BCT-2000 Software and BCT-128 and BCT-256 User's Guide - Alber

13.5. Criteria ScreenClick the Criteria tab to display the Criteria dialog box.Figure 36. CriteriaTime Interval and OV Deviation - Click Time Interval or OV Deviation and type a value, orclick the time or voltage buttons next to the boxes. The Report Interval determines thefrequency of report sampling. Specify time in hours, minutes, and seconds (10 secondminimum) or OV deviation in volts (0.2 volt minimum).Low Cell Threshold and Low OV Threshold - The Alarm Threshold Values area is enabledfor all tests except Charger. The thresholds are the cell and OV shutdown levels entered intest setup, or the last levels entered during the test. On the report, values that violate thesethresholds are printed in color and with brackets ( < > ) for black ink printers. These valuesmay be changed if desired.High Voltage Warning and Low Voltage Warning - For the Charger test, the AlarmThreshold Values area changes to Charger Warning Levels. These are the warning levelsentered in test setup, or the last levels entered during the test. On the report, values thatviolate these thresholds are printed in color and with brackets ( < > for low thresholdviolation and > < for high threshold violation) for black ink printers. These values may bechanged if desired.Rated Time - Rated Time is used by Capacity test reports and may be modified at reporttime.44