MSC 85/26/Add.2 ANNEX 3 RESOLUTION MSC.268(85) - US Coast ...

More documents

Recommendations

Info

MSC 85/26/Add.2ANNEX 3Page 325.4.2 For trimming purposes, solid bulk cargoes can be categorized as cohesive ornon-cohesive. The angle of repose is a characteristic of non-cohesive bulk cargoes which isindicative of cargo stability and has been included in the individual schedules for non-cohesivecargoes. The angle of repose of the cargoes shall establish which provisions of this sectionapply. Methods for determining the angle of repose are given in section 6.5.4.3 Non-cohesive bulk cargoes having an angle of repose less than or equal to 30ºThese cargoes, which flow freely like grain, shall be carried according to the provisionsapplicable to the stowage of grain cargoes * . The bulk density of the cargo shall be taken intoaccount when determining:.1 the scantlings and securing arrangements of divisions and bin bulkheads; and.2 the stability effect of free cargo surfaces.5.4.4 Non-cohesive bulk cargoes having an angle of repose greater than 30° to 35° inclusiveThese cargoes shall be trimmed according to the following criteria:.1 the unevenness of the cargo surface measured as the vertical distance (∆h)between the highest and lowest levels of the cargo surface shall not exceed B/10,where B is the beam of the ship in metres, with a maximum allowable ∆h = 1.5 m;or.2 loading is carried out using trimming equipment approved by the competentauthority.5.4.5 Non-cohesive bulk cargoes having an angle of repose greater than 35°These cargoes shall be trimmed according to the following criteria:.1 the unevenness of the cargo surface measured as the vertical distance (∆h)between the highest and lowest levels of the cargo surface shall not exceed B/10,where B is the beam of the ship in metres, with a maximum allowable ∆h = 2 m;or.2 loading is carried out using trimming equipment approved by the competentauthority.*Reference is made to chapter VI of the SOLAS Convention, and the International Code for the Safe Carriage ofGrain in Bulk adopted by the Maritime Safety Committee of the Organization by resolution MSC.23(59).I:\MSC\85\26-Add-2.doc
MSC 85/26/Add.2ANNEX 3Page 33Section 6Methods of determining the angle of repose6.1 GeneralAn angle of repose of a non-cohesive solid bulk material shall be measured by a methodapproved by the appropriate authority as required by section 4.1.4 of this Code.6.2 Recommended test methodsThere are various methods in use to determine the angle of repose for non-cohesive solid bulkmaterials. The recommended test methods are listed below:6.2.1 Tilting box methodThis laboratory test method is suitable for non-cohesive granular materials with a grain size notgreater than 10 mm. A full description of the equipment and procedure is given in subsection 2.1of appendix 2.6.2.2 Shipboard test methodIn the absence of a tilting box apparatus, an alternative procedure for determining theapproximate angle of repose is given in subsection 2.2 of appendix 2.I:\MSC\85\26-Add-2.doc
Page 4: MSC 85/26/Add.2ANNEX 3Page 4on the
Page 8 and 9: MSC 85/26/Add.2ANNEX 3Page 81.5.2 C
Page 10 and 11: MSC 85/26/Add.2ANNEX 3Page 102 The
Page 12 and 13: MSC 85/26/Add.2ANNEX 3Page 12Regula
Page 14 and 15: MSC 85/26/Add.2ANNEX 3Page 14CHAPTE
Page 16 and 17: MSC 85/26/Add.2ANNEX 3Page 161.7.1
Page 20 and 21: MSC 85/26/Add.2ANNEX 3Page 202.2 Lo
Page 22 and 23: MSC 85/26/Add.2ANNEX 3Page 223.3 He
Page 24 and 25: MSC 85/26/Add.2ANNEX 3Page 24Sectio
Page 26 and 27: MSC 85/26/Add.2ANNEX 3Page 26FORM F
Page 28 and 29: MSC 85/26/Add.2ANNEX 3Page 28.3 com
Page 30 and 31: MSC 85/26/Add.2ANNEX 3Page 304.7 Ex
Page 36 and 37: MSC 85/26/Add.2ANNEX 3Page 36the ca
Page 40 and 41: MSC 85/26/Add.2ANNEX 3Page 409.3.1.
Page 48 and 49: MSC 85/26/Add.2ANNEX 3Page 4810.8 S
Page 50 and 51: MSC 85/26/Add.2ANNEX 3Page 50- prep
Page 56 and 57: MSC 85/26/Add.2ANNEX 3Page 56APPEND
Page 58 and 59: MSC 85/26/Add.2ANNEX 3Page 58ALUMIN
Page 66 and 67: MSC 85/26/Add.2ANNEX 3Page 66VENTIL
Page 68 and 69: MSC 85/26/Add.2ANNEX 3Page 68CLEAN-
Page 70 and 71: MSC 85/26/Add.2ANNEX 3Page 70VENTIL
Page 72 and 73: MSC 85/26/Add.2ANNEX 3Page 72PRECAU
Page 74 and 75: MSC 85/26/Add.2ANNEX 3Page 74AMMONI
Page 76 and 77: MSC 85/26/Add.2ANNEX 3Page 76Approp
Page 78 and 79: MSC 85/26/Add.2ANNEX 3Page 78STOWAG
Page 80 and 81: MSC 85/26/Add.2ANNEX 3Page 80EMERGE
Page 82 and 83:
MSC 85/26/Add.2ANNEX 3Page 82HOLD C
Page 84 and 85:
MSC 85/26/Add.2ANNEX 3Page 84AMMONI
Page 86 and 87:
MSC 85/26/Add.2ANNEX 3Page 86Prior
Page 88 and 89:
MSC 85/26/Add.2ANNEX 3Page 88AMMONI
Page 90 and 91:
MSC 85/26/Add.2ANNEX 3Page 90ANTIMO
Page 92 and 93:
MSC 85/26/Add.2ANNEX 3Page 92CLEAN-
Page 94 and 95:
MSC 85/26/Add.2ANNEX 3Page 94CARRIA
Page 96 and 97:
MSC 85/26/Add.2ANNEX 3Page 96BIOSLU
Page 98 and 99:
MSC 85/26/Add.2ANNEX 3Page 98BORAX,
Page 100 and 101:
MSC 85/26/Add.2ANNEX 3Page 100CLEAN
Page 102 and 103:
MSC 85/26/Add.2ANNEX 3Page 1024. Sm
Page 104 and 105:
MSC 85/26/Add.2ANNEX 3Page 104.4 th
Page 106 and 107:
MSC 85/26/Add.2ANNEX 3Page 1062.2.3
Page 108 and 109:
MSC 85/26/Add.2ANNEX 3Page 108DISCH
Page 110 and 111:
MSC 85/26/Add.2ANNEX 3Page 110CARBO
Page 112 and 113:
MSC 85/26/Add.2ANNEX 3Page 112CARRI
Page 114 and 115:
MSC 85/26/Add.2ANNEX 3Page 114VENTI
Page 116 and 117:
Page 118 and 119:
MSC 85/26/Add.2ANNEX 3Page 118CHARC
Page 120 and 121:
MSC 85/26/Add.2ANNEX 3Page 120CHOPP
Page 122 and 123:
MSC 85/26/Add.2ANNEX 3Page 122CHROM
Page 124 and 125:
MSC 85/26/Add.2ANNEX 3Page 124CLAYD
Page 126 and 127:
MSC 85/26/Add.2ANNEX 3Page 126LOADI
Page 128 and 129:
MSC 85/26/Add.2ANNEX 3Page 1282.2 A
Page 130 and 131:
MSC 85/26/Add.2ANNEX 3Page 130.2 Pe
Page 132 and 133:
MSC 85/26/Add.2ANNEX 3Page 1322.2 S
Page 134 and 135:
Page 136 and 137:
MSC 85/26/Add.2ANNEX 3Page 136PRECA
Page 138 and 139:
Page 140 and 141:
MSC 85/26/Add.2ANNEX 3Page 140COKE
Page 142 and 143:
MSC 85/26/Add.2ANNEX 3Page 142COLEM
Page 144 and 145:
MSC 85/26/Add.2ANNEX 3Page 144COPPE
Page 146 and 147:
Page 148 and 149:
MSC 85/26/Add.2ANNEX 3Page 148DIAMM
Page 150 and 151:
MSC 85/26/Add.2ANNEX 3Page 150DIREC
Page 152 and 153:
MSC 85/26/Add.2ANNEX 3Page 152Appro
Page 154 and 155:
MSC 85/26/Add.2ANNEX 3Page 154EMERG
Page 156 and 157:
MSC 85/26/Add.2ANNEX 3Page 156HOLD
Page 158 and 159:
MSC 85/26/Add.2ANNEX 3Page 158The s
Page 160 and 161:
Page 162 and 163:
MSC 85/26/Add.2ANNEX 3Page 162WEATH
Page 164 and 165:
MSC 85/26/Add.2ANNEX 3Page 164Any c
Page 166 and 167:
Page 168 and 169:
MSC 85/26/Add.2ANNEX 3Page 168FELSP
Page 170 and 171:
MSC 85/26/Add.2ANNEX 3Page 170FERRO
Page 172 and 173:
MSC 85/26/Add.2ANNEX 3Page 172FERRO
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
MSC 85/26/Add.2ANNEX 3Page 178(vi)
Page 180 and 181:
MSC 85/26/Add.2ANNEX 3Page 180venti
Page 182 and 183:
MSC 85/26/Add.2ANNEX 3Page 182(v) P
Page 184 and 185:
MSC 85/26/Add.2ANNEX 3Page 184space
Page 186 and 187:
MSC 85/26/Add.2ANNEX 3Page 186FISH
Page 188 and 189:
Page 190 and 191:
MSC 85/26/Add.2ANNEX 3Page 190FLUOR
Page 192 and 193:
MSC 85/26/Add.2ANNEX 3Page 192FLY A
Page 194 and 195:
MSC 85/26/Add.2ANNEX 3Page 194GRANU
Page 196 and 197:
MSC 85/26/Add.2ANNEX 3Page 196GYPSU
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
MSC 85/26/Add.2ANNEX 3Page 204IRON
Page 206 and 207:
MSC 85/26/Add.2ANNEX 3Page 206IRONS
Page 208 and 209:
MSC 85/26/Add.2ANNEX 3Page 208LABRA
Page 210 and 211:
MSC 85/26/Add.2ANNEX 3Page 210CLEAN
Page 212 and 213:
MSC 85/26/Add.2ANNEX 3Page 212LIME
Page 214 and 215:
MSC 85/26/Add.2ANNEX 3Page 214LIMES
Page 216 and 217:
Page 218 and 219:
MSC 85/26/Add.2ANNEX 3Page 218MAGNE
Page 220 and 221:
MSC 85/26/Add.2ANNEX 3Page 220MAGNE
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
MSC 85/26/Add.2ANNEX 3Page 226METAL
Page 228 and 229:
Page 230 and 231:
MSC 85/26/Add.2ANNEX 3Page 230WEATH
Page 232 and 233:
Page 234 and 235:
MSC 85/26/Add.2ANNEX 3Page 234PEAT
Page 236 and 237:
MSC 85/26/Add.2ANNEX 3Page 236PEBBL
Page 238 and 239:
MSC 85/26/Add.2ANNEX 3Page 238PERLI
Page 240 and 241:
Page 242 and 243:
MSC 85/26/Add.2ANNEX 3Page 242PHOSP
Page 244 and 245:
MSC 85/26/Add.2ANNEX 3Page 244PIG I
Page 246 and 247:
MSC 85/26/Add.2ANNEX 3Page 246PITCH
Page 248 and 249:
MSC 85/26/Add.2ANNEX 3Page 248APPEN
Page 250 and 251:
MSC 85/26/Add.2ANNEX 3Page 250POTAS
Page 252 and 253:
Page 254 and 255:
MSC 85/26/Add.2ANNEX 3Page 254PUMIC
Page 256 and 257:
Page 258 and 259:
MSC 85/26/Add.2ANNEX 3Page 258may b
Page 260 and 261:
MSC 85/26/Add.2ANNEX 3Page 260QUART
Page 262 and 263:
MSC 85/26/Add.2ANNEX 3Page 262RADIO
Page 264 and 265:
MSC 85/26/Add.2ANNEX 3Page 264RADIO
Page 266 and 267:
MSC 85/26/Add.2ANNEX 3Page 266RASOR
Page 268 and 269:
Page 270 and 271:
MSC 85/26/Add.2ANNEX 3Page 270SALT
Page 272 and 273:
MSC 85/26/Add.2ANNEX 3Page 272SANDD
Page 274 and 275:
MSC 85/26/Add.2ANNEX 3Page 274SAWDU
Page 276 and 277:
MSC 85/26/Add.2ANNEX 3Page 276SCRAP
Page 278 and 279:
Page 280 and 281:
MSC 85/26/Add.2ANNEX 3Page 280CHARA
Page 282 and 283:
MSC 85/26/Add.2ANNEX 3Page 282SEED
Page 284 and 285:
MSC 85/26/Add.2ANNEX 3Page 284permi
Page 286 and 287:
MSC 85/26/Add.2ANNEX 3Page 286CHARA
Page 288 and 289:
MSC 85/26/Add.2ANNEX 3Page 288SEED
Page 290 and 291:
MSC 85/26/Add.2ANNEX 3Page 290SILIC
Page 292 and 293:
Page 294 and 295:
MSC 85/26/Add.2ANNEX 3Page 294SODIU
Page 296 and 297:
MSC 85/26/Add.2ANNEX 3Page 296SODIU
Page 298 and 299:
MSC 85/26/Add.2ANNEX 3Page 298STAIN
Page 300 and 301:
MSC 85/26/Add.2ANNEX 3Page 300SUGAR
Page 302 and 303:
MSC 85/26/Add.2ANNEX 3Page 302SULPH
Page 304 and 305:
MSC 85/26/Add.2ANNEX 3Page 304SULPH
Page 306 and 307:
MSC 85/26/Add.2ANNEX 3Page 306SUPER
Page 308 and 309:
MSC 85/26/Add.2ANNEX 3Page 308TACON
Page 310 and 311:
MSC 85/26/Add.2ANNEX 3Page 310TANKA
Page 312 and 313:
MSC 85/26/Add.2ANNEX 3Page 312TAPIO
Page 314 and 315:
MSC 85/26/Add.2ANNEX 3Page 314VANAD
Page 316 and 317:
MSC 85/26/Add.2ANNEX 3Page 316VERMI
Page 318 and 319:
MSC 85/26/Add.2ANNEX 3Page 318WOODC
Page 320 and 321:
MSC 85/26/Add.2ANNEX 3Page 320WOOD
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
MSC 85/26/Add.2ANNEX 3Page 332Conse
Page 334 and 335:
MSC 85/26/Add.2ANNEX 3Page 334I:\MS
Page 336 and 337:
MSC 85/26/Add.2ANNEX 3Page 336Figur
Page 338 and 339:
MSC 85/26/Add.2ANNEX 3Page 338Peat
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
MSC 85/26/Add.2ANNEX 3Page 3481.3 P
Page 350 and 351:
MSC 85/26/Add.2ANNEX 3Page 350.2 De
Page 352 and 353:
MSC 85/26/Add.2ANNEX 3Page 3522 Tes
Page 354 and 355:
Page 356 and 357:
MSC 85/26/Add.2ANNEX 3Page 356and a
Page 358 and 359:
Page 360 and 361:
MSC 85/26/Add.2ANNEX 3Page 3604 Tro
Page 362 and 363:
Page 364 and 365:
MSC 85/26/Add.2ANNEX 3Page 364the t
Page 366 and 367:
MSC 85/26/Add.2ANNEX 3Page 36612345
Page 368 and 369:
Page 370 and 371:
MSC 85/26/Add.2ANNEX 3Page 370MATER
Page 372 and 373:
Page 374 and 375:
Page 376:
show all

MSC 85/26/Add.2 ANNEX 3 RESOLUTION MSC.268(85) - US Coast ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?