lift brochures.pdf - aesco

www.challengerlifts.comVersymmetric ® 2-Post Lifts(Asymmetric and Symmetric Lifting)• Double your service capabilities. Our heavy-duty arms arespecially engineered to lift vehicles both “asymmetrically”and “symmetrically” in the same bay to increase servicingflexibility and revenue potential.• Several adjustable (width and/or height) features makethis lift the “perfect fit” for your service bay.• Our overhead cable equalization system and small baseplate provides a clear floor environment so tools can bemoved easier and minimizes obstructions.• Technicians can save valuable time by disengaging bothcolumn locks at the same time with our single-pointlock release system.• User friendly arm restraints automatically disengage whenlift is fully lowered for easy positioning of arms and securelyengage when lift is raised.optional accessories:Part#: 10300Part#: 10303Part Number Description10300 Two luxury car adapters.10303 Two 6" slip-on extension pads10304 Two 10" slip-on extension pads10305Four 6" slip-on extension padswith organizer kit10306 Organizer kit10264Air/electric workstation withfilter/lubricator/regulator10201Air/electric work station withoutfilter/lubricator/regulator16621 Two 5" Flip-up truck adaptersPart#: 10304Part#: 10264Part#: 16621Model #: CL10Asymmetric applicationTMModel #: CL10Symmetric ApplicationModel Number CL9 CL9-1 CL9-2 CL10 CL10-2 CL10-3Lifting Capacity 9,000 lbs. 9,000 lbs. 9,000 lbs. 10,000 lbs. 10,000 lbs. 10,000 lbs.Rise Height* 74 5 /8" 74 5 /8"Adjustable Column Height 11' 8" or 11' 2" 12' 8" or 12' 2" 13' 8" or 13' 2" 11' 8" 13' 8" 14' 8"Cylinder Overall (Full Stroke) 11' 11" 11' 11"Adjustable Width Overall 11' 2" / 10' 8" / 10' 2" 11' 11" / 11' 6 1 /2"Drive-Thru Clearance** 89 3 /8" 105" / 100 1 /2"Floor to Overhead Switch** 11' 2 3 /8" 12' 2 3 /8" 13' 2 3 /8" 11' 2½" 13' 2½" 14' 2½"Front Arm Reach (Min./Max.) Min. 27" / Max. 41" Min. 27" / Max. 41"Rear Arm Reach (Min./Max.) Min. 38 1 /4" / Max. 59" Min. 42" / Max. 59"Screw Pad Height Adj. 4 1 /8" - 6 5 /8" Adj. 4 1 /8" - 6 5 /8"Inside Columns** 109" 114 1 /2" / 110"Motor 2HP 2HPVoltage (Single Phase Std.)*** 208v-230v 208v-230vSpeed of Rise 48 Sec. 48 Sec.Ceiling Height Required 12' 12' 9" 13' 9" 11' 11" 13' 9" 14' 9"ALL MODELS INCLUDE A SINGLE-POINT “MECHANICAL” LOCK RELEASE SYSTEM.-ADJUSTABLE "RUBBER PAD" ARMS STANDARD, 3-POSITION FLIP-UP FRAME CONTACT ARMS AREAVAILABLE BY ADDING "SP" AFTER PART NUMBER AT TIME OF ORDER (Example CL9SP).* Rise height is measured with adjustable screw pads in highest position.** Specifications are listed with lift at MAXIMUM width and/or height settings.*** Optional 3 phase electrical also available, please specify at time of order.Standard lift colors are Red and Blue

www.challengerlifts.comHeavy Duty 2-Post Lifts(Symmetric Lifting)standard accessories:2 high extensions4 medium extensions4 standard adaptersOur single push buttonpower unit raises liftand a release valvehandle lowers it.Challenger’s arm restraintsautomatically disengagewhen lift is fully loweredfor easy positioning ofarms and securely engagewhen lift is raised.Technicians candisengage both columnsat the same time withour single-point airactuated lock release.Turn your lift into aworkstation with ourOptional Air-ElectricService Station.(Part#: 10264)Our single pieceadapter organizerprevents adaptersfrom being misplaced.Model Number 12000 12001 12002 15000 15002 18000 18002Lifting Capacity 12,000 lbs. 12,000 lbs. 12,000 lbs. 15,000 lbs. 15,000 lbs. 18,000 lbs. 18,000 lbs.Rise Height* 84 3 /4" 85 1 /2" 85 1 /2"Height Overall 13' 8" 14' 8" 15' 8" 14' 6" 16' 6" 14' 6" 16' 6"Width Overall 11' 10" 12' 10 3 /4" 12' 10 3 /4"Drive-Thru Clearance 104 1 /2" 106 3 /4" 106 3 /4"Floor to Overhead Switch 13' 1" 14' 1" 15' 1" 13' 11" 15' 11" 13' 11" 15' 11"Arm Reach (Min.) 37" 38 1 /2" 38 1 /2"Arm Reach (Max.) 54" 62" 62"Screw Pad Height 5" - 6 3 /4" 6 1 /4" - 8 1 /2"Medium Extension 8" - 9 3 /4" 10 1 /4" - 12 1 /2"High Extension 11" - 12 3 /4" 14 1 /4" - 16 1 /2"Inside Columns 114 1 /2" 120" 120"Air Supply Required 85-115 psi 85-115 psi 85-115 psiMotor 2HP 2HP 2HPVoltage (Single Phase Std.)** 208v-230v 208v-230v 208v-230vSpeed of Rise 60 Sec. 80 Sec. 80 Sec.Ceiling Height Required 13' 9" 14' 9" 15' 9" 14' 7" 16' 7" 14' 7" 16' 7"* Rise height is measured with adjustable screw pads in highest position.** Optional 3 phase electrical also available, please specify at time of order.Standard lift colors are Red and BlueModel #: 18000Whether you want to expand your fleet servicecapabilities, avoid downtimes or just increaseyour bottom line, Challenger Lift’s 12,000,15,000, and 18,000 lbs. heavy-duty 2-postlifts are the solutions for your servicing needs.Not only does our Heavy-Duty Series lift a lot,it’s a lot of lift. With features that you wouldexpect to pay more for, like padded overheadcut-off bar, adapter accessories, etc. In fact noother lift company gives you more.Lit#: AN1B-1_9/05

www.challengerlifts.comStandardHeavy-DutyModel Numbers CS1020W* CS1220 CS1520Lifting Capacity 10000 lbs. 12000 lbs. 15000 lbs.Rise Height** 78" 81 1 /4" 84 3 /4"Stroke 68" 68" 68"Width Overall 97" 99" 71 1 /2"Drive-Thru Clearance 87" 88" NAReach (Arm Minimum) 26 1 /2" 32" 26 1 /4"Reach (Arm Maximum) 39" 49 1 /4" 43"Min. Adapter Height 4" NALow Step Height 6 1 /2" NAHigh Step Height 10" NAAdapter Height NA Adj. 5" - 7 1 /4" Adj. 6 1 /2" - 8 3 /4"Adapter Height (w/Med. Ext.) NA Adj. 8" - 10 1 /4" Adj. 10 1 /2" - 12 3 /4"Adapter Height (w/High. Ext.) NA Adj. 11" - 13 1 /4" Adj. 14 1 /2" - 16 3 /4"Capacity (Per Arm) 2500 lbs. 3000 lbs. 3750 lbs.Motor 2HP 2HP 2HPVoltage (Single Phase Std.)*** 208v-230v 208v-230v 208v-230vSpeed of Rise 48 Seconds 65 Seconds 80 SecondsAir Required 75 - 125 psi 75 - 125 psi 75 - 125 psiRecommended 79" plus height 82" plus height 85" plus heightCeiling Height of tallest vehicle of tallest vehicle of tallest vehicle* Standard models includes an adjustable screw-type rubber pad or 3-position flip-up superstructure.Please specify superstructure preference at time of order.** Rise height is measured with superstructure in highest position.***Optional 3 phase electrical also available, please specify at time of order.adjustable screw pads:3 position fl ip-ups:Reach ranging betweenhighest and lowestscrew positionsThree height positions:low, medium, and high.optional accessories:Part#: 10300Model #: CS1020WPart#: 10303Part Number Description10300 Two luxury car adapters.10303 Two 6" slip-on extension pads10304 Two 10" slip-on extension pads10305 Four 6" slip-on extension padswith organizer kit16621 Two 5" Flip-up truck adaptersPart#: 10304Part#: 16621Model #: DTLS1Challenger Lifts’ DeTEK - Liquid DetectionSystem informs you should liquid everaccumulate in the bottom of your ingroundcassette tub.• Detects liquid as low as 1 3 /4"• Red detection light system mountssecurely to power unit for easy visibility• Retrofits with other cassette lift models,including competitive brandModel #: EVAC1Should liquid ever accumulate in thebottom of your cassette lift, Challenger Lifts’EnviroVAC – Evacuation System will helpprotect your investment and minimizeexpensive service call by giving you theability to easily remove the unwanted liquidimmediately into a 16 gallon container.• A powerful pump allows quickliquid removal• Container easily rolls to a quick-connectevacuation hose next to power unit• Container incorporates a drain valve toconveniently dispose evacuated liquid• Retrofits with other cassette lift models,including competitive brands

www.challengerlifts.comFour Post liftsModel #: 40SFXNarrow Standard Extended XL Extended Open Front Open FrontBay Length Length Length Extended XL ExtendedModel Number 40NFX 40SFX 40EFX 40XFX 40EFO 40XFOLifting Capacity 12,000 lbs. 12,000 lbs. 12,000 lbs. 12,000 lbs. 12,000 lbs. 12,000 lbs.Max. Wheelbase* 157 1 /2" 157 1 /2" 182 1 /2" 210" 182½" 210"Rise Height 79" 79" 79" 79" 79" 79"Length Overall 18' 3" 18' 3" 20' 4" 22' 8" 20' 9" 23'Width Overall 10' 1" 10' 11" 10' 11" 10' 11" 11' 10" 11' 10"Inside Columns 106" 116" 116" 116" 120" front - 116" rearHeight of Columns 90½" 90½" 90½" 90½" 99½" front - 90½" rearWidth of Runways 20" 20" 20" 20" 20" 20"Height of Runways 7" 7" 7" 7" 7" 7"Air Supply Required 85-115 psi 85-115 psi 85-115 psi 85-115 psi 85-115 psi 85-115 psiMotor 2HP 2HP 2HP 2HP 2HP 2HPVoltage (1 Phase Std.)** 208v-230v 208v-230v 208v-230v 208v-230v 208v-230v 208v-230vSpeed of Rise 70 Sec. 70 Sec. 70 Sec. 70 Sec. 70 Sec. 70 Sec.* Maximum wheelbase is based on a tire diameter of 30".** Optional 3 phase electrical also available.Standard lift colors are Red and Blue.optional accessories:Part Number Description10266 Drive through ramps24006C 6,000 lbs. rolling jack10267 32 gal. rolling drain pan40230(X)(E)(S) Internal air line kitBolt-on Alignment Kits40200-3D3D alignment compatiblew/o radius gauges3D alignment compatible40200-3DBK w/black “powder coat”radius gauges(10500HD)3D alignment compatible40200-3DSS w/stainless steelradius gauges(10500SS)Alignment Rack PackagesModel #: AR40XAOOpen-FrontClosed-FrontModel Number AR40EAO AR40XAO AR40EAX AR40XAXLifting Capacity 12,000 lbs. 12,000 lbs. 12,000 lbs. 12,000 lbs.Max. Wheelbase 182 1 /2" 210" 182 1 /2" 210"Max. 2 Wheel Align. 166 1 /2" 194" 166 1 /2" 194"4 Wheel Align. 88" - 158" 88" - 158"Rise Height 79" 79"Length Overall 20' 9" 23' 20' 4" 22' 8"Width Overall 11' 10" 10' 11"Inside Columns 120" front - 116" rear 116"Height of Columns 99 1 /2" front - 90 1 /2" rear 90 1 /2"Width of Runways 20" 20"Height of Runways 7" 7"Air Supply Required 85-115 psi 85-115 psiMotor 2HP 2HPVoltage (1 Phase Std.)** 208v-230v 208v-230vSpeed of Rise 70 Sec. 70 Sec.* Maximum wheelbase is based on a tire diameter of 30".** Optional 3 phase electrical also available.Standard lift colors are Red and Blue.standard accessories:15 3 /8" Max.3 3 /8" Min.Part#: 24006C50" Max.33" Min.43" Max.40" Min.Alignment Rack Packages IncludePart Number Description24006C Two 6,000 lbs. rolling jacks40230 Internal air-line kit10500SSTwo flush mounted stainless steelturning radius gaugesBuilt in rear slip plates and two multi-positionworksteps are also included with the purchase ofany Alignment Rack PackageLit#: AN1B-2_9/05

www.challengerlifts.comPortable Mid-Rise LiftModel Number 66000 66000ALifting Capacity 6,000 lbs. 6,000 lbs.Rise Height 48" 48"Length Overall 7' 6" 7' 6"Width Overall 3' 3 3 /8" 3' 3 3 /8"Min. Collapsed Height 3 3 /8" 3 3 /8"Pad Height (Min.) 5 1 /2" 5 1 /2Pad Height (Max.) 49 1 /2" 49 1 /2Model #: 66000standard accessories:4 rubber padadapters andheight extensionsincludedHydraulic Hose 12' 12'Lock Positions 4 4Electric Motor 1HP NAVoltage (Single Phase) 115v NAAir Supply Required NA 100 psiPneumatic Motor NA 2HPSpeed of Rise 45 Sec. 65 Sec.Standard lift colors are Red and Blue.Pit LiftModel #: 68000The 68000 pit lift ishydraulically equalizedallowing for an obstructionfree pit.Model Number 68000Lifting Capacity6,000 lbs.Rise Height 25"Lowered Minimum Height 5"Locking Bar Heights 24" / 19" / 14 1 /2"Width Overall (plus pit width) 37"Length Overall 85 3 /4"Spotting Blocks(4 included) 1½" x 4" x 6¼"Motor1HPVoltage (Single Phase Std.)115vSpeed of Rise40 Sec.Hoses provided by installer.Standard lift color is Blue only.standard accessories:4 spotting blocksPart #: 68005-1Short-Rise Pad LiftModel #: 67000Model Number 67000Lifting Capacity6,000 lbs.Rise Height 26"Lowered Minimum Height 4 1 /4"Locking Bar Heights 13 1 /2" / 18 1 /2" / 21 1 /2"Width Overall 72"Length Overall 90 1 /4"Rearward Movement 13"Motor1HPVoltage (Single Phase Std.)115vSpeed of Rise45 Sec.Standard lift colors are Red and Blue.optional accessories:Four 4 1 /8" spotter blockauxiliary adaptersPart #: 63100Low Ceiling 2-Post(Symmetric Lifting)Model #: 26000Model Number 26000Lifting Capacity9,000 lbs.Rise Height 78 1 /2"Column Height 10' 1"Width Overall 10' 10 1 /2"Drive-Thru Clearance 98"Arm Reach (Min.) 28 3 /4"Arm Reach (Max.) 44 1 /2"Screw Pad Height Adj. 6" - 8"Inside Columns 109"Motor2HPVoltage (Single Phase Std.) 208v-230vSpeed of Rise45 Sec.Reference Versymmetric page foroptional accessories.Standard lift colors are Red and Blue.

DUAL PENDANTCONTROLHandheld pendantcontrol tethered toboth columns.Activates the raiseand loweringfunctions of thepower unit.Single point mechanicallock release operatesfrom both sides of thelift.Allows the technician theability to raise and lowerthe lift from both sideswhile spotting the arms,when small adjustmentscan matter most!SimplyorderPart #CL9DPC orCL10DPCEach magnetic backed pendantcan be located on its’ columnanywhere above 18½.Installation friendly for New CL9 and CL10 Versymmetric ®2-Post Lift Models.At Challenger, We listen to what the “Customer Wants”

IDEAL FOR SERVICING:Tires & BrakesMufflersFront-EndsShocks & StrutsAlignmentTransmissionsFast LubesInspectionsand much more!Challenger Lift’s 12,000 lbs. four-post liftsare a great way to increase your serviceoffering and revenue potential.Our 40 Series have features that youwould expect to pay more for, like solidpiece column construction, automaticwheel stops, wheel curbs and anti-skidcoating on runways to minimize slipping, etc.With optional rollingjacks, bolt-onalignment kit, oil drain pan, etc., you’ll beable to accommodate just about anythingthat comes in for service.Call us at 800-648-5438, our nationalnetwork of authorized distributors andinstallers will be glad to show you how toraise your service to full capacity.We don’t just stand behind our products,we stand under them!TMwww.challengerlifts.comShown:Model 40EFX (12,000 lbs. capacity)with optional 24006C rolling jacks(6,000 lbs. lifting capacity each)

Open-Front / Closed-Front Alignment RacksTwo 6,000 lbs Sliding Jacks Included:3 1 /4" Min.12 7 /16" Max.33" Min.50" Max.40" Min.43" Max.When you get our Alignment System......You get the Complete Package!Both our “Open-Front” and “Closed-Front” AlignmentPackages include dual 6,000 lbs. sliding jacks (24006C) thatutilize an internal air line system, flush mount 45 o stainlesssteel radius gauges and a multi-position work-steps. Ourinternal airline kit saves you valuable time by using bothsliding jacks without changing air supply.ALIGNMENT PACKAGE ACCESSORIES ARE ALSOAVAILABLE INDIVIDUALLY.Please contact factory for details.Rubber pad adaptersprotect a vehicle’sdelicate undercoating.Filter/lubricator/regulatorincludedFor more information, contact your authorized Challenger Lift Distributor:12,000 lbs. Capacity* Maximum wheelbase is based on a tire diameter of 30".** Optional 3 phase electrical also available. Standard lift color are Red (as shown) and Blue.Also available in a “Open-Front” General Service 4-Post Lift configuration(Model # 40EFO and 40XFO).Other Features:SPECIFICATIONS AR40EAO AR40XAO AR40EAX AR40XAXMaximum Wheelbase* 182 1 /2" 210" 182 1 /2" 210"(4636mm) (5334mm) (4636mm) (5334mm)Max. 2 Wheel Alignment* 166 1 /2" 194" 166 1 /2" 194"(4229mm) (4927mm) (4229mm) (4927mm)4 Wheel Alignment 88" - 158" 88" - 158"(2235mm - 4013mm)(2235mm - 4013mm)A. Rise Height 79" 79" 79" 79"(2007mm) (2007mm) (2007mm) (2007mm)B. Length Overall 20' 9" 23' 20' 4" 22' 8"(6325mm) (7010mm) (6198mm) (6909mm)C. Width Overall 11' 10" 11' 10" 10' 11" 10' 11"(3607mm) (3607mm) (3327mm) (3327mm)D. Inside of Columns 120" front - 116" rear 116"(3048mm) - (2946mm)(2946mm)E. Between Columns 195" 222 1 /2" 195" 222 1 /2"(4953mm) (5652mm) (4953mm) (5652mm)F. Height of Columns 99 1 /2" front - 90 1 /2" rear 90 1 /2"(2527mm) - (2299mm)(2299mm)G. Width of Runways 20" 20" 20" 20"(508mm) (508mm) (508mm) (508mm)H. Height of Runways 7" 7" 7" 7"(178mm) (178mm) (178mm) (178mm)I. Width Between Runways 43" 43" 40" - 43"(1092mm) (1092mm) (1016mm - 1092)Lifting Capacity 12,000 lbs. 12,000 lbs. 12,000 lbs. 12,000 lbs.(5443 kg) (5443 kg) (5443 kg) (5443 kg)Air Supply Required 85-115 psi 85-115 psi 85-115 psi 85-115 psiMotor 2HP 2HP 2HP 2HPVoltage (Single Phase Std.)** 208v-230v 208v-230v 208v-230v 208v-230vSpeed of Rise 70 Sec. 70 Sec. 70 Sec. 70 Sec.Min. Recommended Bay Size 12' x 24' 12' x 26' 12' x 24' 12' x 26'Multi-Position Work StepFilter, Lubricator, Regulatoron each Sliding JackAir Operated Safety Lock SystemOPEN-FRONT* CLOSED-FRONT(3658x7315mm) (3658x7925mm) (3658x7315mm) (3658x7925mm)Optional Accessory:Turn your lift into aworkstation with ourcolumn mountedAir-ElectricService Station(#10310).The Automotive Lift Institute (ALI) certifiesthat the AR40 Series Alignment Racks describedherein comply with the applicable provisionsof the American National Standards ANSI/ALIALCTV-1998 and are Third Party Validated by theETL Testing Laboratory.Challenger Lifts, Inc. reserves the right to make changes without notice and without making changes retroactive.Unloading, installation and oil not included.Attractive Lease Programs Available.GSA CONTRACT # GS-O7F-8950D • CAGE CODE 0KD44SIN#'s 253-23, 253-23A, 253-38 • DUNS# 79-435-3680Lit# AR40 10/04©2004, Challenger Lifts, Inc.CHALLENGER LIFTS, INC.200 Cabel StreetLouisville, Kentucky 40206Phone Toll-Free: 800-648-5438502-625-0700Fax: 502-625-0711E-mail: sales@challengerlifts.comMajor Credit and Debit Cards Acceptedwww.challengerlifts.com

Whether you want to expand your fleetservice capabilities, avoid downtime or justincrease your bottom line, Challenger Lift’s12,000, 15,000 and 18,000 lbs. 2-post lifts arethe solutions for your servicing needs.Not only does our Heavy-Duty Series lift alot, it’s a lot of lift. With features that youwould expect to pay more for, like lowprofile arms, padded overhead cut-off bar,adapter accessories, etc. In fact, no otherlift company gives you more.Call us at 800-648-5438, our nationalnetwork of authorized distributors andinstallers will be glad to show you how toraise your service to full capacity.We don’t just stand behind our products,we stand under them!TMwww.challengerlifts.comShown: Model 1500215,000 lbs. lifting capacity

Standard Adapter Accessories:ScrewAdapterHeavy-Duty 2-Post Surface Lifts CapacityMediumExtensionSPECIFICATIONS 12000 12001 12002 15000 15002 18000 18002A. Rise Height* 84 3 /4" 84 3 /4" 84 3 /4" 85 1 /2" 85 1 /2" 85 1 /2" 85 1 /2"(2153mm) (2153mm) (2153mm) (2172mm) (2172mm) (2172mm) (2172mm)B. Height Overall 13' 8" 14' 8" 15' 8" 14' 6" 16' 6" 14' 6" 16' 6"(4166mm) (4470mm) (4775mm) (4420mm) (5030mm) (4420mm) (5030mm)C. Width Overall 11' 10" 11' 10" 11' 10" 12' 10 3 /4" 12' 10 3 /4" 12' 10 3 /4" 12' 10 3 /4"(3607mm) (3607mm) (3607mm) (3931mm) (3931mm) (3931mm) (3931mm)D. Drive-Thru Clearance 104 1 /2" 104 1 /2" 104 1 /2" 106 3 /4" 106 3 /4" 106 3 /4" 106 3 /4"(2654mm) (2654mm) (2654mm) (2712mm) (2712mm) (2712mm) (2712mm)E. Floor To Overhead Switch 13' 1" 14' 1" 15' 1" 13' 11" 15' 11" 13' 11" 15' 11"(3988mm) (4293mm) (4597mm) (4242mm) (4852mm) (4242mm) (4852mm)F. Arm Reach (Min.) 37" 37" 37" 38 1 /2" 38 1 /2" 38 1 /2" 38 1 /2"(940mm) (940mm) (940mm) (978mm) (978mm) (978mm) (978mm)G. Arm Reach (Max.) 54" 54" 54" 62" 62" 62" 62"(1372mm) (1372mm) (1372mm) (1575mm) (1575mm) (1575mm) (1575mm)H. Adapter Height Screw Pad Adj. 5" - 6 3 /4" Screw Pad Adj.6 1 /4" - 8 1 /2"(127mm - 171mm)(159mm - 216mm)I. Adapter Height (w/Med. Ext.)** Screw Pad Adj. 8" - 9 3 /4" Screw Pad Adj.10 1 /4" - 12 1 /2"(203mm - 248mm)(261mm - 318mm)J. Adapter Height (w/High Ext.)** Screw Pad Adj. 11" - 12 3 /4" Screw Pad Adj.14 1 /4" - 16 1 /2"(279mm - 324mm)(362mm - 420mm)K. Inside Columns 114 1 /2" 114 1 /2" 114 1 /2" 120" 120" 120" 120"(2908mm) (2908mm) (2908mm) (3048mm) (3048mm) (3048mm) (3048mm)Lifting Capacity 12,000 lbs. 12,000 lbs. 12,000 lbs. 15,000 lbs. 15,000 lbs. 18,000 lbs. 18,000 lbs.(5443 kg) (5443 kg) (5443 kg) (6804 kg) (6804 kg) (8165 kg) (8165 kg)Air Supply Required 85-115 psi 85-115 psi 85-115 psi 85-115 psi 85-115 psi 85-115 psi 85-115 psiMotor 2HP 2HP 2HP 2HP 2HP 2HP 2HPVoltage (Single Phase Std.)*** 208v-230v 208v-230v 208v-230v 208v-230v 208v-230v 208v-230v 208v-230vSpeed of Rise 60 Sec. 60 Sec. 60 Sec. 80 Sec. 80 Sec. 80 Sec. 80 Sec.Ceiling Height Required 13' 9" 14' 9" 15' 9" 14' 7" 16' 7" 14' 7" 16' 7"(4191mm) (4496mm) (4801mm) (4445mm) (5055mm) (4445mm) (5055mm)Maximum Load Per Arm 3,000 lbs. 3,000 lbs. 3,000 lbs. 3,750 lbs. 3,750 lbs. 4,500 lbs. 4,500 lbs.(1360 kg) (1360 kg) (1360 kg) (1700 kg) (1700 kg) (2041 kg) (2041 kg)HighExtensionTo accommodate a wide variety of vehicles, screw-up truckadapters and extensions are standard equipment. Standardequipment includes: four screw-up adapters, four mediumextensions and two high extensions. Screw-up adapters andextensions are conveniently located on column mountedadapter organizer.* Rise height is measured with screw pads in high position.** Medium and high auxiliary adapter extension are standard.*** Optional 3 phase electrical also available. Standard lift colors are Red and Blue.Features:For more information, contact your authorized Challenger Lift Distributor:Convenient single push buttonpower unit raises lift and arelease valve handle lowers it.User friendly arm restraints automaticallydisengage when lift is fully lowered for easypositioning of arms and securely engagewhen lift is raised.Technicians can disengage bothcolumns at the same time with oursingle-point air actuated lock release .Turn your lift into aworkstation with our OPTIONAL Air-Electric Service Station. (# 10264)Single piece adapter organizerprevents adapters from being misplaced .The Automotive Lift Institute (ALI) certifiesthat the Heavy-Duty 2-Post Lifts (12000, 15000,and 18000 Series) described herein complywith the applicable provisions of the AmericanNational Standards ANSI/ALI ALCTV-1998 andare Third Party Validated by the ETL TestingLaboratory.Challenger Lifts, Inc. reserves the right to make changes to specifications without notice and without making changes retroactive.Unloading, installation and oil not included.Attractive Lease Programs Available.GSA CONTRACT # GS-O7F-8950D • CAGE CODE 0KD44SIN#'s 253-23, 253-23A, 253-38 • DUNS# 79-435-3680Lit# HD2POST 5/03©2003, Challenger Lifts, Inc.CHALLENGER LIFTS, INC.200 Cabel StreetLouisville, Kentucky 40206Phone Toll-Free: 800-648-5438502-625-0700Fax: 502-625-0711E-mail: sales@challengerlifts.comMajor Credit and Debit Cards Accepted

44025series - 44030seriesHeavy Duty 4 -Post Surface Mounted LiftsChallenger Lifts, Inc.200 Cabel StreetLouisville, KY 40206toll free: 800.648.5438phone: 502.625.0700fax: 502.625.0711optional accessories:Part # DescriptionSAJ9S 9,000 lbs. rolling jack, adj. width 36˝-52˝SAJ12 12,000 lbs. rolling jack, adj. width 36˝-52˝SAJ15 15,000 lbs. rolling jack adj. width 36˝- 52˝10267Oil drain pan kit,adjustable width, 32 gallon10500HDHeavy duty powder coatedturning radius gauges44RK25Ramp kit, pivoting,36˝ long for drive thru operationRamp kit, pivoting,44RKE2572˝ long for drive thru operationFeatures:• Superior lifting system features tensile lift chain and sealedroller bearings for maximum reliability• Heavy-duty cylinder provides optimum lifting with minimum maintenance• Single point air actuated lock release• Internal track to accommodate rolling jacks or oil pan• Alignment models feature turning radius gauge cut outs forflush mounted 10500HD gaugesModel#: 44025Model Number 44025 44025-AR 44025E 44025E-AR 44025X 44025X-AR 44030 44030-AR 44030E 44030E-AR 44030X 44030X-ARLift Capacity 25,000 lbs 25,000 lbs 25,000 lbs 30,000 lbs. 30,000 lbs. 30,000 lbs.Maximum Wheelbase 230˝ 290˝ 350˝ 230˝ 290˝ 350˝Max. 2 Wheel Alignment N/A 220˝ N/A 280˝ N/A 340˝ N/A 220˝ N/A 280˝ N/A 340˝Rise 68˝ 68˝ 68˝ 68˝ 68˝ 68˝Overall Length 24´ 7½˝ 29´ 7½˝ 34´ 7½˝ 24´ 7½˝ 29´ 7½˝ 34´ 7½˝Overall Width 12´ 5½˝ 12´ 5½˝ 12´ 5½˝ 12´ 5½˝ 12´ 5½˝ 12´ 5½˝Overall Height 92˝ 92˝ 92˝ 92˝ 92˝ 92˝Inside of Columns 132½˝ 132½˝ 132½˝ 132½˝ 132½˝ 132½˝Between Columns 233¾˝ 293¾˝ 353¾˝ 233¾˝ 293¾˝ 353¾˝Width of Runways 24˝ 24˝ 24˝ 24˝ 24˝ 24˝Height of Runways 9˝ 9˝ 9˝ 9˝ 9˝ 9˝Width Between Runways 54˝ - 75˝ 54˝ - 75˝ 54˝ - 75˝ 54˝ - 75˝ 54˝ - 75˝ 54˝ - 75˝Motor 2HP 2HP 2HP 2HP 2HP 2HPVoltage - Single Phase 208-230v 208-230v 208-230v 208-230v 208-230v 208-230vSpeed of Rise 105 sec. 105 sec. 105 sec. 105 sec. 105 sec. 105 sec.Amps 30 30 30 30 30 30email: sales@challengerlifts.comChallenger Lifts, Inc. reserves the right to make changes without notice andLit# 44025-30-6/05without making changes retroactive. Unloading, installation and oil not included. www.challengerlifts.com ©2005, Challenger Lifts, Inc.

44018seriesHeavy Duty 4 Post Surface Mounted Liftsoptional accessories:Part#: SAJ-9• 9,000 lbs. lifting capacity• Extended lift height 11˝• Adjustable width 36˝- 52˝• SAJ-9A for alignment racksFeatures:• Superior lifting system features oversized lift chainand sealed roller bearings for maximum reliability• Mechanically operated lock is continuously engaged• Heavy-duty cylinder provides optimum lifting withminimum maintenance• Internal track to accommodate rolling jacks or oil pan• Alignment models feature double radius gauge cut outs,dual rear slip plates, internal airline kit, and single point airactuated lock release with 17 level working alignment heightsModel#: 44018Part#: 10267• 32 gallon rolling oil drain pan• Baffled for splash reduction• 1¼˝ gate valve standard with5´ evacuation hosePart # DescriptionAir Hydraulic rolling jackSAJ9S adjustable width 36˝- 52˝for 44018 and 44018EAir Hydraulic rolling jackSAJ9A adjustable width 36˝- 52˝for 44018AR and 44018X-AR10500 Powder coat turning radius gauges10500SS Stainless Steel turning radius gauges44RK18 Ramp kit, pivoting, 39˝ long44RKE18 Ramp kit, pivoting, 52˝ long for AR’s10267Oil drain pan kit,adjustable width, 32 gallonModel Number 44018 44018E 44018-AR 44018X-ARLift Capacity 18,000 lbs. 18,000 lbs. 18,000 lbs. 18,000 lbs.Maximum Wheelbase 194˝ 230˝ 236˝ 272˝Min. - Max. - 4 Wheel Align N/A 98˝ - 206˝Max. 2 Wheel Align N/A 220˝ 256˝Rise 78¾˝ 83 3 /8˝Overall Length 21´ 4˝ 24´ 4˝ 25´ 11½˝ 28´ 11½˝Overall Width 11´ 6 1 /8˝ 11´ 9½˝Overall Height8´ 6½˝Inside of Columns 121˝ 122˝Between Columns 204˝ 240˝ 204˝ 240˝Width of Runways 22˝Height of Runways 7¼˝ 11 7 /8˝Width Between Runways 36˝ - 54˝Motor 2HPVoltage - Single Phase 208 - 230vSpeed of Rise 60 sec.Amps 30Challenger Lifts, Inc.200 Cabel StreetLouisville, KY 40206toll free: 800.648.5438phone: 502.625.0700fax: 502.625.0711email: sales@challengerlifts.comwww.challengerlifts.comChallenger Lifts, Inc. reservesthe right to make changes withoutnotice and without making changesretroactive. Unloading, installationand oil not included.Lit# 44018-6/05©2005, Challenger Lifts, Inc.

44040series - 44060seriesHeavy Duty 4-Post Surface Mounted Liftsoptional accessories:Part # DescriptionSAJ1515,000 lbs. air hydraulic rolling jackadj. width 36˝- 52˝SAJ2525,000 lbs. air hydraulic rolling jackadj. width 36˝- 52˝SAJ3535,000 lbs. air hydraulic rolling jackadj. width 36˝- 52˝44RK40Ramp kit, fixed96´ long for drive thru operation10267 Oil drain pan kit, adj. width, 32 gallon10500HDHeavy duty powder coatedturning radius gaugesFeatures:• Single point, air actuated lock release system• Velocity fused redundant hydraulic safety system• Superior lifting system features tensile leaf chainand sealed roller bearings for maximum reliability• Dual cylinders provide stability while raisinguneven loads• Independent control consoleModel#: 44060Model Number 44040 44040E 44040X 44050 44050E 44050X 44060 44060E 44060XLift Capacity 40,000 lbs 40,000 lbs 40,000 lbs 50,000 lbs 50,000 lbs 50,000 lbs. 60,000 lbs. 60,000 lbs. 60,000 lbs.Maximum Wheelbase 310˝ 370˝ 430˝ 310˝ 370˝ 430˝ 310˝ 370˝ 430˝Min. - Max. - 4 Wheel Align N/A N/A N/AMax. 2 Wheel Align N/A N/A N/ARise 73˝ 73˝ 73˝Overall Length 36´ 41´ 46´ 36´ 41´ 46´ 36´ 41´ 46´Overall Width 17´ 1¼˝ 17´ 1¼˝ 17´ 1¼˝Overall Height 92˝ 92˝ 92˝Inside of Columns 144˝ 144˝ 144˝Between Columns 290˝ 350˝ 410˝ 290˝ 350˝ 410˝ 290˝ 350˝ 410˝Width of Runways 32˝ 32˝ 32˝Height of Runways 14˝ 14˝ 14˝Width Between Runways 36˝- 58˝ 36˝- 58˝ 36˝- 58˝Motor 10HP 15HP 15HPVoltage -3 Phase 230-460v 230-460v 230-4600vSpeed of Rise 70 sec. 75 sec. 75 sec.Amps 30 30 30Challenger Lifts, Inc.200 Cabel StreetLouisville, KY 40206toll free: 800.648.5438phone: 502.625.0700fax: 502.625.0711email: sales@challengerlifts.comwww.challengerlifts.comChallenger Lifts, Inc. reservesthe right to make changes withoutnotice and without making changesretroactive. Unloading, installationand oil not included.Lit# 44040-60-6/05©2005, Challenger Lifts, Inc.

“Introducing the newestmembers of our EnviroLift TM Family!”Challenger Lift’s New Heavy-Duty Cassette-Style Electric Inground Lifts are a greatway to add or expand your fleet servicecapabilities and increase your bottom line.With lifting capacities of 12,000 and15,000 lbs., they are the solutions foralmost any servicing need.Unlike traditional inground lifts, all ofour EnviroLift TM products are containedin a sealed container to protect yourinvestment and the environment. Theyare ideal for maximizing valuable bay spaceand are relocatable and leasable.Call us at 800-648-5438! Our nationalnetwork of authorized distributors andinstallers will be glad to show you how toraise your service to full capacity.We don’t just stand behind our products,we stand under them!TMwww.challengerlifts.com“IT’S THE BEST OFSURFACE AND INGROUNDLIFTS COMBINED!”12,000 & 15,000 lbs. Capacity!Shown:Model CS122012,000 lbs. liftingcapacity

EnviroLift Cassette Lifts -12,000/15,000 lbs. CapacityTMCS1220 Plan View (below)12,000lbs. Lifting CapacityCS1520 Plan View (above)15,000lbs. Lifting CapacityFeatures & Benefits:• Maximize the number of bays in your shop andgenerate more revenue potential (requires lessshop space than surface mounted lifts).• Eliminate the risk of vehicle door damage(no columns or overhead obstructions).• Low-profile arms and superstructure for easydrive-over clearance.• Unlike traditional inground lifts, the EnviroLiftsare removable, relocatable and leasable.• Convenient 3" incremental air actuatedlock system to raise vehicle at technician’sergonomic working height to minimize fatigueand increase productivity.For more information, contact your authorizedChallenger Lift Distributor:Challenger Lifts, Inc. reserves the right to make changes to specifications without notice and without making changes retroactive.Unloading, installation and oil not included.Attractive Lease Programs Available.GSA CONTRACT # GS-O7F-8950D • CAGE CODE 0KD44SIN#'s 253-23, 253-23A, 253-38 • DUNS# 79-435-3680Lit# CS1220 12/02©2002, Challenger Lifts, Inc.8 1 /2" PistonDiameterContainer Assembly (L x W x H)72 11 / 16" x 21 7 / 16" x 102 1 / 2"Major Credit and Debit Cards AcceptedStandard Adapter Accessories:ScrewAdapterSPECIFICATIONS Model: CS1220 Model: CS1520A. Rise Height* 81 1 /4" (2064mm) 84 3 /4" (2153mm)Stroke 68" (1727mm) 68" (1727mm)B. Width Overall 99" (2515mm) 71 1 /2" (1816mm)C. Drive-Thru Clearance 88" (2235mm) NAD. Reach (Arm Min.) 32" (813mm) 26 1 /4" (667mm)E. Reach (Arm Max.) 49 1 /4" (1251mm) 43" (1092mm)F. Adj. Adapter Height ** 5"- 71 /4" 6 1 /2"- 8 3 /4"(127 - 184mm) (165 - 222mm)G. Adj. Adapter Height** 8"- 10 1 /4" 10 1 /2"- 12 3 /4"(w/Medium Extensions) (203 - 260mm) (267 - 324mm)H. Adj. Adapter Height** 11"- 13 1 /4" 14 1 /2"- 16 3 /4"(w/High Extensions) (279 - 337mm) (368 - 425mm)Lifting Capacity 12,000 lbs. (5445kg) 15,000 lbs. (6806kg)Capacity (Per Arm) 3,000 lbs. (1361kg) 3,750 lbs. (1701kg)Motor 2HP 2HPVoltage (1 Phase Std.)*** 208v-230v 208v-230vSpeed of Rise 65 Seconds 80 SecondsAir Required 75 - 125 psi 75 - 125 psiRecommended Ceiling 82" plus height 85" plus heightHeight of tallest vehicle of tallest vehicle* Rise height is measured with superstructure in highest position.** Medium and high auxiliary adapter extensions are standard.*** Optional 3 phase electrical also available, please specify at time of order.MediumExtensionTo accommodate a wide variety of vehicles, adjustablescrew-type truck adapters and extensions are standardequipment. Standard equipment includes: four adjustablescrew-type adapters, four medium extensions and fourhigh extensions.MODEL DESCRIPTIONCSPK - Universal Pre-Kit for allEnviroLift Models (CS0920,CS1220 and CS1520 Series)CS1220CK - Completion Kit for12,000 lbs. EnviroLiftCS1520CK - Completion Kit for15,000 lbs. EnviroLiftCHALLENGER LIFTS, INC.200 Cabel StreetLouisville, Kentucky 40206Phone Toll-Free: 800-648-5438502-625-0700Fax: 502-625-0711E-mail: sales@challengerlifts.comHighExtensionOptional Adapter Accessories:To accommodate a wider variety ofvehicles, our optional slip-on luxurycar adapters give you the flexibility tosafely raise just about any vehicle thatcomes in for service. (For use withCS1220 EnviroLift only)1 1 /2”Slip-On Luxury Car Adapters (# 10300)The Automotive Lift Institute (ALI) certifiesthat the CS1220 and CS1520 described hereincomply with the applicable provisions of theAmerican National Standards ANSI/ALI ALCTV-1998 and are Third Party Validated by the ETLTesting Laboratory.www.challengerlifts.com

TM“Eliminate environmental concernsassociated with traditional inground lifts!”Challenger Lifts’ New EnviroLift TMCassette-Style Electric Inground Lifts arefully contained in a sealed container toprotect your investment and the environment.Maximize the bays in your shop to increaseyour revenue potential with our leasableand relocatable EnviroLift TM .Call us at 800-648-5438! Our nationalnetwork of authorized distributors andinstallers will be glad to show you how toraise your service to full capacity.We don’t just stand behind our products,we stand under them! TMwww.challengerlifts.comUses only 12 qtsof hydraulic fluidShown:Model CS1020W10,000 lbs. liftingcapacity

Features & Benefits:EnviroLiftTMCassette Lifts - 10,000 lbs. CapacityMaximize the number of bays in your shop andgenerate more revenue potential (requiresless shop space than surface mounted lifts).Eliminate the risk of vehicle door damage(no columns or overhead obstructions).Widest drive-thru in the industry.Low stress structural design for longer life andbetter reliability.EnviroLifts are removable and relocatable.Convenient 3" incremental air actuated lock system toraise vehicle at technician’s ergonomic working height tominimize fatigue and increase productivity.Arm Design Configurations:SPECIFICATIONS Model: CS1020W*A. Rise Height** 78˝ (1981mm)B. Width Overall 97˝ (2464mm)C.Drive-Thru Clearance 87˝ (2210mm)D. Reach (Long Arm Min.) 26 1 /2˝ (673mm)E. Reach (Long Arm Max.) 39˝ (991mm)F. Reach (Asym. Arm Min.) 24 3 /8˝ (619mm)G. Reach (Asym. Arm Max.) 35 13 /16˝ (910mm)H. Min. Adapter Height 4˝ (102mm)I. Low Step Height 6 1 /2˝ (165mm)J. High Step Height 10 ˝ (254mm)Lifting Capacity10,000 lbs. (4535kg)Capacity (Per Arm) 2,500 lbs. (1134kg)Motor2HPVoltage (Single Phase Std.)*** 208v-230vSpeed of Rise48 SecondsAir Required75 - 125 psiMin. Recommended 10´ x 20´Bay Size(3048mm x 6096mm)Recommended79˝ plus heightCeiling Heightof tallest vehicle* Standard models include a 3-position “flip-up” superstructure.“Screw-type” rubber pad superstructure models also availableat NO EXTRA COST, please specify superstructure preferenceat time of order (see below).** Rise height is measured with “flip-up” superstructure inhighest position.*** Optional 3 phase electrical also available, please specify at time of order.Optional Adapter Accessories:Adj. Screw Type:Reach ranging between highestand lowest screw positionsFor more information, contact your authorized Challenger Lift Distributor:The Automotive Lift Institute (ALI) certifiesthat the CS1020W Series described hereincomply with the applicable provisions of theAmerican National Standards ANSI/ALI ALCTV1998 and are Third Party Validated by the ETLTesting Laboratory.Challenger Lifts, Inc. reserves the right to make changes to specifications without noticeand without making changes retroactive. Unloading, installation and oil not included.Attractive Lease Programs Available.GSA CONTRACT # GS-O7F-8950D • CAGE CODE 0KD44SIN#'s 253-23, 253-23A, 253-38 • DUNS# 79-435-36803 Position Flip-Ups:Three height positions:low, medium, and high.Major Credit and Debit Cards AcceptedSlip-On LuxuryCar Adapter Pair(# 10300)6˝ Screw typeTruck Adapter Pair(# 10303)MODEL DESCRIPTIONCSPK - Universal Pre-Kit for all EnviroLift Models(CS1020W, CS1220 and CS1520 Series)CS1020WCK - Completion Kit for EnviroLiftCS1020LS - EnviroLift Less Superstructure - for alignment purposesCS1020WSSA - Asymmetric Superstructure Only - 3-position “flip-up”CS1020WSSAR - Asymmetric Superstructure Only - “screw-type” rubber padCS1020WSSFP - Symmetric Superstructure Only - 3-position “flip-up”CS1020WSSRP - Symmetric Superstructure Only - “screw-type” rubber padCS1020WSSE - European Superstructure Only - 3-position “flip-up”CS1020WSSER - European Superstructure Only - “screw-type” rubber padCHALLENGER LIFTS, INC.200 Cabel StreetLouisville, Kentucky 40206Phone Toll-Free: 800-648-5438502-625-0700Fax: 502-625-0711E-mail: sales@challengerlifts.com10˝ Screw typeTruck Adapter Pair(# 10304)5˝ Flip-Up TruckAdapter Kit Pair(# 16621)www.challengerlifts.comLit# CS1020W 07/05©2005, Challenger Lifts, Inc.

IDEAL FOR SERVICING:Tires & BrakesDetailingBody RepairInspectionsCustomizingEstimatingRefinishingand much more!Challenger Lift’s Portable Mid-Rise Liftsare a great way to increase the productivityin your shop. It’s like having a service bayanywhere you want...indoors or out!Our 66000 Series Mid-Rise Lifts are availablewith either an electric or pneumaticmotor to accommodate specialized serviceenvironments, like body shops. Motor isconveniently mounted to a heavy-duty towdolly, making it easy to move and operateon almost any solid surface.Features include a sliding/rotating armdesign with rubber pads, low drive-overclearance, and much more.Call us at 800-648-5438, our nationalnetwork of authorized distributors andinstallers will be glad to show you how toraise your service to full capacity.We don’t just stand behind our products,we stand under them!TMIt’s likehaving alift inany bay!www.challengerlifts.comShown: Model 660006,000 lbs. lifting capacity

Portable Mid-Rise Lifts -6,000 lbs. CapacitySPECIFICATIONS Model: 66000 Model: 66000AA. Rise 48" (1219mm) 48" (1219mm)B. Length Overall 7' 6" (2286mm) 7' 6" (2286mm)C. Width Overall 3' 3 3 /8" (1000mm) 3' 3 3 /8" (1000mm)D. Min. Collapsed Height 3 3 /8" (98mm) 3 3 /8" (98mm)E. Pad Height (Minimum) 5 1 /2" (140mm) 5 1 /2" (140mm)F. Pad Height (Maximum) 49 1 /2" (1257mm) 49 1 /2" (1257mm)Lifting Capacity 6,000 lbs. (2722kg) 6,000 lbs. (2722kg)Hydraulic Hose 12' (3658mm) 12' (3658mm)Safety Lock Positions 4 4Electric Motor 1 HP naVoltage (Single Phase) 115v naPneumatic Motor na 2 HPAir Supply Required na 100 psiSpeed of Rise 45 Seconds 65 SecondsMin. Recommended 10' x22' 10' x22'Bay Size(3048mm x 6706mm) (3048mm x 6706mm)Standard lift colors are Red (as shown) and Blue.Slip-On Adapter KitIncluded:All Portable Mid-RiseLifts come with four(4) Rubber PadAdapters and“Height 2 1 /4"Extension”.Other Features:Power UnitFeatures:Convenientsingle pushbutton powerunit raiseslift and a releasevalve handlelowers it.Portable Mid-Rise Lift comes with either electric or pneumatic powerunit conveniently mounted to heavy-duty tow dolly for easy movementaround the shop (see front cover).Optional Accessories:66100 - Includesfour (4) Adjustable“Screw-Type”Adapters for higherframe vehicles.Adapters incorporaterubber pads to protecta vehicle’s delicateundercoating.Four (4) “Frame-Engaging” AdapterCovers also included.Frame-EngagingAdapter Cover4 3 /4"to7"For more information, contact your authorized Challenger Lift Distributor:Challenger Lifts is a member of theAutomotive Lift Institute (ALI). This symbolrepresents over 50 years of dedication to liftsafety by providing rigorous safety standardsand training.Challenger Lifts, Inc. reserves the right to make changes to specifications without notice and without making changes retroactive.Unloading, installation and oil not included.Attractive Lease Programs Available.GSA CONTRACT # GS-O7F-8950D • CAGE CODE 0KD44SIN#'s 253-23, 253-23A, 253-38 • DUNS# 79-435-3680Lit# 66000 9/02©2002, Challenger Lifts, Inc.CHALLENGER LIFTS, INC.200 Cabel StreetLouisville, Kentucky 40206Phone Toll-Free: 800-648-5438502-625-0700Fax: 502-625-0711E-mail: sales@challengerlifts.comMajor Credit and Debit Cards Acceptedwww.challengerlifts.com

Model#: 50050cart positionPortable TailgateSupport StandUniversal round head(part #: 50040-50)Model#: 50050stand positionRetrofittable brake for 50040(part #: 50040-60)Challenger Lifts’ original tailgate support stand is designed to support the tailgate of sanitationtrucks while conducting preventative maintenance and repairs to the hydraulic systems.Challenger Lifts, Inc.200 Cabel StreetLouisville, KY 40206Features:• 12,000 lbs. capacity per stand• 30˝ triangular basetoll free: 800.648.5438phone: 502.625.0700fax: 502.625.0711email: sales@challengerlifts.com• Stabilizing brake to ensure accurate and safe placement• 5 position secondary load holding pinwww.challengerlifts.comalso available:• Infinitely adjustable height from 7´ - 10´• Universal round headmodel#: 5002417,000 lbs. capacityadj. 36˝-56˝model#: 5001817,000 lbs. capacityadj. 60˝-80˝• New 5½˝ round contact pad adapter with replaceable rubber insert swivels 360˚• 2½˝ diameter Square thread double lead screw give 1˝ height adjustment foreach revolution of the nut• 4 rubber 6˝ wheels with greaseable roller bearings ( 2 fixed and 2 swivel casters)• Stand may be moved like a dolly, using the 2 fixed wheels for short distances or positionthe double swivel wheeled “drop-leg” to move the like a cart for longer distancesChallenger Lifts, Inc. reservesthe right to make changes withoutnotice and without making changesretroactive. Unloading, installationnot included.Lit# 50050-6/05©2005, Challenger Lifts, Inc.