby sharp objects that exceeds NIJ0104.02 requirements. TacEliteTCM does not offer ballistic protection.Helmet Liners — The core of the helmet is the EPS foam liner.The foam liner is responsible for absorbing and reducing theenergy of an impact. The foam liner of our helmets is coveredwith a sweat-wicking, antifungal and antimicrobial padded innerliner to provide maximum comfort and cleanliness.Retention System — A riot helmet is useless if it does not stayfirmly in place on an officer’s head during a tactical encounter.Premier Crown fabricates our retention systems to exacting qualitycontrol standards using military specification tubular nylonwebbing. Our fasteners are either stamped steel D-rings or ournew Echo® quick-release buckle. Simply put, when properlysized and secured, our helmet will not come off your head untilyou want it to.Face Shields — The face shield is intended to protect the userfrom facial impacts and dangerous liquids. Premier Crown faceshields are 3.8 mm thick, UV stable polycarbonate. Polycarbonateprovides high-level impact protection and excellent opticalproperties. All Premier Crown helmets feature a chemical resistantsoft rubber liquid seal on the top edge of the face shieldto prevent dangerous liquids from running off the helmet shellinto an officer’s eyes.LiquiTac Face Shield System — Our models 900 and FXR2000feature an advanced face shield system to provide increasedfacial protection and a more slim design. The LiquiTac systemutilizes a lightweight, high-strength aluminum band to attachthe face shield to our ratchet-type face shield brackets.4 Premier Crown ® • www.premiercrown.com

DUTYTACTICAL DUTYNon-VehicularTACTICAL906 Riot Duty HelmetOur most popular tactical helmet provides outstanding protection andsuperior comfort. The model 906 features an optically clear, UV resistant,polycarbonate face shield with an integrally molded liquid seal.The model 906 is trusted by thousands of law enforcement agencies aroundthe world to protect their valuable men and women in any riot situation.906 specifications• TacElite EPR polycarbonate alloy helmet shell.(See page 2 for details)• Expanded polystyrene liner with padded, sweatwickinginner liner• Permanently mounted neck protector with Kydex ®penetration shield and shock absorbent foam pad• Detachable .150” (3.8mm) thick face shield withliquid seal prevents liquids from seeping intoofficer’s eyes• Molded lip on top edge of face shield preventsshield from closing over integral visor and strikingthe face• Double D-ring fastener provides maximum strengthand slip resistancee. Optional NIJ compliantquick release buckle available. (See facing page)• Snap-on nape pad with Kydex ® penetration shield,shock-absorbent foam pads and chemical-resistantblack Cordura ® cover• Plastic chin cup for added comfort when harness istightened. Optional chin pad available. (See facingpage)• Face guard: 0.125” (3.2mm) diameter steel wirewith black nylon coating and welded joints formaximum strength and safety. Wire guard is formfitted to match radius of face shield and is attachedby four heavy-duty nylon clips. Viewing area: 2 3 / 4”x 8 1 / 2” (7.0cm x 21.6cm) (Model 906C only)• Weight Model 906: 3.2 lbs. (1.5 Kg)• Weight Model 906FS6: 3.2 lbs. (1.5 Kg)• Weight Model 906C: 4 lbs. (1.8 Kg)• Meets or exceeds NIJ Standard for Riot Helmets,NIJ 0104.02*• Meets or exceeds DOT Standard for Motor VehicleHelmets FMVSS218 for Impact and Retention Only.available colorsBlack BrownMidnight Blue Olive Drab GreenModel 906 SizesUniversal: 6 1 / 2” - 7 5 / 8” (16.5cm - 19.4cm)XL: 7 3 / 4” - 8 1 / 8” (19.7cm - 20.6cm)Jumbo: 8 1 / 4” - 8 1 / 2” (20.9cm - 21.6cm)BlackBrown*The U.S. Department of Transportation Standard, D.O.T.FMVSS218, establishes performance requirements for helmetsdesigned for use by motorcyclists. PREMIER CROWN ® Model906 is not intended for vehicular use.BlueOlive Drab GreenCAT. NO. HELMET Price906 Tacelite epr RIOT DUTY HELMET $106.25906FS6 w/ gas mask face shield $118.50906C w/ wire guard face shield $119.996 Premier Crown ® • www.premiercrown.com

ACCESSORIESACCESSORIESabcdfeh,ija. Interior Liner kitAllows helmet to be used by different officers.Strips are provided for head sizeadjustment.Cat. No. ILK1 .................... $21.50b. Screw, Spacer andWasher KitAttaches face shield to helmet.Cat. No. SSWK906 .............. $4.25c. chin padSweat absorbent chin pad is 1 / 4 ” thick foradded comfort.Cat. No. CP1 ....................... $6.96D. chin cupProtects chin.Cat. No. CC1 ....................... $4.85E. standard face shieldShield is 0.15” (3.8 mm) thick and hasa liquid seal.Cat. No. FS4 ...................... $25.85f. gas mask face shieldShield is 0.15” (3.8 mm) thick and hasa liquid seal. Designed to accommodategas mask.Cat. No. fs6 ...................... $30.75G. corrections faceshieldShield is 0.15” (3.8 mm) thick with aliquid seal and wire face guard.Cat. No. FS4C .................... $39.50H. cordura ® nape padProtects neck. Snaps on. Chemical resistant.Cat. No. nap1 ................... $19.95I. NOMEX ® nape padProtects neck. Snaps on. Fire retardant.Cat. No. NAP4 ................... $24.95J. carrying bagPadded nylon carry bag with cordlockclosure.Cat. No. CB1 ..................... $21.00K. Quick release BuckleOur quick releasebuckle attachesmetal to metal forincreased retentionstrength to meet the NIJ standard for retention.The metal latches are encased inplastic for maximum comfort and ease ofuse. Can be installed on existing helmetswith D-rings.Cat. No. QRB2 ..................... $7.85Model 906FS6 pictured withPC1000 gas mask.Front view of model 906C.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 7G

DUTYTACTICAL DUTYNon-VehicularTACTICAL900LT Riot Duty HelmetThe PREMIER CROWN ®Model 900LT offers a liquid seal and a stablebracket face shield mounting system.It is engineered from the inside out for protection in the most abusive situations.900 specifications:• TacElite EPR polycarbonate alloy helmet shell(see page 2 for details)• EPS foam liner with sweat-wicking, antifungal andantimicrobial padded inner liner to provide maximumcomfort and cleanliness• Permanently mounted neck protector with Kydex ®penetration shield and shock-absorbent foam pad• LiquiTac Face Shield System — Our model 900features an advanced face shield system designedto provide increased facial protection and a slimlinelook. The LiquiTac system utilizes a lightweight,high-strength aluminum band to attach theface shield to our ratchet-type face shield brackets• Optically clear, 0.15” (3.8 mm) thick polycarbonateface shield• Double D-ring fastener provides maximum strengthand slip resistance. Optional NIJ compliant quickrelease buckle available. (See facing page)• Snap-on nape pad with Kydex ® penetration shield,shock absorbent foam pads and chemical-resistantblack Cordura ® Cover• Plastic chin cup for added comfort when harness istightened. (Optional chin pad available. See facingpage)• Weight (Model 900LT): 3.35 lbs. (1.52 Kg)• Weight (Model 900LTC): 4.15 lbs. (1.88 Kg)• Meets or exceeds NIJ Standard for Riot Helmets,NIJ 0104.02*available colorsBlack BrownMidnight BlueOlive Drab GreenModel 900LT Sizes:Universal: 6 1 / 2”- 7 5 / 8” (16.5cm - 19.4cm)XL: 7 3 / 4” - 8 1 / 8” (19.7cm - 20.6cm)Jumbo: 8 1 / 4” - 8 1 / 2” (20.9cm - 21.6cm)BlackBrown*The U.S. Department of Transportation Standard,D.O.T. FMVSS218, establishes performance requirementsfor helmets designed for use by motorcyclists.PREMIER CROWN ® Model 900 is not intended forvehicular use.BlueOlive Drab GreenCAT. NO. HELMET Price900lT Liquitac RIOT DUTY HELMET $106.25900LTC w/ wire guard face shield $124.958 Premier Crown ® • www.premiercrown.com

ACCESSORIESACCESSORIESa b cfdeg,hia. Interior Liner KitAllows helmet to be used by differentofficers. Strips are provided for headsize adjustment.Cat. No. ILK1 .................... $21.50b. chin padSweat absorbent chin pad is 1 / 4 ” thickfor added comfort.Cat. No. CP1 ....................... $6.96c. chin cupProtects chin.Cat. No. CC1 ....................... $4.85D. FACE SHIELDUV stable, PC face shield with liquidseal and metal mounting band.Cat. No. FS2LT .................. $24.95e. corrections FACESHIELDLiquiTac face shield with wireguard.Cat. No. FS2LTC ................ $42.95f. Cover Plate KitCover plate kit features 2 ea. 1 / 4 -20 x1/ 2 ” screws and 2 cover plates.g. cordura ® nape padProtects neck. Snaps on. Chemicalresistant.Cat. No. nap1 ................... $19.95H. NOMEX ® nape padProtects neck. Snaps on. Fire retardant.Cat. No. NAP4 ................... $24.95i. carrying bagPadded nylon carry bag with cordlockclosure.Cat. No. CB1 ..................... $21.00j. Quick releaseBuckleOur quick releasebuckleattaches metalto metal for increasedretentionstrength to meet the NIJ standardfor retention. Metal latches are encasedin plastic for maximum comfort andease of use. Can be installed on existinghelmets with D-rings.Cat. No. QRB2 ..................... $7.85Front view of Model 900LTC.Cat. No. LTCP....................... $5.95Rear view of Model 900LT withnape pad.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 9

DUTYTACTICAL DUTYNon-VehicularTACTICALFXR2000LTRiot Duty HelmetThe FXR2000LT offers complete head protection. The TacElite EPR fullcoverage helmet shell provides increased protection of the ears and neckcompared to traditional helmets that use ABS plastic for ear and neck protection.The FXR2000LT withstands blows from clubs, ice picks, and rocks.It will not crack in cold weather or soften in hot weather.The LiquiTac face shield system fits closely around the helmet shell toprovide optimal impact and dangerous liquid protection.fxr2000LT SPECIFICATIONS:• TacElite EPR polycarbonate alloy full coverageshell (See p.2 for details)• Expanded polystyrene liner with padded, sweatwickinginner liner• Double D-ring fastener provides maximumstrength and slip resistance. Optional NIJ compliantquick release buckle available. (See facingpage)• Snap-on nape pad with Kydex ® penetrationshield, shock absorbent foam pads and chemicalresistant black Cordura ® cover• Plastic chin cup for added comfort when harnessis tightened. Optional chin pad available.(See facing page)• LiquiTac Face Shield System (See p.2 fordetails)• Optically clear, 0.15” (3.8mm) thick polycarbonate• Face guard (Model FXR2000LTC only): .125”(3.2 mm) diameter steel wire with black nyloncoating and welded joints for maximum strengthand safety. Wire guard is form fitted to matchradius of face shield and is attached by fourheavy-duty nylon clips. Viewing area: 2-3/4” x8-1/2” (7.0 cm x 21.6 cm)• Weight (Model FXR2000LT): 3.5 lbs. (1.6 Kg)• Weight (Model FXR2000LTC): 4.3 lbs. (1.9 Kg)• Meets or exceeds NIJ Standard for Riot Helmets,NIJ 0104.02*available colorsBlackBrownMidnight Blue Olive Drab GreenModel FXR2000LT Sizes:Universal: 6 1 / 2” - 7 5 / 8” (16.5cm - 19.4cm)XL: 7 3 / 4” - 8 1 / 8” (19.7cm - 20.6cm)BlackBrown*The U.S. Department of Transportation Standard,D.O.T. FMVSS218, establishes performance requirementsfor helmets designed for use by motorcyclists.PREMIER CROWN ® Model FXR2000LT is not intendedfor vehicular use.BlueOlive Drab GreenCAT. NO. HELMET PriceFXR2000LT RIOT DUTY HELMET $119.95FXR200LTC w/ wire guard face shield $134.9510 Premier Crown ® • www.premiercrown.com

ACCESSORIESACCESSORIESabcgefh,idja. Interior Liner kitAllows helmet to be used by differentofficers. Strips are provided for headsize adjustment.Cat. No. ILK1 .................... $21.50b. chin padSweat absorbent chin pad is 1 / 4 ” thickfor added comfort.Cat. No. CP1........................ $6.96c. chin cupProtects chin.Cat. No. CC1 ....................... $4.85d. ear padsProtects ears.Cat. No. ep1........................ $8.95e. FACE SHIELDUV stable, PC face shield with liquidseal and metal mounting band.Cat. No. FS2LT .................. $24.95F. corrections FACESHIELDLiquiTac face shield with wireguard.Cat. No. FS2LTC ................ $42.95G. Cover Plate KitCover plate kit features 2 ea. 1 / 4 -20 x1/ 2 ” screws and 2 cover plates.Cat. No. LTCP....................... $5.95h. cordura ® nape padProtects neck. Snaps on. Chemicalresistant.Cat. No. nap2 ................... $19.95i. NOMEX ® nape padProtects neck. Snaps on. Fire retardant.Cat. No. NAP5 ................... $24.95j. carrying bagPadded nylon carry bag with cordlock.Cat. No. CB2 ..................... $24.50k. Quick releaseBuckleOur quick releasebuckleattaches metalto metal for increasedretentionstrength to meet the NIJ standardfor retention. Metal latches are encasedin plastic for maximum comfort andease of use. Can be installed on existinghelmets with D-rings.Cat. No. QRB2 ..................... $7.85Front view of Model FXR2000LTC.Rear view of Model FXR2000LT.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 11

DUTYTACTICAL DUTYNon-VehicularTACTICALjcr100 specifications:• TacElite TCM fiberglass shell which gives highimpact,abrasion and penetration resistance (Seep. 2 for details)• Clearance on sides of helmet to accommodatea radio transmitter and receiver and sufficientclearance for use over gas mask• Expanded polystyrene liner provides excellentimpact protection• Molded ABS inner liner for easy cleaning• Steel double D-ring fastener provides maximumstrength and slip resistance. Optional NIJ compliantquick release buckle available. (See facingpage)• Interchangeable sweat-wicking sizing comfortpads — 1/4” (6.4mm), 3/8” (9.5mm) and 1/2”(12.7mm) thick• Optically clear, 0.15” (3.8mm) thick polycarbonateface shield with pivot plus lock system for upand down positions• Face guard (Model JCR100C only): .125”(3.2mm) diameter steel wire with black nyloncoating and welded joints for maximum strengthand safety. Wire guard is form fitted to matchradius of face shield and is attached by fourheavy-duty nylon clips. Viewing area: 2-3/4” x8-1/2”(7.0cm x 21.6cm).• Weight (Model JCR100): 3.34 lbs. (1.5 Kg)• Weight (Model JCR100C): 4.1 lbs. (1.85 Kg)• Meets or exceeds NIJ Standard for Riot Helmets,NIJ 0104.02*• Nape pad optional (see page 11)available colorStealth BlackMODEL JCR100 SIZESsmall: 6” - 6 5 / 8” (15.2cm - 16.8cm)MEDIUM: 6 3 / 4” - 7 1 / 2” (17.1cm-19.1cm)LARGE/XL: 7 5 / 8” - 8 1 / 2” (19.4cm-21.6cm)JCR100 Riot Duty Helmet*The U.S. Department of Transportation Standard,D.O.T. FMVSS218, establishes performance requirementsfor helmets designed for use by motorcyclists.PREMIER CROWN ® Model JCR100 is not intendedfor vehicular use.The Model JCR100 is our most versatile riot duty helmet. The polycarbonate face shield is designed to provide additional head spaceto accommodate a gas mask or radio transmitter and receiver. A new and improved pivot system makes face shield adjustment aseasy as turning a dial. The molded ABS inner lining is designed for easy cleaning.CAT. NO. HELMET PriceJCR100 RIOT DUTY HELMET $134.95JCR100C w/ wire guard face shield $149.9512 Premier Crown ® • www.premiercrown.com

iACCESSORIESACCESSORIESabdcef, g ha. sizing kitAdjusts helmet to fit different headsizes. Includes 1 / 4 ”, 3 / 8 ” and 1 / 2 ” pads.Cat. No. sk1 ..................... $10.95b. Screw, Spacer andbracket KitAttaches face shield to helmet converterband.Cat. No. SbKjcr ................. $7.25c. helmet converterbandAttaches face shield to helmet andprovides a liquid seal.Cat. No. HCB2 ................... $14.75d. chin padSweat absorbent chin pad is 1 / 4 ” thickfor added comfort.Cat. No. CP1 ....................... $6.96E. chin cupProtects chin.Cat. No. CC1 ....................... $4.85F. cordura ® nape padProtects neck. Snaps on. Chemicalresistant.Cat. No. nap1 ................... $19.95G. NOMEX ® nape padProtects neck. Snaps on. Fire retardant.Cat. No. NAP4 ................... $24.95H. carrying bagPadded nylon carry bag with cordlockclosure.Cat. No. CB2 ..................... $24.50I. standard face shieldUV stable, polycarbonate face shield is0.15” (3.8 mm) thick.Cat. No. FS1 ...................... $24.50J. corrections faceshieldStandard face shield with wire guard.Cat. No. FS1C .................... $39.50K. smoke lens coverConceals officer’s identity. Easy to applyand remove. Sold in pack of five.Cat. No. SLC5 .................... $11.95L. Quick releaseBuckleOur quick releasebuckleattaches metalto metalfor increasedretention strength to meet the NIJstandard for retention. Metal latches areencased in plastic for maximum comfortand ease of use. Can be installed onexisting helmets with D-rings.Cat. No. QRB2 ..................... $7.85Front view of Model JCR100C.The JCR100 is pictured with theSLC5 smoke lens cover.jkPhone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 13

SHIELDSBODY SHIELDSBODY4100specifications:• Tough, injection-molded, clear polycarbonateshield is .150” thick (3.8 mm)• UV-resistant polycarbonate allows visibility upto 88% light transmission.• Ergonomic injection-molded handle is 1.25”(31.8mm) diameter. (Models 3100 and5100)• Rubber-coated steel handle (Model 4100)• .75” (19mm) Shock-absorbing foam pad protectsuser’s forearm.• 5” (12.7cm) Wide decal with white letters onblack background allows easy identification ofofficers.• Five standard decals available: CORRECTIONS,POLICE, POLICIA, SHERIFF, plain black.POLICEPOLICIA31005100Torso Length Body ShieldsPremier Crown mid-size riot body shields are fabricated from a clear, highstrength,UV-stable polycarbonate resin. The 36" high x 20" wide shields arelightweight and shatter-resistant. Visibility is undistorted. Our shields offerideal protection from clubs and thrown objects such as bottles, bricks androcks. The shock absorbing foam pad provides maximum protection for theuser's forearm and hands. The Velcro ® release nylon arm strap on models3100 and 4100 are fully adjustable yet secure enough to stay fastened duringtactical maneuvers. Models 3100 and 5100 feature our high-strength,injection-molded plastic handle. Our Model 4100 utilizes a rubber-coated,steel handle. Both handles are designed with maximum ergonomic comfortin mind. The handle and strap are positioned at a 45° angle on the Model4100 to reduce user fatigue during extended tactical encounters. The Model5100 uses a two handle configuration for use in crowd containment situationsor to subdue belligerent inmates at correctional facilities.SHERIFFCORRECTIONS• Custom decals available on orders greaterthan 100.• Weight: 5.7 lbs. (2.6Kg) fully assembled• Dimensions: Height: 36”Width: 20” (91.4 cm x 50.8 cm)CAT. NO. DESCrIPTION Price3100X rIOT BODY SHIELD (specify decal) $62.954100X rIOT BODY SHIELD (specify decal) $62.955100X CONTAINMENT SHIELD (specify decal) $64.95RSH1 rEPLACEMENT handle (model 4100 only) $7.85RSH2 rEPLACEMENT HANDLE (Models 3100 and 5100 only) $7.85RSAS1 VELCro® ARM STRAP $8.50RsFP1 FOrearm PAD $4.25CB3 waterproof nylon CARRYING BAG (See page 17 for details) $37.50RBH1 RIOT BATON HOLDER, set of 2 (not pictured) $14.5014 Premier Crown ® • www.premiercrown.com

BODY BODY SHIELDS SHIELDSspecifications:• Tough, thermo-formed, clear polycarbonateshield is .150” thick (3.8 mm)• Polymer alloy handles with steel inserts• .75” (19 mm) Shock-absorbing foam padprotects user’s hands• 6” Wide (15 .2 cm) decal with white letterson black background allows easy identificationof officers• Dimensions: height 48”, width 24” (123cm x 61 cm)• Visibility up to 88% light transmission• Five standard decals available: CORRECTIONS,POLICE, POLICIA, SHERIFF, plain blackPOLICEPOLICIASHERIFFCORRECTIONS6100P7100P6100PA7100PA6100S7100S6100C7100C6100PL7100PL• Custom decals available on orders greaterthan 100• Weight (6100): 8.5 lbs. fully assembled(3.9 Kg)• Weight (7100): 9.25 lbs. fully assembled(4.2 Kg)Full Length Body ShieldsThe 6100 and 7100 hand-held body shields are 48” H x 24” W providingfull knee to head coverage. Shields feature superior optical quality andworkmanship.The 6100 features an ergonomic handle which allows two-handed use forextreme circumstances. The handle and break away strap are dielectric toprevent electrical pass through and can be reversed for left or right hand use.The wide nylon arm strap is easily adjustable while in use.The 7100 features a unique design that allows two people to grip with bothhands on each handle when extra holding power is needed. Dielectric handlesprevent electrical pass through.CAT. NO. DESCrIPTION Price6100X rIOT SHIELD (specify decal) $134.957100X CONTAINMENT SHIELD (specify decal) $134.95Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 15

GEARTACTICAL GEARTACTICALGear StorageCB1Nylon drawstring carrying bag protects helmets or other gear when not in use.Fits models 906, 900LT, 700, 600 and 6006.CB1CB2Same design and features as CB1 only larger to accommodate models JCR100,JCR200 and FXR2000LT.CB3Riot shield carrying bag is constructed of sturdy 410 Denier nylon to protectall 36” x 20” riot shields when not in use.CB5Rugged 12” x 20” nylon duffel is big enough for a helmet and other tacticalitems. Also features Velcro ® loops for baton.CB6Large 1000 Denier Cordura ® bag can carry all you need. 30” x 16” x 14” ofstorage capacity. Outer pocket. Shoulder strap included.CB2CAT. NO. DESCrIPTION PriceCB1 gear bag $21.00CB2 gear bag $24.50CB3 riot shield bag $37.50CB5 DUFFEL bag $14.95CB6 LArge gear bag $39.95CB3pasgt Riot Conversionriot face shield detachment kit with clearface shieldThis revolutionary face shield system has many distinctive features: a top rubberseal prevents seepage of liquids onto the wearer’s face; a pivot-and-lockmechanism mounts to either side of the face shield allowing left- or right-handoperation; the shield locks up and down—and stays in place regardless of rigorsof situations.Features:CB5CB6• Designed for PASGT military helmets• Shield made of Lexan ®• Meets NIJ0104.02• Shield mounts quickly without tools• Fits standard military-style and most police helmets• Detachment kits include installation instructions• Meets MIL-V-43511C fragmentation requirements• Extra clearance for use over gas mask• NSN 4240=01-430-1983• Detachment kits come with face shield, helmetconverter band and screw, spacer and bracket kitCAT. NO. DESCrIPTION PriceDK5H kit with .150" clear face shield $58.43DK5X kit with .250" clear face shield $86.9316 Premier Crown ® • www.premiercrown.com

Non-VehicularDUTYGENERAL DUTYGENERALPolycarbonate shell isshatter-resistant anddent-resistantCross-section of a PREMIER CROWN ®GENERAL duty helmet(Non-vehicular)General features1/4” ThickTop PadExpandedpolystyrenefoam linerGeneral Dutyhelmets are paintedon the inside ofthe shell to preventscratching orchippingSizing strip ofpolyurethanefoam adjusts tohead sizeComfort fit “YD”harness oflaminated vinyl,and tubular nylonDouble D-ringfastenerLiner covering madeof sweat-wickingantimicrobial antifungalmaterialThe U.S. Department of Transportation Standard, D.O.T. FMVSS218, establishes performance requirements for helmets designed for use by motorcyclists.PREMIER CROWN ® General Duty Helmets are not designed or intended for vehicular use.general duty helmetsPREMIER CROWN ® General Duty Helmets are worn assleek uniform and dress helmets by leading law enforcementand security forces around the world. As uniform helmets, theyare easily recognized by the public.The excellent custom appearance and comfort of eachPREMIER CROWN ® General Duty Helmet is assuredby meeting three main goals: Extreme attention to detail,selection of the most up-to-date materials and a commitmentto quality control.PREMIER CROWN ® assures the high-quality appearanceof our general duty helmets by providing finely detailed colorlines, attractive rank bands and special emblems.The shells are made from clear, tough polycarbonate. Theycome with black, molded vinyl and steel edging. The paintis formulated to PREMIER CROWN ® ’s specifications tooptimize its longevity and color retention. On the inside, ourgeneral duty helmets feature our sweat-wicking, anti-fungalhelmet liner to keep you cool and clean. Our hand-crafted,comfort-fit YD harness keeps the helmet securely in place.PREMIER CROWN ® general duty helmets are not designedor intended for vehicular use**.Our helmets are available in all standard police colors.Choose from one of ten solid colors or 90 different two-colorcombinations. See page 26 for ordering information.**Premier Crown general duty helmets do not meet the specifications of the U.S. D.O.T. FMVSS218 for motor patrol helmets.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 17

DUTYGENERAL DUTY Non-VehicularGENERAL600 Features:New!• Polycarbonate shell is colored on the inside toprevent damage to the finish• Expanded polystyrene liner with padded innerliner• Comfort fit “YD” harness permits air circulationand unrestricted hearing• Easily converted for light or emergency tacticalduty by installing optional face shield conversionkit**• Integrated molded visor with choice of silver, goldor no rank band• Weight: 2.36 lbs. (1.06 kg)• Optional face shield conversion kit includes aface shield, neck protector, nylon helmet coverand chin cup. See page 17.Model 600 Sizes:Universal: 6 1 / 2”- 7 5 / 8” (16.5cm -19.4cm)XL: 7 3 / 4” - 8 1 / 8” (19.7cm - 20.6cm)Jumbo: 8 1 / 4” - 8 1 / 2” (20.9cm - 21.6cm)Meets ASTM F1163-00 Equestrian helmet for positionalstability and impact attenuation only.The U.S. Department of Transportation Standard,D.O.T. FMVSS218, establishes performance requirementsfor helmets designed for use by motorcyclists.PREMIER CROWN ® Model 600 is not intended forvehicular use.**The model 600 with optional face shield conversionkit (RCK600) does not meet NIJ standards forriot helmets. For riot control, use Premier Crown ® riothelmets.See page 22 for ordering information andcolor selection.600 General Duty HelmetThe PREMIER CROWN ® Model 600 is one of the company’s most popular uniform helmets. Its distinguished appearance andcomfort complement any dress uniform; and its durability provides protection in a variety of light-duty situations.CAT. NO. HELMET Price600 gENERAL DUTY HELMET $123.0018 Premier Crown ® • www.premiercrown.com

ACCESSORIESACCESSORIESbhedfagcia. chin padSweat absorbent chin pad is 1 / 4 ” thickfor added comfort.Cat. No. CP1 ....................... $6.96b. Interior Liner KITAllows helmet to be used by differentofficers. Strips are provided for headsize adjustment.Cat. No. ILK1 .................... $21.50c. helmet coverUse to cover and protect helmet duringaltercations.Cat. No. HC1 ....................... $9.75d. one-piece earmuffOne-piece, full-fur earmuff covers earsand back of neck. Hook and loop-, andsnap-attached.Cat. No. EM1 ..................... $20.50e. two-piece earmuffTwo-piece fur earmuff made to fit YDharness-type retention system. Hookand loop-attached.Cat. No. EM2 ..................... $20.50f. face shieldTactical face shield kit.Cat. No. tFSk2 .................. $38.95g. chin cupProtects chin.Cat. No. CC1 ....................... $4.85h. neck protectorProtects neck. Snaps on.Cat. No. np1 ..................... $17.75i. carrying bagPadded nylon carry bag with cordlockclosure.Cat. No. CB1 ..................... $21.00j. face shieldconversion kitIncludes C, F, G, and H.Cat. No. RCK600................ $56.50K. Quick release BuckleOur quick releasebuckleattaches metalto metal for increasedretentionstrength to meet the NIJ standardfor retention. The metal latches areencased in plastic for maximum comfortand ease of use. Can be installed onexisting helmets with D-rings.Cat. No. QRB2 ..................... $7.85Model 600 shown in gold/black.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 19

DUTYGENERAL DUTY Non-VehicularGENERAL700 Features:• Polycarbonate shell is colored on inside to preventdamage to the finish• Expanded polystyrene liner with padded inner liner• Comfort fit “YD” harness permits air circulation andunrestricted hearing• Easily converted for light or emergency tacticalduty by installing optional face shield conversionkit**• Detachable plastic visor with choice of silver, goldor no rank band• Choice of visor colors: black, blue or smoke• Weight: 2.42 lbs. (1.09 kg)• Optional face shield conversion kit includes a faceshield, neck protector, nylon helmet cover and chincup. See page 19.Model 700 Sizes:Universal: 6-1/2” - 7-5/8”(16.5cm - 19.4cm)XL: 7-3/4” - 8-1/8” (19.7cm - 20.6cm)Jumbo: 8-1/4” - 8-1/2”(20.9cm - 21.6cm)Meets ASTM F1163-00 Equestrian helmet for positionalstability and impact attenuation only.The U.S. Department of Transportation Standard, D.O.T.FMVSS218, establishes performance requirements forhelmets designed for use by motorcyclists. PREMIERCROWN ® Model 700 is not intended for vehicular use.**The Model 700 with the optional face shield conversionkit RCK700 does not meet NIJ 0104.02 standardsfor riot helmets. For riot control, use Premier Crownriot helmets.See page 22 for ordering information andcolor selection.700 General Duty HelmetThe PREMIER CROWN ® Model 700 is the most versatile helmet for non-vehicular general duty use.The helmet’s lightweight and attractive appearance make it ideal for general uniform wear. Available in a variety of color combinations,the model 700 can be easily matched to any style dress uniform.CAT. NO. HELMET Price700 gENERAL DUTY HELMET $123.0020 Premier Crown ® • www.premiercrown.com

ACCESSORIESACCESSORIESbhdegafclia. chin padSweat absorbent chin pad is 1 / 4 ” thickfor added comfort.Cat. No. CP1........................ $6.96b. Interior Liner KITAllows helmet to be used by differentofficers. Strips are provided for headsize adjustment.Cat. No. ILK1 .................... $21.50c. helmet coverUse to cover and protect helmet duringaltercations.Cat. No. HC1 ....................... $9.75d. one-piece earmuffOne-piece, full-fur earmuff covers earsand back of neck. Hook and loop-, andsnap-attached.Cat. No. EM1 ..................... $20.50e. two-piece earmuffTwo-piece fur earmuff made to fit YDharness-type retention system. Hookand loop-attached.Cat. No. EM2 ..................... $20.50f. face shieldTactical face shield kit with snaps.Cat. No. tFSk1................... $33.75g. chin cupProtects chin.Cat. No. CC1 ....................... $4.85h. neck protectorProtects neck. Snaps on.Cat. No. np1 ..................... $17.75i. carrying bagPadded nylon carry bag with cordlockclosure.Cat. No. CB1 ..................... $21.00j. face shieldconversion kitIncludes C, F, G, and H.Cat. No. rck700 ............... $56.50K. Quick releaseBuckleOur quick releasebuckleattaches metalto metal for increasedretentionstrength to meet the NIJ standardfor retention. The metal latches areencased in plastic for maximum comfortand ease of use. Can be installed onexisting helmets with D-rings.Cat. No. QRB2 ..................... $7.85L. visorsAvailable in the following colors withsilver, gold or no rank band.BLACK* (CAT. NO. V1BL) .... $11.00blue (CAT. NO. V1BU) ....... $11.00SMOKE* (CAT. NO. V1S) ..... $11.00Please specify color and rank band when ordering.*Smoke is transparent and black is opaque.Model 700 shown in dark blue/black.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 21

DUTYGENERAL DUTY Non-VehicularGENERAL6006 Features:• Polycarbonate shell is colored inside to preventdamage to the finish• Expanded polystyrene liner with padded innerlining• “YD” harness permits air circulation and unrestrictedhearing• Easily converted for light or emergency tacticalduty by installing optional tactical conversionkit**• Integrated molded visor with choice of silver, goldor no rank band• Detachable face shield, .150” thick (3.8mm)• Weight: 3 lbs. (1.35 kg)• Optional conversion kit includes a neck protector,nylon helmet cover and chin cup. See page 21.Model 6006 Sizes:Universal: 6-1/2” - 7-5/8” (16.5cm -19.4cm)XL: 7-3/4” - 8-1/8” (19.7cm - 20.6cm)Jumbo: 8-1/4” - 8-1/2” (20.9cm - 21.6cm)See page 22 for ordering information andcolor selection.Meets ASTM F1163-00 Equestrian helmet for positionalstability and impact attenuation only.The U.S. Department of Transportation Standard,D.O.T. FMVSS218, establishes performance requirementsfor helmets designed for use by motorcyclists.PREMIER CROWN ® Model 6006 is not intended forvehicular use.**The Model 6006 with the optional tactical conversionkit, RCK6006 does not meet NIJ 0104.02 standardsfor riot helmets. For riot control, use Premier CrownRiot Helmets.6006 General Duty HelmetAll of the standard features found on the model 600 are found on the 6006, with the addition of our clear polycarbonate faceshield.It is the ideal uniform helmet for general duty use when face protection is desired. As with models 600 and 700, the 6006 isavailable in a wide variety of color combinations to match dress uniforms.CAT. NO. HELMET Price6006 gENERAL DUTY HELMET $141.0022 Premier Crown ® • www.premiercrown.com

ACCESSORIESACCESSORIESahdfebgcia. Interior Liner kitAllows helmet to be used by differentofficers. Strips are provided for headsize adjustment.Cat. No. ILK1 .................... $21.50b. chin padSweat absorbent chin pad is 1 / 4 ” thickfor added comfort.Cat. No. CP1 ....................... $6.96c. helmet coverUse to cover and protect helmet duringaltercations.Cat. No. HC1 ....................... $9.75d. one-piece earmuffOne-piece, full-fur earmuff covers earsand back of neck. Hook and loop-, andsnap-attached.Cat. No. EM1 ..................... $20.50e. two-piece earmuffTwo-piece fur earmuff made to fit YDharness-type retention system. Hookand loop-attached.Cat. No. EM2 ..................... $20.50f. face shieldShield is 0.15” thick with a liquid seal.Cat. No. FS3....................... $21.00g. chin cupProtects chin.Cat. No. CC1 ....................... $4.85h. neck protectorProtects neck. Snaps on.Cat. No. np1 ..................... $17.75i. carrying bagPadded nylon carry bag with cordlockclosure.Cat. No. CB1 ..................... $21.00j. tactical conversionkitIncludes C, G and H.Cat. No. rck6006 ............. $39.75K. Quick releaseBuckleOur quick releasebuckleattaches metalto metal for increasedretention strength to meetthe NIJ standard for retention. Metallatches are encased in plastic formaximum comfort and ease of use.Can be installed on existing helmetswith D-rings.Cat. No. QRB2 ..................... $7.85Model 6006 shown in tan/brown.Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 23

INFOORDERING INFOORDERING1. Choose the helmet style. Write the first number of the modelnumber here:2. Choose the color/s. Choose a color for the top and bottomof the helmet. For example:Light BlueH-High TrimL-Low TrimModel 700 is available in the following styles:Midnight BlueA. Write the number of the helmet’s top color here:B. Write the number of the helmet’s bottom color here:0-tan1-Brown2-Gold3-Green4-Silver5-Black6-White1. HelmetStyleH-High TrimWrite the letter, H or L, for the trim style here:2A. Top Color 2B. BottomColorL-Low Trim5. Choose a rank band.Choose silver (S), gold (G) or no rank band (N). Write the letterfor the rank band here:6. Complete order number. Write the numbers and letters forthe chosen selections in the boxes below.3. For model6006—entera 6 here,otherwiseleave blank4. Trim Style 5. RankBandChoose size. All helmets are shipped as universal, unlessrequested otherwise. Helmets are available in the followingsizes:inchescmUniversal 6 1 / 2 ” to 7 5 / 8 ” 16.5-19.4Extra Large 7 5 / 8 ” to 8” 19.4-20.32Jumbo 8” to 8 3 / 4 ” 20.32-22.23Choose a decal. PREMIER CROWN ® offers four standarddecals available in silver or gold. Specialty decals may beordered at an additional charge.7-Light Blue8-Dark Blue9-Midnight BlueSmall PoliceSmall Sheriff3. Model 6006 only. If you’re ordering a Model 6006, writethe number “6” here:4. Choose the trim style. Models 600 and 6006 are availablein the following styles:Large Police24Premier Crown ® • www.premiercrown.comLarge Sheriff

BIO-SHIELD BIO-SHIELD® ®Bio-Shield®DecontaminationSprayUse Bio-Shield ® Decontamination Sprayfor recovery and protection from accidentaldischarge, gas blowback and assaultfrom OC Pepper and CN Tear Gas Sprays.Bio-Shield ® is a non-toxic decontaminantthat uses natural herbal ingredients toneutralize the effects of OC Pepper, CS,CN and other tear gas agents almostimmediately. Its special formula breaksdown the molecular structure of theseman-made chemicals to quickly restorebreathing, eyesight and physical orientation.Available in 4-oz. and 16-oz. pumpspray bottles.CAT. NO. DESCription PriceBSP4 4 oz. pump spray $9.95bSP16 16 oz. pump spray $19.95BioShield® Towelettesfor relief from pepper spray and tear gasBioShield ® Towelettes contain the same natural ingredients as our BioShield ® spray forneutralizing the effects of pepper spray (OC), CN and CS gases. It also contains an antibacterialagent for extra protection. BioShield ® towelettes are individually sealed in easy-to-openpouches that are conveniently designed to fit in one’s pocket. Towelettes unfold to a large8” x 11” size so fewer towelettes are needed to decontaminate from blowback, accidentaldischarge and equipment cleanup. The BioShield ® Towelettes are easy-to-use — just openand blot (do not wipe or rub) the affected areas of the face and body.IMPORTANT NOTE: Unlike BioShield ® Spray, towelettes are not for use directly in the eyesdue to the antibacterial ingredient.cat. no. Description PriceBST100 BioShield® Towelettes/100 $99.95BST50 BioShield® Towelettes/50 $49.95BioShield® Riot Response KitThe BioShield ® Riot Response Kit is designed to assist in the recovery from Pepper Sprayand Tear Gas Exposure. It contains a pack of five BioShield ® Decontamination Towelettes,a four-ounce bottle of BioShield ® Spray, a pair of gloves and a disposable face mask forresponder protection inside a first-aid style plastic carrying case.cat. no. Description PriceBSRK100 rIOT Response Kit $25.00Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 25

MIRRORSINSPECTION MIRRORSINSPECTIONPL2001 mini inspector• Foam insulation grip for maneuverability and comfort• Easy to disassemble for storing and for transporting to any location• A two-D cell flashlight illuminates dark areas• 5” Convex, wide-angle mirror for searching hard-to-see areas• Optional plastic carrying case is available for added convenience• Weight: less than 3 lbs. Length: 3 1 / 2 feetCAT. NO. DESCription PricePl2001 THE MINI INSPECTOR $74.95PL2002 PLASTIC CARRYING CASE $69.95PL3000PL3000 indoor/outdoor inspection mirror• 12” Round convex mirror• Adjustable swivel for infinite adjustment• Rubber rim protects mirror during use• Tripod ballbearing caster wheels allow a full range of motion with effortless maneuvering• Light-weight with 51-inch handle• 3 1 / 2” ground clearance• Comes with flashlight, batteries and mounting bracket• Excellent for use indoors or outdoorsCAT. NO. DESCription Pricepl3000 INDOOR/OUTDOOR MIRROR $82.95PL4000PL4000 heavy-duty inspection mirror• 12” Round convex mirror• Adjustable swivel for infinite adjustment• Handle adjusts from 30” to 50”• Rubber rim protects mirror during use• Wheels provide effortless maneuvering• Comes with flashlight, batteries and mounting bracket• Heavy-duty construction is excellent for use outdoorsCAT. NO. DESCription Pricepl4000 HEAVY-DUTY MIRROR $116.95PL5000 light-weight extendable inspection mirror• 8 1 / 2” Round convex mirror, fully adjustable• Tripod ballbearing caster wheels allow a full range of motion with effortless maneuvering• Rubber rim protects mirror during use• Light-weight with handle extension from 3’ to 6’• 3 1 / 2” ground clearanceCAT. NO. DESCription Pricepl5000 EXTENDABLE MIRROR $49.95PL500026 Premier Crown ® • www.premiercrown.com

GUNPOWDER TEST GUNPOWDER TEST KITS KITSEach sealed Test Kitcontains:(10) Crushable Ampoules(10) Gunpowder Particle CollectionLifters(1) Straight handle magnifierhow it works:Simply press the special collection lifteragainst the back and palm surfaces ofboth the suspect’s hands.BLUEVIEW GUNPOWDER PARTICLE TEST KITSThe BlueView Gunpowder Particle Test Kit is a fast, reliable field test for detection oftrace nitrates found in gunpowder. When a weapon is fired gunpowder is blown backin the direction of the shooter and trace amounts of these residues are deposited on theshooter’s firing hand. Detection of these trace residues can give valuable informationregarding whether or not a particular person has recently fired a weapon.Sirchie ® has developed this presumptive field test kit in a simple-to-use pouch formatthat can be deployed without any specialized training or equipment and results appearin seconds. This new format will allow for presumptive on-the-spot testing at crimescenes or anywhere a suspect may be apprehended.CAT. NO. DESCription Pricebv100 BLUEVIEW GUNPOWDER PARTICLE TEST KIT/BOX OF 10 TESTS $99.50Place the included ampoule in thecenter of the lifter and return to thepouch. Fold over the top of the pouch,replace the clip and crush the ampoule.Shake well.If gunpowder particles are present, bluespecks and/or smears will appear within3 to 6 minutes.riff100 GUNPOWDER and explosive PARTICLECOLLECTION POUCHThe RIFF100 Gunpowder Particle Collection Pouch is a fast, reliable field test fordetection of trace nitrates found in gunpowder. Developed to the specifications of theU.S. Special Forces for use in the field, this test utilizes a larger lifter for coverage of alarger area consistent with the use of certain assault weapons.CAT. NO. DESCription PriceRIFF100 gUNPOWDER PARTICLE test pouch/each $10.00Phone: 1-800-356-7311 • 919-554-0337 • Fax: 1-800-899-8181 27

PREMIER CROWN ®100B Hunter Place • Youngsville, NC 27596 U.S.A.Phone: (919) 554-0337, (800) 356-7311 • Fax: (800) 899-8181Email: premiercrown@mindspring.com • Website: www.premiercrown.com