SURGICAL KIT REFERENCE DRILL SEQUENCE ... - BioHorizons

laser-lok 3.0SURGICAL KIT REFERENCE122-200Tissue Punch144-100StraightParallel Pins(2 per kit)122-4251052.5 x 10.5mmDepth DrillExtended ShankTP3CBDCrestal Bone DrillTP3IDHImplant-level Driver,Handpiece*300-351.050” (1.25mm)Hex Driver, Long*122-4032.0mm Starter DrillExtended Shank144-20020° AngledParallel Pin(1 per kit)122-425122.5 x 12mmDepth DrillExtended Shank122-900Bone TapTP3IDRImplant-level Driver,4mm square*300-400Hand Wrench*130-000Ratchet122-4252.5mm Depth DrillExtended Shank122-425152.5 x 15mmDepth DrillExtended Shank*instrument o-rings & c-rings wear out over time. If an instrument is no longer heldsecurely by its associated driver, order a replacement ring through Customer Care.The chart below illustrates the recommended drilling sequence for the BioHorizons Laser-Lok 3.0 Implant system. Clinical judgement in respect to each individualpatient must supersede any recommendation made here. See the Laser-Lok 3.0 Product Catalog and Technique Manual (ref. L01300) for further details.DRILL SEQUENCEDRILL MARKINGS15mm12mm10mmDrill stopmatchesimplantlength18mm15mm12mm10.5mmStarter & Depth DrillsBone TapStarter DrillDepth DrillCrestal Bone Drill(site specific)Bone Tap(site specific)Implant-levelDriverUsed to piercecortical bone.Depth Drill withstop correspondsto matching implantlength. Depth Drillwithout stop is alsoavailable.Used to widencrest for implant.Drill stop is 1mmabove the lasermark for unevenridges or D1 bone.Tap requiredin dense bone;stop whenresistance givesor desired depthis reached.Place implantmatching thelength of thepreparedosteotomy.©2010 BioHorizons, Inc. All Rights Reserved. Images shown not to scale. L01301 Rev A MAR 2010customer care: 888.246.8338shop online at biohorizons.com

laser-lok 3.0SURGICAL KIT REFERENCE& DRILL SEQUENCE CHART*L01301*L01301REV A MAR 2010