Avance Ultimate Wok - Breville

Care and cleaning• Allow the Avance Ultimate Wok to cool downbefore cleaning.• Before cleaning, switch the wok to ’MIN‘ andunplug from the power outlet. Remove thetemperature control probe from the socket in theappliance by depressing the ‘easy release’ lever onthe side of the probe (refer page 6).• Do not leave plastic cooking utensils in contactwith the wok while cooking.Temperature control probe• If cleaning is necessary, wipe over the unit witha slightly damp cloth.Do not immerse the cord, plug or temperaturecontrol probe in water or any other liquid.Never place oil or food into a cold wok while itis heating, this will give a poor cooking result.NoteFor convenient storage of the temperatureprobe, line the wok bowl with two sheetsof kitchen paper and place the probe on thekitchen paper. This will ensure the probe andplug doesn’t scratch the non-stick coating.Quantanium scratch resistant coatingNoteYour Avance Ultimate Wok features a special scratchresistant non stick coating.Regardless of this fact, Breville recommends that careis taken with the non-stick coating. A plastic spatulahas been provided for your use.Do not use sharp objects or cut food inside theAvance Ultimate Wok. Breville will not be liable fordamage to the non-stick coating where metal utensilshave been used.Cooking on a non-stick surface minimises the needfor oil, food does not stick and cleaning is easier.Any discolouration that may occur will only detractfrom the appearance of the Avance Ultimate Wok andwill not affect the cooking performance.To clean interior and exterior surfaceWhen cleaning the non-stick coating do not usemetal (or other abrasive) scourers. Wash in hot soapywater. Remove stubborn spots with a plastic scouringpad or nylon washing brush.StorageStore the control probe carefully. Do not knock ordrop it as this can damage the probe. If damage issuspected, return the temperature control probe toyour nearest Breville Service Centre for inspection.