TM9-2815-226-34-1 - JATONKAM35s HOME ON THE WEB

TM 9-2815-226-34-1b. Measure ring gap with feeler gage. Gap must fall within following limits:NOTEAdd 0.003 in. (0.076 mm) ring gap to new maximum limit for each 0.001 in. (0.025mm) wear in cylinder liner wall.LocationGAPRing No. New Minimum New Maximum1. (top) 0.023 in. (0.584 mm) 0.033 in. (0.838 mm)2. 0.019 in. (0.482 mm) 0.029 in. (0.736 mm)3. 0.019 in. (0.482 mm) 0.029 in. (0.736 mm)4. 0.010 in. (0.254 mm) 0.025 in. (0.635 mm)c. If gap is not correct, try another ring.d. If ring is not chrome-plated, file end of ring to meet new minimum specification (if required).3-141