TM9-2815-226-34-1 - JATONKAM35s HOME ON THE WEB

TM 9-2815-226-34-1(j)Apply cutting oil to thrust surface and tool bit.CAUTIONROTATE T-HANDLE DRIVE VERY SLOWLY TO AVOID CHATTER AND UNEVENTHRUST SURFACE.NOTEKeep tool bit well oiled while cutting.(k)Turn boring bar clockwise one full revolution to check tool bit cutting depth and pattern.CAUTIONREMOVE ONLY AMOUNT OF MATERIAL NECESSARY TO PROVIDE SMOOTH,EVEN THRUST SURFACE.NOTEEach graduation line on stationary collar is 0.001 in. (0.025 mm).(l)Loosen wingscrew on depth setting collar and turn collar to right until indexing line moves onegraduation. Tighten wingscrew.3-103