TM9-2815-226-34-1 - JATONKAM35s HOME ON THE WEB

TM 9-2815-226-34-1(2) Remove keeper bar from magnetic poles.(3) Place magnet on areas being inspected.NOTEWhen dispensing powder, hold thumb partially over spray bulb head to keep capfrom blowing off.(4) Spray moderate amount of powder on area to be checked. Powder will remain in cracks and will show as awhite line.(5) If cracks discovered in bolt circle front or rear flanges, flex disk and ring gear assembly must be replaced.(6) Wipe assembly clean.b. Inspect ring gear.(1) Inspect ring gear for broken, cracked, or worn teeth.(2) If ring gear defective, replace flex disk and ring gear assembly. Ring gear and flex disk cannot beseparated.3-227/3-228(blank)