Lambda 20/Lambda 40 Installation and Maintenance Guide - VTP UP

More documents

Recommendations

Info

Lambda 20, Lambda 40 UV/Vis Spectrometers3. Replace the spent fuse with a new one of the same type and rating:VoltageStandard100 V – 120 V 6.3 A slow-blow210 V – 240 V 3.15 A slow-blowNOTE: The module has two fuses.4. Replace the fuse holder.Align the lug at the bottom of the fuse holder with the slot in the socket. Aclick is heard as each lug snaps into place.NOTE: If you use the correct fuses but the instrument still does not work correctly, or thefuses blow repeatedly, contact your PerkinElmer office or representative.Maintaining the Internal PrinterThe internal printer needs no special maintenance. You only need to:• Change the printer paper• Change the printer ribbonwhen necessary.Changing the Printer Paper1. Lift off and remove the old paper roll.2. Replace with a new paper roll.3. Cut square the end of the paper.4. Carefully feed the end of the paper into the slot at the top of the printer.66
Maintenance5. Press 4 Print to feed the paper through the printer until it appears at the front.Changing the Printer Ribbon1. Lift off and remove the paper roll.2. Push in the catch on the printer cover.3. Carefully lift out the printer.4. Gently pull the ribbon cassette forwards to remove.5. Replace with a new one.6. Replace the printer and printer cover using the reverse of the above procedure.67
Page 2:
Release HistoryPart Number Release
Page 5:
Safety Information 1
Page 8 and 9:
Lambda 20, Lambda 40 UV/Vis Spectro
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17: Lambda 20, Lambda 40 UV/Vis Spectro
Page 19 and 20: PrefacePrefaceApplicationThe Lambda
Page 21: Basic Installation 3
Page 24: Lambda 20, Lambda 40 UV/Vis Spectro
Page 39 and 40: Accessory InstallationAccessory Ins
Page 41 and 42: Accessory InstallationJ88, Sphere I
Page 43 and 44: Accessory InstallationLinear Transp
Page 45 and 46: Accessory InstallationMulti-sippers
Page 47 and 48: Accessory InstallationPersonal Comp
Page 49: Maintenance 5
Page 59 and 60: Maintenance5. Remove the lamp assem
Page 61 and 62: MaintenanceLamp baffleThumbscrew(de
Page 63 and 64: MaintenanceWARNINGElectrical Hazard
Page 65: MaintenanceChanging FusesWARNINGEle
Page 69: Replacement Parts 6
Page 75 and 76: System DescriptionSystem Descriptio
Page 77 and 78: System DescriptionHalogenlampM2M =
Page 79 and 80: System DescriptionThe radiation is
Page 81: Technical Data 8
Page 93 and 94: Translations of WarningsTranslation
Page 95 and 96: Translations of Warnings95
Page 103: Index 10
Page 106: Lambda 20, Lambda 40 UV/Vis Spectro
show all

Lambda 20/Lambda 40 Installation and Maintenance Guide - VTP UP

Create successful ePaper yourself

Delete template?

Save as template?