TM9-2815-226-34-1 - JATONKAM35s HOME ON THE WEB

TM 9-2815-226-34-1CAUTIONUNDER NO CIRCUMSTANCES SHOULD AN ATTEMPT BE MADE TO SCRAPE, LAP,OR FILE BEARING HALVES TO INCREASE OIL CLEARANCE. RAPID ENGINEFAILURE MAY RESULT.d. Total worn maximum clearance should not vary more than 0.002 in. (0.050 mm) between adjacent mainbearings.e. If crankshaft is reground to accept undersize bearings, new undersize bearings must be used. Bearings areavailable in 0.010, 0.020, 0.030, and 0.040 in. (0.254, 0.508, 0.762, and 1.016 mm) undersizes.3-16. CLEAN CONNECTING RODSection VII. CONNECTING ROD REPAIRWARNINGP-D-680 SOLVENT IS POTENTIALLY DANGEROUS. AVOID PROLONGED ORREPEATED CONTACT WITH SKIN. KEEP AWAY FROM FLAME OR EXCESSIVEHEAT.a. Submerge rods in cleaning solvent for two hours.WARNINGCOMPRESSED AIR USED FOR CLEANING PURPOSES WILL NOT EXCEED 30 PSI(207 KPA). USE ONLY WITH EFFECTIVE CHIP GUARDING AND PERSONALPROTECTIVE EQUIPMENT (GOGGLES, SHIELD, GLOVES, ETC.).b. Remove rods and wipe clean. Dry with compressed air.3-127