Model 282 - Teledyne Hastings Instruments

More documents

Recommendations

Info

Hi / Lo Relays ............................................................................... SPDT N.O./N.C. up to 125VAC 10A or 277VAC 6AWith onetime ≈10sec. delay to prevent relay chater,only during unit power up.Operational Limits ....................................................................................... 0 to 50 O C
2.0 GAUGE TUBE AND CABLES2.1 Gauge Tubes:Octal sockets of standard metal tubes are color-coded for easy identification; DV-273 is dark blue. The tubes are to beinstalled in 1/8" NPT female thread, or in a <strong>Hastings</strong> type OS Quick Connector. Maximum overpressure of gauge tube is 150psi. Construction of shell is of Nickel-plated steel. See section 1.2 for Operating Principle.2.2 Gauge Tube Cables:The four color-coded wires (Black, Red, White, Green) are connected as shown on the label on the top of can. See Figure 2.1for socket connections.Each instrument is shipped with a 6-foot power cable and an 8-foot gauge tube cable. Extension gauge tube cables areavailable. (See table in Sec-1.5).FIG.2.1PAGE 7
Page 1 and 2: INSTRUCTIONMANUALMODEL HVC-282VACUU
Page 3 and 4: TABLE OF CONTENTSSECTION 1.0 GENERA
Page 5: 1.0 GENERAL INFORMATIONThis manual
Page 9 and 10: 4.0 OPERATION1) Plug in power cable
Page 11 and 12: f) Adjust outside pot to read 2.630
Page 13 and 14: 7.0 SERVICE INFORMATION7.1 Warranty
Page 15 and 16: 7.3 Service Form:Teledyne Hastings
Page 17 and 18: 8.0 DRAWINGS and DIAGRAMSThis secti
Page 19 and 20: PAGE 19

Model 282 - Teledyne Hastings Instruments

Create successful ePaper yourself

Delete template?

Save as template?