pistons for vintage sleds

CloseoutsPrices in this section are Net.ElectricalExhaustPartsDriveSystemTracks &SuspensionTRACK SAVER TOOLYou need this tool for holding T-nuts while installing or removing. Three pins fi t the T-nut prong slotsand hold it fi rmly. Snaps on any 3/8” drive ratchet.¾” T-nuts PART NO. ATT-4260 $ 10.001” T-nuts PART NO. ATT-4270 $ 10.00TRACK MARKERSA white dot to contrast against the black track makes the placement of the drill hole never a question.PART NO. TRAK-MARK $ 5.00Brakes &CablesWindshieldsPUSH-THROUGH STUD SHARPENING TOOLSharpens all push-through studs. The stud is slipped inside the tool and is securedtightly with one turn. Chuck the tool up to your 3/8” electric drill for easy, fast, repetitivesharpening against a bench grinder. Allows you to re-sharpen to original point or modifyfor racing applications.3/4”-7/8” PART NO. MAS-TOOL $ 25.00CarburationSteeringEnginePartsDriveBeltsStarterPartsGRASS PLUSA scooper plate that works on grass, ice and snow. Has a 45° angle that lays fl at against therubber lug and the track. Two arrow-head scoopers extend above the surface of the track.SIZE BEST USE PART NO. PACKAGE PRICE.850” Trail DPS-8500 12 plates $ 25.001.100” Trail DPS-1000 12 plates $ 25.00BIG NUTThe Aluminium Bit Nut with a 5/16” – 24 threads provides added support to longer length studsUse ALN-7000 for 1.450” studs and longer.Available in packages of 24 & 96.STUD SIZE THREAD PART NO. PRICE1.450”+ 5/16” ALN 7000 (24) $ 8.001.450”+ 5/16” ALN 7000-B (96) $ 27.00AccessoriesTractionSTEEL STAR WASHERSID-THICKNESS QUANTITY PART NO. PRICE¼” - .025” 48 HSW-4800 $ 4.00ToolsATVOil &FiltersT-NUT TOOLAssists in the installation of T-nuts in all types of tracks. With the tool, pull the T-nut in place,then hold the T-nut in place from the backside and remove the tool. Put a drop of Loctite inthe threads of the T-nut and stud, torque to 70-80 in/lbs and let dry.¼”-20 T-nuts PART NO. AST-4050 $ 5.00CloseOuts614winnerscirclecanada.com • Tel 905.475.2552 • Fax 905.477.3270