TM9-2815-226-34-1 - JATONKAM35s HOME ON THE WEB

TM 9-2815-226-34-1CAUTIONDO NOT DRILL HOLE ALL THE WAY THROUGH OIL SEAL CASING. DRILLINGHOLE THROUGH REAR FACE OF CASING CAN DAMAGE GEAR CASE COVER.(4) Using a no. 31 drill bit (0.120 in. [3.048 mm]) and drill, insert drill bit into drill pilot and carefully drill holethrough front face of oil seal casing.(5) Remove drill bit and drill pilot.(6) Install drill pilot in second and third holes of top plate and drill two more pilot holes in front face of oil sealcasing.(7) Remove drill pilot.(8) Screw three ST-1259-6 seal puller screws into top plate until pointed tips of screws penetrate oil seal frontcasing.(9) Carefully turn seal puller screws into oil seal from casing. Pointed tips of screws are followed by no. 10-16sheet metal screw threads which will thread themselves into oil seal front casing.3-153