Power Spot 250 User Manual (pdf) - Elation Professional

More documents

Recommendations

Info

Power Spot 250warranty. Please fill out the enclosed warranty card to validate your purchase. All returnedservice items whether under warranty or not, must be freight pre-paid and accompany areturn authorization (R.A.) number. The R.A. number must be clearly written on the outsideof the return package. A brief description of the problem as well as the R.A. number mustalso be written down on a piece of paper and included in the shipping container. If the unitis under warranty, you must provide a copy of your proof of purchase invoice. Itemsreturned without a R.A. number clearly marked on the outside of the package will be refusedand returned at cutomers exspence. You may obtain a R.A. number by contacting customersupport at (323) 582-3322, extension 170.DISCHARGE LAMP WARNING: This fixture is fitted with a dischargelamp, which is highly susceptible to damage if improperly handled.Never touch the lamp with your bare hands, as the oil from your handswill shorten lamp life. Also, never move the fixture until the lamps havehad ample time to cool. Remember, lamps are not covered underwarranty conditions.This fixture emits intense UV radiation, which is harmful to the eyes and skin. The intenseluminance of the lamp can cause severe damage to the retina. Never operate this fixturewithe covers have been specially designed to shieldagainst UV radiation.Epileptic Warning: Those suffering from epilepsy should avoid looking directly into thelamp at all times.Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamplife and intensity.To achieve the intensity associated with discharge lamps, these lamps use a gas sealedin a high-pressure environment to emit a brilliant output. Due to the high pressure involvedwith the construction of the lamp, the lamp may explode during prolonged extensive use.This risk is increased with age; added care is encouraged when dealing with older lamps.Thus, lamp should always be replaced at the end of their recommended duty cycle.Extreme caution should be used when operated this or any fixture fitted with a gasdischarge lamp.Never open this fixture while in use!During the initial operation of this fixture, a light smoke or smell may emit from the interiorof the fixture. This is a normal process and is caused by excess paint in the interior of thecasing burning off from the heat associated with the lamp.©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 6
Power Spot 250Safety InstructionsThe Power SPOT 250 is an extremely sophisticated piece ofelectronic equipment. To guarantee a smooth operation, it isimportant to follow the guidelines in this manual. Themanufacturer of this device will not accept responsibility fordamages resulting from the misuse of this fixture due to thedisregard of the information printed in this manual.1. Always be sure that the fan and the air inlets remain clean and are never blocked.Allow about 6” (15cm) between this fixture and other devices or a wall to allow forproper cooling.2. Never touch the fixture during normal operation. This can cause severe personalinjuries and/or damage to the fixture.3. Be sure to unplug the POWER SPOT 250 from the power outlet beforeperforming any service related issues.4. Lamp Replacement; Allow at least 30 minutes after disconnecting main powerbefore you open the POWER SPOT 250. To prevent personal injury, never touchthe lamp if you are not absolutely sure it has cooled.5. Never look directly into the lamp beam. You risk injury to your retina, which mayinduce blindness.6. Be sure to track and record the lamp running time. The lamp should be changedat the end of the specified lamp life, regardless of lamp output. You may also haveto change the lamp if it shows any deformations or damage. The same is with allglass components, color filters, lenses and mirrors.7. For safe operation, follow the Installation guide described in chapter two of thismanual. Operating the POWER SPOT 250 without suited safety aids such assafety cables or clamps can increase the risk of damage and/or personal injury.8. Installation should only be performed by qualified and certified personal.9. When mounting this fixture, use only the original rigging parts included with thisfixture. Any structural modification will void the original manufactures warranty andmay increase the risk of damage and/or personal injury.10. To reduce the risk of fire or shock, do not expose this unit to rain or moisture.11. Do not attempt to operate this fixture if the power cord is frayed or damaged.©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 7
Page 1 and 2: User ManualSoftware Version 1.60 Re
Page 3 and 4: Power Spot 250Table of ContentsIntr
Page 5: Power Spot 250INTRODUCTION: Congrat
Page 9 and 10: Power Spot 2501. Lens Assembly - Th
Page 11 and 12: Power Spot 2502. Preparation and In
Page 13 and 14: Power Spot 2502.3 Connections2.3.1
Page 15 and 16: Power Spot 2502.8 5-Pin XLR DMX Con
Page 17 and 18: Power Spot 250SHUT Shutter, Channel
Page 19 and 20: Power Spot 250sound impulse will tr
Page 21 and 22: Power Spot 2508 Prism, Prism rotati
Page 23 and 24: Power Spot 250Function Value Remark
Page 25 and 26: Power Spot 250Mode button to cancel
Page 27 and 28: Power Spot 2504. OperationOperating
Page 29 and 30: Power Spot 2505. DMX CHANNEL SELECT
Page 31 and 32: Power Spot 250Channel Function Time
Page 33: Power Spot 2506. Lamp ReplacementFo
Page 36 and 37: Power Spot 2507. Fuse ReplacementCa
Page 38 and 39: Power Spot 250Special Notice:If you
Page 40 and 41: Power Spot 250depends on the enviro
Page 42 and 43: Power Spot 2502 YEAR (730 DAYS) LIM
Page 44 and 45: LASER WARNING LABELSDANGER! !VISIBL
Page 46 and 47: ©Elation Professionals® Los Angel

Power Spot 250 User Manual (pdf) - Elation Professional

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?