12.07.2015 Views

Introduction PRX-25 card reader is a non-contact high ... - Synel

Introduction PRX-25 card reader is a non-contact high ... - Synel

Introduction PRX-25 card reader is a non-contact high ... - Synel

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Installing the <strong>PRX</strong>-<strong>25</strong> Card ReaderPacking L<strong>is</strong>t of <strong>PRX</strong>-<strong>25</strong>1. Select a location to install the <strong>PRX</strong>-<strong>25</strong> <strong>card</strong> <strong>reader</strong>. The recommendedheight for installation <strong>is</strong> 1.4m.•Color external packing carton with bar code mark, grey/blackThe following items should be found in the <strong>PRX</strong>-<strong>25</strong> package:2. Prepare an outlet hole (of 15mm) in the installation pane.internal packing box3. Drill two 6mm fixing holes to wall and place fixing rubber plugs•<strong>PRX</strong>-<strong>25</strong> : 1 (with model bar code and date of production)into the holes.•Fixing rubber plug and tapping screws: 1 setPicture of <strong>PRX</strong>-20 installation•Instruction Manual: 1•Warranty Card and Quality Certificate: 14. Connect wires between <strong>PRX</strong>-<strong>25</strong> and the controller.5. Turn on the power to test. When the power turns on screw theunit into place.Use a #24 parallel. Do not install in a wire casing withstrong current power cords.Do not expose to direct sunlight, <strong>high</strong> temperatures orstrong electromagnetic interferences.If installed outdoors, a lightning protective device may benecessary.<strong>PRX</strong>-<strong>25</strong>Card ReaderUser ManualCat. no.: 650620Document no. : <strong>PRX</strong><strong>25</strong>-222-01SYNEL Industries LTD.Yokneam Industrial Park, 2 Hamada St.,POB 142, Yokneam 20692, IsraelTel: +972-4-959 6777 Fax: +972-4-959 0729E-mail: info@synel.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!