Practice of Pile Foundation Treatment Based on ZSOIL.PC

Practice of Pile Foundation Treatment Based on ZSOIL.PC Practice of Pile Foundation Treatment Based on ZSOIL.PC

12.07.2015 Views

ong>Practiceong> ong>ofong> ong>Pileong> ong>Foundationong> treatmentGeneral information• Information ong>ofong> pile Pre-stressed concrete pipe pile(PHC), diameter 500mm, thickness 125mm,length 30.0m(segment I :15m + segment II :15m), bearing capacity 2500kN Static piling method is used to drive the pileGround surface ,+30.86mBottom ong>ofong> basement ,+13.86mong>Pileong> length, 30mStatic driving machineBottom ong>ofong> pile ,-16.14mPHC500, 15m lengthper segment

ong>Practiceong> ong>ofong> ong>Pileong> ong>Foundationong> treatmentGeneral information• Layout ong>ofong> piles 594 PHC piles are employed to supportthe gravity ong>ofong> the building “grid” type layout is used, for thebearing capacity ong>ofong> each pile is not highenough The distance between two neighboringpiles is 2.0m, which is the min. pilespacing according to the code forChinese pile foundation

<str<strong>on</strong>g>Practice</str<strong>on</strong>g> <str<strong>on</strong>g>of</str<strong>on</strong>g> <str<strong>on</strong>g>Pile</str<strong>on</strong>g> <str<strong>on</strong>g>Foundati<strong>on</strong></str<strong>on</strong>g> treatmentGeneral informati<strong>on</strong>• Informati<strong>on</strong> <str<strong>on</strong>g>of</str<strong>on</strong>g> pile Pre-stressed c<strong>on</strong>crete pipe pile(PHC), diameter 500mm, thickness 125mm,length 30.0m(segment I :15m + segment II :15m), bearing capacity 2500kN Static piling method is used to drive the pileGround surface ,+30.86mBottom <str<strong>on</strong>g>of</str<strong>on</strong>g> basement ,+13.86m<str<strong>on</strong>g>Pile</str<strong>on</strong>g> length, 30mStatic driving machineBottom <str<strong>on</strong>g>of</str<strong>on</strong>g> pile ,-16.14mPHC500, 15m lengthper segment

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!