TM9-2815-226-34-1 - JATONKAM35s HOME ON THE WEB

TM 9-2815-226-34-1(d)(e)Place salvage tool on cylinder block bore to be cut.Place ST-1168-41 washers, ST-1168-40 spacers, and ST-1168-42 washers on hold-down capscrewsand install capscrews securing salvage tool to cylinder block. Tighten finger tight.(f)(g)(h)Pull up on needle valve knob while pushing down on depth adjustment collar. This will lower cutterplate into cylinder counterbore. Cutter plate lower diameter is used to center salvage tool assemblyin counterbore inside diameter.Tighten hold-down capscrews and torque to 25 35 ft lbs (34 47 N•m).Raise cutter plate out of counterbore by pulling up on needle valve knob.3-78