MechanicalProductRange - Drive Lines Technologies

Separating StopsBrakes/ClutchesDamped and Undamped SeparatingStops; Electrical Stops; Position SensorsThe range of separating stops includes pneumaticallyoperated damped and undamped stops in multiconfigurationvariants compatible with varioustransfer systems. The stops offer infinitely adjustabledamping for gentle stopping of pallet holders.Single or dual acting with optimal position sensors.For sites without compressed air, electrically operatedstops have integrated sensors for selecting thestopping plate position.Angle dampers, anti-bounce stops, position sensorsand customer bespoke stops are all available toensure complete configuration of your transfer line.Damped and undampedPneumatic or electricalHigh compatibilityMulti-configurationPosition sensorsHysteresis Tension Control; HoldingBrakes; Electromagnetic ReplacementClutches and BrakesThe hysteresis tension control brakes and clutchestogether with the ERM control unit, provide exactcontrol of tensile forces in manufacturing of endlessproducts such as wire, cable, paper and foil.The non-contact, continuously variable torquetransmission results in wear and maintenance freeoperation.We can supply a full range of replacement brakesand clutches – electromagnetic, permanent magnet,multiple disc, single disc, toothed from original andequivalent manufacturers when the originals are nolonger available.Spare discs and current supply brushes are alsosupplied.Tension control from 0.08 to 520 NmNon-contact, wear freeSlip power up to 2000 WReplacements for obsolete brakes and clutchesSpares supply