Power Spot 250 User Manual (pdf) - Elation Professional

Power Spot 2507. Fuse ReplacementCaution: Always replace with the exact same type fuse, unless otherwise specified by anauthorized Elation® service technician. Replacing with anything other than the specified partcan damage your unit and will void your manufactures warranty.Warning: If you continue to blow fuses, STOP using the fixture. Contact customer supportfor further instructions, you may have to return the unit for servicing. Continuing to use theunit may cause serious damage.Fuse Replacement: Locate and remove the unit’s power cord from the main power supply.Once the cord has been removed located the fuse holder located on the side panel of thenear the power. Using a flat-head screwdriver remove the fuse holder from its’ housing.Gently pull out the bad fuse and discard of it properly and replace with an exact match.Reassemble in reverse order.©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 36