Horus® - Leupold
Horus® - Leupold Horus® - Leupold
9Dialing the Correction Into the ScopeThe most effective way to use the estimated distance is to dial the necessarycorrection into the scope using the elevation adjustment. If your scope featuresa bullet drop compensation dial, simply dial the correction directly according tothe distance marked on the elevation dial. If your scope does not have a bulletdrop compensation dial and your bullet drop has been measured in milliradians,simply use the elevation adjustment to make the appropriate correction.For example, if you need to allow for a bullet drop of 2 mils, you will simplydial 2 mils (20 clicks) in the up direction.Holding Over Using the HORUS ReticleSSometimes there isn’t time for correction using the scope’s adjustment mechanisms.In these cases, holding over the target and using the reticle’s markingsas an aiming point is useful. It must be remembered that holding over is not asexact as dialing elevation.
111315171921232527293133353757131 19 9U.S.Pat. 6.032.374U.S.Pat. 5.920.99513571113151719212325272931333537Horus H27 Reticle SUBTENSIONS1 1113355779 91111H 27DETAIL VIEW XNON-ILLUMINATED131513155.0 mil = 18.000" 0.20 mil = 0.720"@100 Yards 1.0 mil = 3.600" 0.15 mil = 0.54"0.5 mil = 1.800" 0.10 mil = 0.360"0.4 mil = 1.400" 1.0 mil = 3.438 Minutes of Angle = 3.600"10
- Page 1 and 2: Horus ®RETICLE SUPPLEMENTH27, H32,
- Page 3 and 4: The Horus ReticleProducts containin
- Page 5 and 6: The base scale for Horus reticles i
- Page 7 and 8: (Height of Target in Yards x 1,000)
- Page 9: Example 1: If you have a 500 yard/m
- Page 13 and 14: Horus H36 Reticle SUBTENSIONSDETAIL
- Page 15 and 16: Horus H58 Reticle SUBTENSIONSDETAIL
- Page 17 and 18: YIELDS ESTIMATED TARGET DISTANCE IN
- Page 19 and 20: YIELDS ESTIMATED TARGET DISTANCE IN
- Page 21 and 22: YIELDS ESTIMATED TARGET DISTANCE IN
- Page 23 and 24: value of mils in CENTIMETERs at dis
- Page 25 and 26: Leupold Technical ServiceTo contact
- Page 27 and 28: Notes26
111315171921232527293133353757131 19 9U.S.Pat. 6.032.374U.S.Pat. 5.920.99513571113151719212325272931333537Horus H27 Reticle SUBTENSIONS1 1113355779 91111H 27DETAIL VIEW XNON-ILLUMINATED131513155.0 mil = 18.000" 0.20 mil = 0.720"@100 Yards 1.0 mil = 3.600" 0.15 mil = 0.54"0.5 mil = 1.800" 0.10 mil = 0.360"0.4 mil = 1.400" 1.0 mil = 3.438 Minutes of Angle = 3.600"10