Practice of Pile Foundation Treatment Based on ZSOIL.PC

More documents

Recommendations

Info

<strong>Practice</strong> <strong>of</strong> <strong>Pile</strong> <strong>Foundation</strong> treatment<strong>Pile</strong> static load test• We select 7.0~8.0m shorter piles to implement pile static load test. If thebearing capacity <strong>of</strong> the shortest piles is OK, <strong>of</strong> course ,the capacity <strong>of</strong> otherpiles will be OK.<strong>Pile</strong> static load testSteel beamHydraulic jacks
<strong>Practice</strong> <strong>of</strong> <strong>Pile</strong> <strong>Foundation</strong> treatment<strong>Pile</strong> static load testsettlement (mm)0102030407m shorter0 1000 2000 3000 4000 5000Load (kN)• Three 7.0m shorter piles areselected to test. We select the shortest piles torepresent the whole piles.• According to the diagraph <strong>of</strong> load vs.settlement, the max. load <strong>of</strong> the testis about 4750kN.• The current bearing capacity <strong>of</strong> thetested pile is 4750/2=2375kN. The design bearing capacity is2500kN. The current bearing capacity is about5% smaller than the design value.• Is the current bearing capacityenough ? What the 3d FEM analysis tell us?
Page 3: • Functions related to Pi
Page 6 and 7: 侧摩阻力 (kPa)18016014012010
Page 8 and 9: Functions related to Pile</
Page 10 and 11: • Practice <stro
Page 12 and 13: Practice o
Page 30 and 31: Acknowledgements• Thanks to the d

Practice of Pile Foundation Treatment Based on ZSOIL.PC

Create successful ePaper yourself

Delete template?

Save as template?