MSC 85/26/Add.2 ANNEX 3 RESOLUTION MSC.268(85) - US Coast ...
MSC 85/26/Add.2 ANNEX 3 RESOLUTION MSC.268(85) - US Coast ... MSC 85/26/Add.2 ANNEX 3 RESOLUTION MSC.268(85) - US Coast ...
MSC 85/26/Add.2ANNEX 3Page 26FORM FOR CARGO INFORMATIONfor Solid Bulk CargoesBCSNShipperConsigneeName/means of transportPort/place of departurePort/place of destinationGeneral description of the cargo(Type of material/particle size)Transport document numberCarrierInstructions or other mattersGross mass (kg/tonnes)Specifications of bulk cargo, if applicable:Stowage factor:Angle of repose, if applicable:Trimming procedures:Chemical properties if potential hazard * :* e.g., Class & UN No. or “MHB”Group of the cargo*Group A and B *Group A *Group BGroup CFor cargoes which may liquefy (Group Aand Group A and B cargoes)Relevant special properties of the cargo(e.g., highly soluble in water)DECLARATIONI hereby declare that the consignment isfully and accurately described and that thegiven test results and other specifications arecorrect to the best of my knowledge andbelief and can be considered asrepresentative for the cargo to be loaded.Transportable Moisture LimitMoisture content at shipmentAdditional certificate(s) *Certificate of moisture content andtransportable moisture limitWeathering certificateExemption certificateOther (specify)* If requiredName/status, company/organization ofsignatoryPlace and dateSignature on behalf of shipperI:\MSC\85\26-Add-2.doc
MSC 85/26/Add.2ANNEX 3Page 274.3 Certificates of test4.3.1 To obtain the information required in 4.2.1 the shipper shall arrange for the cargo to beproperly sampled and tested. The shipper shall provide the ship’s master or his representativewith the appropriate certificates of test, if required in this Code.4.3.2 When a concentrate or other cargo which may liquefy is carried, the shipper shall providethe ship’s master or his representative with a signed certificate of the TML, and a signedcertificate or declaration of the moisture content. The certificate of TML shall contain, or beaccompanied by the result of the test for determining the TML. The declaration of moisturecontent shall contain, or be accompanied by, a statement by the shipper that the moisture contentis, to the best of his knowledge and belief, the average moisture content of the cargo at the timethe declaration is presented to the master.4.3.3 When a concentrate or other cargo which may liquefy is to be loaded into more than onecargo space of a ship, the certificate or the declaration of moisture content shall certify themoisture content of each type of finely grained material loaded into each cargo space.Notwithstanding this requirement, if sampling according to internationally or nationally acceptedstandard procedures indicates that the moisture content is uniform throughout the consignment,then one certificate or declaration of average moisture content for all cargo spaces is acceptable.4.3.4 Where certification is required by the individual schedules for cargoes possessingchemical hazards, the certificate shall contain, or be accompanied by, a statement from theshipper that the chemical characteristics of the cargo are, to the best of his knowledge, thosepresent at the time of the ship’s loading.4.4 Sampling procedures4.4.1 Physical property tests on the consignment are meaningless unless they are conductedprior to loading on truly representative test samples.4.4.2 Sampling shall be conducted only by persons who have been suitably trained in samplingprocedures and who are under the supervision of someone who is fully aware of the properties ofthe consignment and also the applicable principles and practices of sampling.4.4.3 Prior to taking samples, and within the limits of practicability, a visual inspection of theconsignment which is to form the ship’s cargo shall be carried out. Any substantial portions ofmaterial which appear to be contaminated or significantly different in characteristics or moisturecontent from the bulk of the consignment shall be sampled and analysed separately. Dependingupon the results obtained in these tests, it may be necessary to reject those particular portions asunfit for shipment.4.4.4 Representative samples shall be obtained by employing techniques which take thefollowing factors into account:.1 the type of material;.2 the particle size distribution;I:\MSC\85\26-Add-2.doc
- Page 4: MSC 85/26/Add.2ANNEX 3Page 4on the
- Page 8 and 9: MSC 85/26/Add.2ANNEX 3Page 81.5.2 C
- Page 10 and 11: MSC 85/26/Add.2ANNEX 3Page 102 The
- Page 12 and 13: MSC 85/26/Add.2ANNEX 3Page 12Regula
- Page 14 and 15: MSC 85/26/Add.2ANNEX 3Page 14CHAPTE
- Page 16 and 17: MSC 85/26/Add.2ANNEX 3Page 161.7.1
- Page 18 and 19: MSC 85/26/Add.2ANNEX 3Page 181.7.27
- Page 20 and 21: MSC 85/26/Add.2ANNEX 3Page 202.2 Lo
- Page 22 and 23: MSC 85/26/Add.2ANNEX 3Page 223.3 He
- Page 24 and 25: MSC 85/26/Add.2ANNEX 3Page 24Sectio
- Page 28 and 29: MSC 85/26/Add.2ANNEX 3Page 28.3 com
- Page 30 and 31: MSC 85/26/Add.2ANNEX 3Page 304.7 Ex
- Page 32 and 33: MSC 85/26/Add.2ANNEX 3Page 325.4.2
- Page 34 and 35: MSC 85/26/Add.2ANNEX 3Page 34Sectio
- Page 36 and 37: MSC 85/26/Add.2ANNEX 3Page 36the ca
- Page 38 and 39: MSC 85/26/Add.2ANNEX 3Page 38Sectio
- Page 40 and 41: MSC 85/26/Add.2ANNEX 3Page 409.3.1.
- Page 42 and 43: MSC 85/26/Add.2ANNEX 3Page 429.3.3
- Page 44 and 45: MSC 85/26/Add.2ANNEX 3Page 449.3.4
- Page 46 and 47: MSC 85/26/Add.2ANNEX 3Page 46Sectio
- Page 48 and 49: MSC 85/26/Add.2ANNEX 3Page 4810.8 S
- Page 50 and 51: MSC 85/26/Add.2ANNEX 3Page 50- prep
- Page 52 and 53: MSC 85/26/Add.2ANNEX 3Page 52Sectio
- Page 54 and 55: MSC 85/26/Add.2ANNEX 3Page 5413.2.4
- Page 56 and 57: MSC 85/26/Add.2ANNEX 3Page 56APPEND
- Page 58 and 59: MSC 85/26/Add.2ANNEX 3Page 58ALUMIN
- Page 60 and 61: MSC 85/26/Add.2ANNEX 3Page 60ALUMIN
- Page 62 and 63: MSC 85/26/Add.2ANNEX 3Page 62ALUMIN
- Page 64 and 65: MSC 85/26/Add.2ANNEX 3Page 64ALUMIN
- Page 66 and 67: MSC 85/26/Add.2ANNEX 3Page 66VENTIL
- Page 68 and 69: MSC 85/26/Add.2ANNEX 3Page 68CLEAN-
- Page 70 and 71: MSC 85/26/Add.2ANNEX 3Page 70VENTIL
- Page 72 and 73: MSC 85/26/Add.2ANNEX 3Page 72PRECAU
- Page 74 and 75: MSC 85/26/Add.2ANNEX 3Page 74AMMONI
<strong>MSC</strong> <strong>85</strong>/<strong>26</strong>/<strong>Add.2</strong><strong>ANNEX</strong> 3Page <strong>26</strong>FORM FOR CARGO INFORMATIONfor Solid Bulk CargoesBCSNShipperConsigneeName/means of transportPort/place of departurePort/place of destinationGeneral description of the cargo(Type of material/particle size)Transport document numberCarrierInstructions or other mattersGross mass (kg/tonnes)Specifications of bulk cargo, if applicable:Stowage factor:Angle of repose, if applicable:Trimming procedures:Chemical properties if potential hazard * :* e.g., Class & UN No. or “MHB”Group of the cargo*Group A and B *Group A *Group BGroup CFor cargoes which may liquefy (Group Aand Group A and B cargoes)Relevant special properties of the cargo(e.g., highly soluble in water)DECLARATIONI hereby declare that the consignment isfully and accurately described and that thegiven test results and other specifications arecorrect to the best of my knowledge andbelief and can be considered asrepresentative for the cargo to be loaded.Transportable Moisture LimitMoisture content at shipmentAdditional certificate(s) *Certificate of moisture content andtransportable moisture limitWeathering certificateExemption certificateOther (specify)* If requiredName/status, company/organization ofsignatoryPlace and dateSignature on behalf of shipperI:\<strong>MSC</strong>\<strong>85</strong>\<strong>26</strong>-Add-2.doc