HGU-55/P - Gentex Corporation

HelmetsVisorsVisionixVisor HousingsHelmet AccessoriesOxygen MasksOxygen ConnectorsOxygen Mask AccessoriesTest SetsEquipment TrainingAIRwww.gentexcorp.com

GENTEX AIR -HELMETSHGU-55/PA world leader in high performance, aircrew helmet protective systems, the GENTEX ® HGU-55/P lightweight helmet provides improved peripheral vision for advanced fighter/attack aircraft aircrewspersonnel, enhanced center of gravity under G-loading and maximum stability.The HGU-55/P features a leather edge roll covering the soft foam core, specially integrated chin/napestrap, visor bump stops atop the helmet, and an innovative matte clear coat with a rigid compositeshell that reduces the helmet weight by approximately 4 ounces from the standard fiberglass HGU-55/P,a tremendous advantage in today’s high-G environment. Approved by the U.S. Air Force, the helmetmeets or exceeds all performance requirements of MIL-H-87174, Helmet Flyers, HGU-55/P.SizeHGU-55/P Helmet(Standard)HGU-55/P Helmet withHigh Speed Visor KitPart NumberHGU-55/P Helmetwith MBU-20/P VisorMedium 81D5530-7 81D5330-13 81D5330-16Large 81D5330-8 81D5330-14 81D5330-17X-Large 81D5330-9 81D5330-15 81D5330-18HGU-84/PDeveloped for the U.S. Navy and U.S. Marine Corps, the GENTEX ® HGU-84/P rotary wing helmet with abungee dual visor helmet assembly integrates the latest advances in technology to provide superiorprotection, stability, retention and comfort in a lightweight, low-profile design.The helmet system integrates with the MBU-12/P Oxygen Mask, MCK-3/P mask, AN/AVS-6 Night VisionGoggles, and EDU-1/P spectacles. The helmet’s frontal opening is cut back in the temple regions toprovide the maximum peripheral vision to the user.SizePart NumberMedium 89D7748-1Large 89D7748-2X-Large 89D7748-3X-Large Wide 89D7748-4HGU-68/PDesigned by GENTEX, the HGU-68/P meets the rigorous requirements of the U.S. Navy and U.S. MarineCorps in today’s high-G environment. The HGU-68/P Tactical Aircrew (TACAIR) helmet incorporatesadvanced technology to provide improved helmet comfort, stability, retention and protection for aircrewpersonnel.The HGU-68/P is equipped with a single visor system that is qualified for 600 KEAS (knots equivalentairspeed) in accordance with MIL-H-85047A and offers a cut back frontal opening at the temple regionto provide maximum peripheral vision.4SizePart NumberMedium 89D7981-1Large 89D7981-2X-Large 89D7981-3

HGU-56/PDesigned to keep pace with innovations in flight technology andemerging mission scenarios, the GENTEX ® HGU-56/P helmetsystem offers modular engineering for cross-platform usewithin multiple Army, Air Force, Coast Guard, Law Enforcementand Civilian rotary aircraft. The unique design of the HGU-56/Pfeatures a multitude of options to improve aircrew personnelfit, functionality, mission adaptability and essential head safetyand protection with superior hearing protection.U.S. ArmyU.S. Coast GuardDescription Part Number NSN Alse Number Part NumberXX-Small 88D7590-1 8415013948032 1680ALSE101-1 01560241X-Small 88D7590-2 8415013948033 1680ALSE101-2 01560242Small 88D7590-3 8415013948036 1680ALSE101-3 01560013Medium 88D7590-4 8415013948034 1680ALSE101-4 01560014Large 88D7590-5 8415013948035 1680ALSE101-5 01560015X-Large 88D7590-6 8415013946474 1680ALSE101-6 01560016XX-Small CEP Installed 88D7590-7 8415015225310 1680ALSE101-7 -X-Small CEP Installed 88D7590-8 8415015225339 1680ALSE101-8 -Small CEP Installed 88D7590-9 8415015225344 1680ALSE101-9 -Medium CEP Installed 88D7590-10 8415015225347 1680ALSE101-10 -Large CEP Installed 88D7590-11 8415015225348 1680ALSE101-11 -X-Large CEP Installed 88D7590-12 8415015225364 1680ALSE101-12 -GENTEX AIR - HELMETSPM HALOSpecifically designed for military and civilian parachutists performing High Altitude - Low Opening (HALO) and HighAltitude - High Opening (HAHO) jumps, the GENTEX ® PM HALO/HAHO Helmet and Oxygen Mask System offers unsurpassedlife support and performance benefits for airborne operations.Unique features of the PM HALO/HAHO include a modular design that allows crew members to select communicationcomponents, oxygen mask receivers, a range of helmet fitting system, visor/goggle components and optional earcupsor earpads depending on noise protection requirements.Mission Sets: Special Operations HALO OperationsFeatures:• Close fitting, snag free design• Available in high or low noise sound attenuation versions• Two sizes that fit the 5 th to 95 th percentileAncillary Equipment: Oxygen Mask, Communication Cables,Microphones, Eyewear, Earphones, Chin and Nape Pads.Part Number Description03D11801-1 Medium/Large High Noise Attenuating03D11801-2 Medium Large Leather Earpads04D11905-1 X-Large High Noise Attenuating04D11905-2 X-Large Leather Earpads5

GENTEX AIR - VISORSVisorsGENTEX ® Visor Assemblies are designed to provide aircrew with facial protection from windblast, high-intensity light, fragments resulting from canopy orscreen failure, ballistic and fragmentation threats, and dust and debris from rotary and jet wash.Each of visor is available for use in single or dual visor configurations and like all GENTEX helmet visors (including clear), provide 99% protection from damagingUVA, UVB and UVC sunlight. Each visor meets the requirements of MIL-V-43511 and provides impact protection equivalent to a 0.22 caliber fragmentation projectileat up to 560 feet per second (fps).Amber - Engineered with its yellow hue, to offer basic contrast to the field of view in hazy or foggy conditions.Amber Visors Helmet Description Part NumberHGU-55/P Lightweight Visor, Amber, Bungee/Elastic, MBU-12/P Mask Trim 85D7139-6HGU-55/P Lightweight Visor, Amber, Bungee/Elastic, MBU-20/P Mask Trim 91A8058-5HGU-68/P Visor, Amber, MBU-12/P Mask Trim, 600 Knot, Track 97A10037-1HGU-68/P Visor, Amber, MBU-20/P Mask Trim, 600 Knot, Track 97A10037-2HGU-84/P Outer Visor, Amber (HGU-84/P) 95A9255-1Laser Visors Helmet Description Part NumberHGU-84/P Outer, Neodymium OD6 93D8482-4HGU-55/P Bungee, MBU-12/P Mask Trim, Neodymium OD6 86B7361-14HGU-55/P Bungee, MBU-20/P Mask Trim, Neodymium OD6 91A8058-10HGU-68/P Track, MBU-12/P Mask Trim, Neodymium OD6 95A9340-4HGU-68/P Track, MBU-20/P Mask Trim, Neodymium OD6 95A9340-5HGU-56/P 2 Notch, Inner 88D7618-2HGU-56/P 3 Notch, Outer 88D7619-2Clear - Designed to provide aircrew with facial protection.Clear Visors Helmet Description Part NumberHGU-55/P Bungee/Elastic, MBU-20/P Mask Trim 91A8058-6HGU-55/P Bungee/Elastic, MBU-12/P Mask Trim 81D5189-3HGU-84/P Inner Clear Visor 90D7914-1HGU-56/P Inner Clear Visor 88D7618-1HGU-68/P Track, MBU-20/P Mask Trim 90D7972-5HGU-68/P Track, MBU-12/P Mask Trim 90D7972-2Neutral Gray - Developed to provide aircrew with facial protection, neutral gray provides sun glare protection.Neutral Gray Visors Helmet Description Part NumberHGU-55/P Bungee/Elastic, MBU-20/P Mask Trim 91A8058-7HGU-55/P Bungee/Elastic, MBU-12/P Mask Trim 81D5189-4HGU-84/P Outer Neutral Visor 90D7915-1HGU-56/P Outer Neutral Visor 88D7619-1HGU-68/P Track, MBU-20/P Mask Trim 90D7972-4HGU-68/P Track, MBU-12/P Mask Trim 90D7972-16

GENTEX AIR - VISIONIXScorpion TM Helmet Mounted Cueing System (HMCS)The GENTEX ® Scorpion is the world’s 1 st full color Helmet Mounted Cueing System (HMCS). Availablein both commercial and application-specific configurations, it can be customized for use in airbornecockpits, simulators, training and system integration applications. In its standard configuration, theScorpion system mounts on a regular aircrew helmet and projects high brightness, field programmable,collimated color symbology and/or video via a commercial standard Ethernet communication link.The display is then projected into the users line of sight, positioned accurately in 3 dimensional freespace. The Scorpion also interfaces with conventional Aviator Night Vision Devices, for low lightconditions.The GENTEX Scorpion is comprised of the following majorelements:• High Brightness Color Display Pod• Magnetic Tracker Assembly• Interface Control Unit• Head/Helmet Banana Bar• Helmet-Vehicle Interface (cable)• Day Visor AssemblyDESCRIPTIONScorpion HMCS Generation IIPART NUMBERA12766*Quantity discount pricing available on request. Customized application pricing available on request. Dual useproduct. Subject to certain export restrictions. Pricing valid through 2009 or until further notice. All pricinginformation is competition sensitive/GENTEX proprietary. All applications will require magnetic characterizationof the application environment before installation (magnetic mapping). Magnetic mapping will be quotedseperatly.8

GENTEX AIR - VISOR HOUSINGS & HELMET ACCESSORIES10X Liner ®The new GENTEX ® X LINER is our most advanced, lightweight, comfort-fitting helmet liner. This revolutionarysystem uses a unique bi-layer, temperature insensitive material that provides an easily adjustable fit. Itoffers maximum comfort even in extreme climates or during prolonged missions and minimizes heat build-upand liner “roll” or “creep.”The helmet liner’s unique design offers nearly 50% greater heat transfer resulting in cooler andgreater comfort to user compared to similar products available today. The X Liner also incorporates ananti-microbial fabric for field hygiene, and the hand-washable material is designed and proven to inhibit odor-causing bacteria while reducing electro-staticdischarge. It’s the only product of its kind fully tested and approved by GENTEX for use in the HGU-55/P, HGU-68/P, and HGU-84/P, and meets all militaryimpact test requirements.Description Part Number Description Part NumberHGU Assembly, Medium, 1/2” Thick 05D11925-1 HGU Assembly, X-Large, 1/2” Thick D11925-5HGU Assembly, Medium, 3/4” Thick 05D11925-2 HGU Assembly, X-Large, 3/4” Thick D11925-6HGU Assembly, Large, 1/2” Thick 05D11925-3 HGU Assembly, X-Large Wide, 1/2” Thick D11925-7HGU Assembly, Large, 3/4” Thick 05D11925-4 HGU Assembly, X-Large Wide, 3/4” Thick D11925-8Super Comfort Liner (SCL)A superior custom fitting helmet product, the Super Comfort Liner (SCL) provides the protectivebenefits of the GENTEX ® Thermo Plastic Liner (TPL ® ), but offers enhanced comfort. The helmet comfortliner provides a more plush cover padding compared to the TPL, but still offers maximum helmetretention during aircraft maneuvering, acceleration and long-duration missions.Description Part Number Description Part NumberHGU-55/P, Medium 02D11531-1 HGU-56/P, XX-Small D11531-8HGU-55/P, Large 02D11531-2 HGU-56/P, X-Small D11531-9HGU-55/P, X-Large 02D11531-3 HGU-56/P, Small D11531-10SPH Series, Small 02D11531-4 HGU-56/P, Medium D11531-11SPH Series, Small-Regular 02D11531-5 HGU-56/P, Large D11531-12SPH Series, Regular 02D11531-6 HGU-56/P, X-Large D11531-13SPH Series, X-Large 02D11531-7Thermo Plastic Liner (TPL ® )A custom-fitting helmet comfort liner, the GENTEX ® Thermo Plastic Liner (TPL) is comprised of multiplelayers of moldable thermo plastic material that can be added to or reduced to create the proper andindividual helmet fit. The TPL offers maximum helmet comfort during aircraft maneuvering, accelerationand long-duration missions.Description Part Number Description Part NumberHGU-55/P, Medium 85D7087-1P HGU-56/P, X-Small D7087-16GHGU-55/P, Large, Preformed 85D7087-2P HGU-56/P, Small D7087-17GHGU-55/P, X-Large, Preformed 85D7087-3P HGU-56/P, Medium D7087-18GHGU-84/P, X-Large Wide, Preformed 85D7087-30P HGU-56/P, Large D7087-19GHGU-56/P, XX-Small 85D7087-15P HGU-56/P, X-Large D7087-20G

Retention AssembliesFlexible and Wire Boom MicrophonesThe HGU-56/P offers two retention system versions; the Double D-Ring and the Snap. Both are designedto reduce aircrews impact injury and are subject to a 400lb chinstrap pull test.The Double D-Ring Retention Assembly (top left) is the original standard retention, with a solid sewnchinstrap that is fastened by interlocking the webbing in two “D” rings.The Snap Retention Assembly version (bottom left) is the latest retention, providing the same level ofprotection as the Double D-Ring version, but offers a fast and easy method of donning and doffing thehelmet. The chinstrap has a D-Ring adjustment point on one end and a snap fastener on the other.Description Part Number NSN ALSE NumberDouble D-Ring Retention 88D7606 8415013948023 1680ALSE150Assembly, HGU-56/P, GreenSnap Retention Assembly,Universal, Green04D11822-2 8415015581082 N/AGENTEX offers a wide variety of Flexible and Wire Boom Microphones for the entire range of flight helmets. Wire Boom Microphones are a low-cost, reliable standardhelmet component, while Flex Boom Microphones offer improved adjustment and mounting features and are available from GENTEX as an upgrade to our helmets.DescriptionWire Microphone-Boom-Cord-SwivelDynamic Microphone, Flex BoomAssemblyPart Number 95B9314-2 03B11804-16B 97C10216-6Intercommunication UnitBoom Microphone Assembly Electret(Sherpa Configured)The Intercommunication Unit allows acoustic or electronic communication in chemically toxic environments. The compactsize of the unit, quickly clips to outside of chemical defense or other protective clothing while providing communicationin hazardous, high-noise environments. A pilot’s speech is broadcast over speaker to crew, the crew’s speech is thenpicked up by a microphone and presented to pilot’s helmet earphones. It plugs into oxygen mask microphones and helmetearphones through a helmet communication cord. A second helmet cord can be connected for two-way hardwire communicationpowered by standard 9-volt battery.The unit has four settings:• Hardwire • Listen Only• Talk/Listen • Off SettingGENTEX AIR - VISOR HOUSINGS & HELMET ACCESSORIESModel Application NSN6015-1 AERPS, AR-5 5965-01-457-84196015-2 AR-5 (V-22 only) TBD11

GENTEX AIR - OXYGEN MASKSMBU-20/P Oxygen MaskThe GENTEX ® MBU-20/P Oxygen Mask is an integral component of the man-worn COMBAT EDGE systemand provides Pressure Breathing for G (PBG) capability to tactical aircrew, while reducing the probabilityof G-induced Loss Of Consciousness (GLOC).Issued to all U.S. Air Force F-15 and F-16 aircrew members, this exceptional unit offers a low-profiledesign and is typically donned with a HGU-55/P helmet. Modified bayonets interface with the receiversand allow the mask to hang on either side of the helmet. Separate inhalation and exhalation valves enablelow-breathing resistance and a special reflective edge provides optimum sealing.Standard M-169A/AIC microphone and communication interfaces are used, and the mask meets allcurrent speech intelligibility requirements. A traditional mask supply hose incorporates the PBG helmetbladder supply hose and a male quick-disconnect connector that interfaces with the female connectorattached to the aircrew helmet.Part Number Size NSNG010-1100-55 Extra Small Narrow 1660-01-479-5621LSG010-1100-51 Small Narrow 1660-01-399-1762LSG010-1100-52 Medium Narrow 1660-01-399-1760LSG010-1100-53 Medium Wide 1660-01-399-1761LSG010-1100-54 Large Wide 1660-01-399-1765LSMBU-20A/P Oxygen MaskGENTEX offers a U.S. Air Force approved and supportable Non-PBG MBU-20/P aircrew oxygen mask fornon-pressure breathing applications. The Non-PBG MBU-20/P is a reduced cost variant of the COMBATEDGE configured MBU-20/P. Reference T.O. 14P3-1-161, Change 29.Significant user and maintainer features that make the Non-PBG MBU-20/P the 21 st century performancemask of choice:• The Non-PBG MBU-20/P has all the benefits of the MBU-20/P in a Non-PBG configuration• Five sizes available that “Plug & Play” and offer direct replacement for MBU-12/P• Increases range of fitting to the 97 th percentile male aircrew member down to the 3 rd percentilefemale aircrew member• Low profile for increased downward field of view• Lower Inhalation and exhalation resistance• Ejection windblast qualified to over 600 knots for superior retention and functionPart Number Size NSNG010-1100-65 Extra Small Narrow 1660-01-538-9925LSG010-1100-61 Small Narrow 1660-01-538-9635LSG010-1100-62 Medium Narrow 1660-01-538-9647LSG010-1100-63 Medium Wide 1660-01-538-9554LSG010-1100-64 Large Wide 1660-01-539-0564LS12

HA/LP Oxygen MaskGENTEX ® High Altitude/Low Profile (HA/LP ® ) Oxygen Masks are designed for use in both PressureBreathing for G (PBG) equipped high performance fighter/attack aircraft and Non-PBG equipped aircraft.HA/LP Oxygen Masks are used by the United States and Foreign Military Services throughout theworld.The HA/LP Oxygen Masks are derivatives of the U.S. Air Force MBU-20/P Oxygen Mask. HA/LP PBGOxygen Masks provide a bladder supply hose that connects the mask assembly to an occipital bladderin the helmet to provide automatic mask tensioning during high G flight. The Non-PBG HA/LP OxygenMasks are direct replacements for both MBU-12/P and MBU-5/P Masks.Similar to the MBU-20/P, the HA/LP Oxygen Masks provide +600 knot windblast protection. The lightweight,low-profile mask design provides optimal positive pressure breathing (PPB) sealing capabilities. Separateinhalation and exhalation valves minimize breathing resistance thus reducing aircrew fatigue.Size Part Number NSNExtra Small Narrow G010-1336-01 N/ASmall Narrow G010-1190-01 1660-01-390-1547Medium Narrow G010-1190-02 1660-01-390-1543Medium Wide G010-1190-03 1660-01-390-1544Large Wide G010-1190-04 1660-01-390-1548GENTEX AIR - OXYGEN MASKSMBU-23/P Oxygen MaskThe choice oxygen mask of the U.S. Navy, the GENTEX ® MBU-23/P is designed for use in tactical aircraftfor both Pressure Breathing for G (PBG) and Non-PBG applications. It offers two configurationswithout communications hardware, and is identified and supported by NAVAIR 13-1-637-3.Light-weight and low-profile, this exceptional unit provides optimal Positive Pressure Breathing (PPB)sealing capabilities and +600-knot windblast protection. A silicone rubber face piece incorporates areflective seal design to optimize sealing capabilities, and the hard shell may be custom-trimmed toallow optimum comfort while maintaining appropriate fit. Separate inhalation and exhalation valvesminimize breathing resistance and reduce aircrew fatigue, while cheek flaps and a chin cup offeradditional injury protection following high-speed or high-altitude ejection.The MBU-23/P is configurable with M-101 Microphone and M-169 Microphone with Amp from GENTEXor other mask mounted amplifiers. The mask comes complete with a U.S. Navy compatiblecommunications cord.MBU-23/P Oxygen Maskwith CommunicationsMBU-23/P Oxygen Maskwithout CommunicationsSizePart NumberExtra Small Narrow G010-1314-65 G010-1314-55Small Narrow G010-1314-61 G010-1314-51Medium Narrow G010-1314-62 G010-1314-52Medium Wide G010-1314-63 G010-1314-53Large Wide G010-1314-64 G010-1314-5413

GENTEX AIR - OXYGEN CONNECTORS14

MiG/Sukhoi HA/LP Oxygen MaskEFA/ACS Oxygen MaskThe MiG and Sukhoi Oxygen Mask is an advanced variation on the High Altitude/Low Profile (HA/LP) OxygenMask, adapted to interface with Russian Aircraft Platforms for MiG 15, 17, 21, 23 and 29 and Sukhoi 17,20, 22, 24, 25 and 27 aircrafts.Designed for use with the Russian KKO-5 Type Oxygen System and KP-52M Type Oxygen Regulator,GENTEX’s specially integrated helmet and mask combination includes the MiG/Sukhoi Variant HA/LPOxygen Mask and a specially configured HGU-55/P with dual visors, and earphone adapter.SizeSmall NarrowMedium NarrowMedium WideLarge WidePart NumberG010-1290-01G010-1290-02G010-1290-03G010-1290-04The EFA/ACS Oxygen Mask is an integral component of the man-worn Air Combat System and providesPressure Breathing for G (PBG) capability to tactical aircrew, while reducing the probability of G-inducedLoss of Consciousness (GLOC).GENTEX AIR - OXYGEN MASKSIssued to Euro-Fighter aircraft pilots, this exceptional unit offers a low-profile design and is typicallydonned with Air Combat System helmet. Bayonets specifically designed to interface with the ACS Helmetreceivers not only secure the mask to the helmet but also supply the helmet bladder with pressurefrom the oxygen breathing hose via the bayonet probe. This allows the helmet bladder to inflate duringhigh G maneuvers adding increased stability to both the helmet and mask during critical stages offlight. Separate inhalation and exhalation valves enable low-breathing resistance and a special reflectiveedge provides optimum sealing.EFA/ACS Oxygen Maskwith Active MicrophoneEFA/ACS Oxygen Maskwith Dynamic MicrophoneSize Part Number Part NumberSmall Narrow G010-1345-01 G010-1345-05Medium Narrow G010-1345-02 G010-1345-06Medium Wide G010-1345-03 G010-1345-07Large Wide G010-1345-04 G010-1345-0815

GENTEX AIR - OXYGEN CONNECTORSCRU-94/P Integrated Terminal BlockCRU-60/P ConnectorThe GENTEX ® CRU-94/P Integrated Terminal Block (ITB) provides Pressure Breathing for G (PBG) capabilityto tactical aircrew reducing the probability of G-induced Loss Of Consciousness (GLOC) during highperformance flight.The ITB is designed to distribute pressurized breathing gas from the aircraft-mounted regulator tothe pilot’s oxygen mask and bladders, located in the vest and COMBAT EDGE HGU-55/P helmet. The unitcoordinates with the MBU-20/P Oxygen Mask and its cast aluminum body interfaces with the standardparachute harness and features two outlet ports to supply breathing gas to the mask and vest bladderduring PBG. It is equipped to relieve pressure within the ITB, and a vest outlet port connects to the vestsupply hose using a 4-pin connector.The ITB features two inlet ports: a breathing gas inlet which incorporates the standard Quick-Disconnectwith restrictor valve and spring loaded relief valve installed, and a standard Emergency Oxygen inletport.Part NumberG002-1150-01NSN1660-01-335-5854LSThe standard for restraint harness connectors, the GENTEX ® CRU-60P connects the aircraft oxygensupply hose from panel mounted oxygen regulators to demand breathing masks.Designed to assure positive locking and prevent flailing during an ejection, this preferred unit is normallysecured to a dovetail mounting plate and attached to an airman’s parachute harness. It connects to astandard three-pin bayonet oxygen mask hose connector, and incorporates an omnidirectional disconnectto assure proper alignment of disconnect forces during an ejection. This advanced fitting also warnsthe pilot when a disconnection has occurred.The CRU-60/P meets the requirements of U.S. Air Force MIL-C-38271B, and features a bail-out oxygenattachment nipple designed to mate with a bail-out bottle supply tube fitting. It can be coordinated withthe HA/LP, MBU-20P, MBU-15/P or MBU-5/P Oxygen Masks.Part NumberNSNG002-3561-01 1660-00-076-9662Modified B1-B ConnectorDesigned for the B1 Bomber aircrew, the Modified B1-B Connector Assembly is essentially a CRU-60/Pwith a reversible dovetail. Engineered with a special yoke that allows the dovetail to be mounted oneither the left or the right side, the pilot has the option of wearing the connector on different sides ofthe torso.Part NumberG002-4240-01NSN4720-01-290-1372BO16

Quick Disconnect Assembly3-Pin Oxygen ConnectorDesigned to meet the requirements of MIL-C-83867, GENTEX offers a choice of two Quick Disconnect Assemblies;the G002-1060-01 Quick Disconnect Assembly and the G002-1060A-01 Quick Disconnect Assembly.The G002-1060-01 Quick Disconnect Assembly features superior over-pressure relief capabilities.Both the G002-1060-01 and G002-1060A-01 Quick Disconnect Assembly feature the ability of the hose barb tomate with oxygen mask assembly hoses, including the MBU-5/P, MBU-12/P, MBU-20/P and HA/LP. Either unitdisconnects from a MS22058 connector between 12 and 20 lbs., and a pin is provided for attachment of a strainrelief cord.Part NumberDesigned to meet the requirements of the MS27796, the 3-Pin Connector mates with mask assembly breathing hosesincluding the MBU-5/P, MBU-12/P, MBU-20/P and HA/LP. A pin is provided for attachment of a strain reliefcord.Part NumberNSNG002-1060-01 1660-00-981-8383G002-1060A-01N/ANSNG002-1001-01 1660-00-730-2247GENTEX AIR - OXYGEN CONNECTORSRotatable Bayonet Receivers (R2)GENTEX ® Rotatable Bayonet Receivers (R2) Capabilities:• Provides 30 degrees of rotation over existing receivers.– Adjustment via top-mounted, common screws.• Provides three hinge settings (left side, right side, or neutral).• Unit can be mounted and hinge on either side of a helmet and can be accessed with either gloved hand.• Provides anti-snag contour feature preventing parachute risers from becoming entangled with either thebayonet or the receiver.• Compatible with MBU-12/P, MBU-20/P, JSAM, and AERP masks.– Surface can be marked to identify various locations.• Compatible with NVGs, High Speed Visors, and Step-In Visors.• Provides a ‘plug-and-play’ replacement for the current GENTEX bayonet receivers without modification to thehelmet shell.• Comes with a mounting template to aid in proper location on helmet shell.• Available in black, white, and gray to match various helmet color schemes.• Made from durable, flame and UV resistant materials.DescriptionR2 Kit, BlackR2 Kit, GrayR2 Kit, WhitePart NumberG013-0003-01G013-0003-02G013-0003-0317

GENTEX AIR - OXYGEN MASK ACCESSORIESOxygen Mask LightThe GENTEX ® Oxygen Mask Light is designed to provide aircrew access to a supplemental light source without sacrificing flight safety. It incorporates theM-169A/AIC microphone which has a lip activated switch mounted to it to provide a hands-free means to turn the light on and off.The Oxygen Mask Light fully integrates with our MBU-20/P, MBU-20A/P, MBU-23/P and HA/LP series of oxygen masks and directly replaces the M-169A/AICmicrophone used for dynamic communication systems.M169-A/AIC MicrophoneThe Oxygen Mask Light is a lightweight, low profile, night vision compatible light source. Its filteredLED is qualified to meet the rigorous standards outlined in MIL-STD-3009, Night Vision Imaging System(NVIS) Compatible Aircraft Lighting making it safe to use in conjunction with sensitive Night VisionGoggles.DescriptionMask Light Assembly (Complete Kit)Internal Assembly, Mask LightExternal Assembly, Mask LightBattery Pack AssemblyBattery Pack Attachment RingCommunication Cord, Mask LightCommunication Cord, Extension, Mask LightBattery, CR-2Adapter, Communication CordPart NumberG030-1500-01G030-1530-01G030-1510-01G030-1540-02G030-1541-02G030-1570-02G030-1575-01GW1260-01G030-1502-01A superior noise-canceling moving coil microphone element, the M-169A/AIC modified microphoneis specially designed for use in an oxygen mask or pressure helmet at altitudes where oxygen isrequired.The unit integrates with the GENTEX ® HA/LP ® and MBU-20P Oxygen Masks, providing more accurateplacement within the masks and substantially better intelligibility and noise rejection over itspredecessor, the M-101/AIC.The M-169A/AIC incorporates state-of-the art adjustment and placement system that providesexceptional stability for the microphone element and is manufactured to rigorous MIL-PRF-26542/12standards.Part NumberNSNG030-1080-02 5965-01-469-977018

Oxygen Mask Tool Kit“Grab-N-Go” Oxygen Mask Tool KitThe GENTEX ® Oxygen Mask Tool Kit provides all of thenecessary tools to support maintenance of the followingmilitary oxygen masks:• MBU-20/P U.S. Air Force COMBAT EDGE Oxygen Mask• MBU-23/P U.S. Navy Oxygen Mask• HA/LP-PPB ® Oxygen Mask• MBU-12/P Oxygen Mask• MBU-5/P Oxygen MaskPart NumberG012-1151-01DescriptionOxygen Mask Tool KitThe portable and convenient GENTEX ® “Grab-N-Go” OxygenMask Tool Kit provides all of the necessary tools to supportmaintenance of the following military oxygen masks:• MBU-20/P Oxygen Mask• Non-PBG MBU-20/P Oxygen Mask (MBU-20A/P)• MBU-23/P Oxygen Mask• HA/LP-PPB ® Oxygen MaskThe MBU-20/P, MBU-20A/P, MBU-23/P, and HA/LP OxygenMasks incorporate an improved Inhalation Valve Assembly(GENTEX P/N: G010-1050-03).Part NumberG010-1267-01Description“Grab-N-Go” Oxygen MaskTool KitGENTEX AIR - OXYGEN MASK ACCESSORIESSmoke GoggleThe GENTEX ® Smoke Goggle Assembly is available for aircrewpersonnel uses on transport U.S. Air Force aircraft,including C-5, C-9, KC-10, C-17, C-27, C-130, KC-135 and C-141.The goggle is designed to protect the wearer’s eyes frompotential smoke in the cockpit or cargo areas.A superior goggle, the unit features a clear plastic lens as wellas a comfortable, lightweight silicone rubber frame and strapthat provides for quick, easy donning and doffing. One size fitsall. Individual replacement components are available.Part NumberNSNG009-1000-01 1660-01-213-087119

GENTEX AIR - OXYGEN MASK ACCESSORIESVest Valve PlugAnti-Suffocation ValveValsalva ValveThe Vest Valve Plug was designed to block the counter pressure vest port on the CRU-94 Integrated Terminal Block(ITB) when a pilot chooses not to wear the CSU-17/P counter pressure vest. This benefits the pilot by permittingincreased COMBAT EDGE pressures to the oxygen mask and flight helmet even though the counter pressure vest is notworn and preventing the CRU-94 ITB from dumping the increased pressure out of the vest valve port.DescriptionVest Valve PlugPart NumberG006-1013-02The Anti-Suffocation Valve (ASV) can be incorporated on the HA/LP Oxygen Masks. The inspiratory activated anti-suffocationvalve allows an unconscious or disabled aircrew member to breathe in the event the mask is not removed from theface.DescriptionAnti-Suffocation ValvePart NumberG012-1155-02The Valsalva Valve can be incorporated on the compensated exhalation valve of the HA/LP oxygen masks to assist theaircrew member in performing Valsalva. This method act as a secondary means to accomplish Valsalva when requiredand is in addition to the standard method of performing Valsalva via pinching of the nose.DescriptionValsalva ValvePart NumberCall for availability20

Life Support Integrated Tester (LSIT)Self Contained Air Source (SCAS)Specially designed to provide functional testing of the COMBAT EDGE Ensemble and derivatives, theGENTEX ® Life Support Integrated Tester (LSIT-1) offers reliable checks for the MBU-20/P and MBU-23/POxygen Masks, CSU-17/P Vest Assembly, HGU-55/P Helmet with occipital bladder, CRU-94/P IntegratedTerminal Block, CRU-60/P Connector, and/or PBG Chest Mounted Regulator, and various lower Anti-Ggarments.The unit provides the operational support capability required to perform equipment tests on PressureBreathing for G (PBG) manside equipment that uses a CRU-94/P Integrated Terminal Block (andaircraft mounted breathing regulator). Among its basic functions are proper positive pressurebreathing schedules and flows and various forms of communication testing.The test set comes standard with battery backup, an LED indication of preprogrammed testparameters and a 9-pin Sub D interface connector for RS-232 data transfer. Optional software is alsoavailable. Training courses may be scheduled for aircrew personnel and maintainers.Part NumberNSNG006-1001-01 6695-01-449-4690GENTEX AIR - TEST SETSBuilt to provide filtered air to perform all Aircrew Life Support Equipment (ALSE) component tests, initialfitting and pre-flight checkout, the GENTEX ® Self-Contained Air Source (SCAS) connects to the standardLSIT-1/A Test Set and replaces the need for compressed air bottles.The unit’s easy to operate design requires very little maintenance and operates at lower pressures for addedsafety. It contains an integral reservoir for a reduced duty cycle and is fully charged in 30 seconds.Easily transported in a convenient, rugged wheeled case, the LSIT SCAS is compatible with 110 V/60 Hz or 220V/50 Hz inlet power and NATO Standard CB Filters.Part NumbersG006-2200-01G006-2200-02PowerDomestic, 110 VoltsInternational, 220 VoltsAircrew Systems Tester (AST)The Aircrew Systems Tester (AST) is a portable test set supporting three basic functions needed to provideaircrews with life support testing such as:• Testing functions of oxygen masks and regulators• Testing functions of oxygen mask/helmet communications• Pre-flight checkout of pilot/aircrew equipmentDesigned to be carried by one person, it is a lightweight, compact and equally useful in the lab, the shop or theflight line. The AST is powered by either the internal rechargeable battery or external 110 VAC Power Cord.The internal battery provides a minimum of 30-minutes operating time. The AST has an internal compressorwhose design leverages the GENTEX ® Self-Contained Air Source (SCAS).The AST will test the MBU-23/P, MBU-20/P, MBU-12/P, MBU-14/P, and HA/LP, and CRU-series regulators,including CRU-82/P, CRU-88/P and CRU-103/P. Testing of ten VDC, twenty-eight VDC, Dynamic and Electretcommunications sets are also a part of the AST.Part NumberNSNG006-2300-01 4920-01-511-008821

GENTEX AIR - TRAININGAviation Life Support Customer Product TrainingCustomers, both operators and maintainers, benefit from training orrefresher courses offered by GENTEX for the proper use, operation andmaintenance of GENTEX oxygen masks, test sets, helmets and otherrelated products.Many training courses, featuring our technical sales and engineeringexperts are held at your site or ours and customized for your specificrequirements. All courses are structured learning environments, andsupported with the appropriate hardware, course outline and applicabletechnical manuals/operation and maintenance manuals. Lengths ofcourses vary depending upon class size and learning components to becovered.Levels of TrainingLevel 1: Specialty Certification (2-4 days)Select 2-4 days of training or refresher training within the specialtyproduct line that suits your specific needs.Level 2: Master Trainer (Additional 1-2 days)Continue adding to your skills as a trainer by completing 1 further day oftraining to become a Certified Master Trainer.22

HelmetsAncillary EquipmentCommunicationsBallistic Upgrade KitsEye ProtectionGROUNDwww.gentexcorp.com

GENTEX GROUND - HELMETSUSMC Lightweight HelmetThis advanced helmet system, designed for the U.S. Marine Corps (USMC), provides improved performancewith reduced weight over the previously issued PASGT helmet. The base material of the helmet is astate-of-the-art ballistic-aramid using a unique construction resulting in increased ballistic protection.Mission Sets: U.S. Marine Corps issued ballistic helmetFeatures:• 5-ounce weight reduction vs. PASGT• Ballistic attachment for retention• Increased ballistic and impact performance• GENTEX ® 4 point X-Harness TM /pad suspensionAncillary Equipment: Ballistic Neck Protection Pad (NPP), Ballistic Optical Shields (BOS), Ballistic MaxillofacialShield (MFS), Goggles, Headsets, Helmet Covers, Adjustable Pad Kit and various Night Visions Goggles(NVG) brackets.Part Number NSN SizeA12769-2 8470-01-560-3267 SmallA12769-3 8470-01-560-3076 MediumA12769-4 8470-01-560-3270 LargeA12769-5 8470-01-560-3271 X-LargeA12769-6 8470-01-560-3272 XX-LargeU.S. Army Advanced Combat Helmet (ACH)The Advanced Combat Helmet (ACH) manufactured by GENTEX is based on the latest configuration requirements of the U.S Army. It provides increased ballisticperformance, impact resistance, stability, comfort and other protective upgrades over the previously issued PASGT helmet. A modified version of the helmet isavailable incorporating an X-Harness TM retention for improved stability.Mission Sets: U.S. Army issued ballistic helmetFeatures:• Weight reduction and increased protection vs. PASGT• Ballistic attachment hardware for retention system• Higher side trimmed shell than LWH/PASGT with “beak” removed for improved situational awareness• Predrilled 1 or 3 holes for NVG bracket attachment• 4 point retention and pad suspension• Available in numerous colors: black, green 383, olive drab, dessert tan, foliage green and coyote brownAncillary Equipment: NPP, MFS, Goggles, Headsets Helmet Covers, X-Harness TM Retention, AdjustablePad KitPart Number NSN SizeA12939-1A1A6 8470-01-529-6302 SmallA12939-2A1A6 8470-01-529-6329 MediumA12939-3A1A6 8470-01-529-6344 LargeA12939-4A1A6 8470-01-529-6365 X-Large*In the chart, left, part numbers are for a foliage green shell and H-Harness Retention System with 3/4 inch pads (6) and predrilledfor 1 NVG hole.24

Tactical Ballistic Helmet (TBH-II TM )-Army(ACH Commercial Version)TBH-II ARMYWITH H-HARNESS RETENTION SYSTEMPart Number NSN SizeD11955-1 8470-01-529-6302 SmallD11955-2 8470-01-529-6329 MediumD11955-3 8470-01-529-6344 LargeD11955-4 8470-01-529-6368 X-LargeMission Sets: Ballistic Infantry Helmet (ACH Shell)Features:• Lighter than the USMC LWH with reduced profile• Ballistic attaching hardware• Uses the ACH shell and pad suspension• GENTEX ® 4 point X-Harness TM or ACH H-Harness• Retention reduces forward rotation/improves stability• Predrilled 1 or 3 holes for NVGs• Available in 4 sizes and optional shell colorsAncillary Equipment: NPP, MFS, Goggles, Headsets, HelmetCovers, Adjustable Pad Kit, Ballistic Neck Protection PadOptional shell colors and predrilling of NVG holes are availableupon request.TBH-II ARMYWITH X-HARNESS RETENTION SYSTEMPart Number NSN SizeC11787-1B2 8470-01-523-0068 SmallC11787-2B2 8470-01-523-0070 MediumC11787-3B2 8470-01-523-0071 LargeC11787-4B2 8470-01-523-0075 X-LargeGENTEX GROUND - HELMETSTBH-II Military Special Operations HelmetThe Tactical Ballistic Helmet-II (TBH-II TM ) for Military Special Operations by GENTEX is designed to offer protectionagainst ballistic level IIIA threats as well as secondary projectiles and other requirements of PS0324.Mission Sets: ACH Shell/Infantry Helmet/SpecialOperations/SWATFeatures:• Lighter than the USMC LWH with reduced profile• ACH helmet shell with GENTEX 4-point X-Harness TM forincreased stability and adjustable thickness pad systemfor uniform compression• Helmet can be predrilled 1 or 3 holes for NVGs• Ballistic attaching hardware• Available in 4 sizes and optional shell colors (black, green383, olive drab, dessert tan, foliage green and coyotebrown)Ancillary Equipment: NPP, MFS, Goggles, Headsets, Helmet Covers.Part NumberNSN1 NVG HoleNSN3 NVG HolesSizeC11812-13x C11812-33 C11812-37 SmallC11812-14x C11812-34 C11812-38 MediumC11812-15x C11812-35 C11812-39 LargeC11812-16x C11812-36 C11812-40 X-Large* “x” - suffix indicated shell color25

GENTEX GROUND - HELMETSTactical Ballistic Helmet High Side Trim (TBH-II TM HST)Part Number(Non NVG Predrilled)Part Number1 HoleThe Tactical Ballistic Helmet High Side Trim (TBH-II TM HST) is designed to meet the rigorouschallenges of Law Enforcement, Assault, and Special Operations Teams. The helmet is lightweightand offers protection against ballistic level IIIA threats as well as secondary projectiles and otherrequirements of Product Specification PS0324.Mission Sets: Special Operations/Recon Forces/Sniper Operations/SWATFeatures:• Completely trimmed sides for interface with headsets and weapon sights• ACH helmet shell with GENTEX ® 4-point X-Harness TM for increased stability and adjustablethickness pad system for uniform compression• Predrilled 1 or 3 holes for NVGs• Available in 4 sizes and numerous colors (black, green 383, olive drab, dessert tan, foliagegreen and coyote brown)Ancillary Equipment: NPP, MFS, Goggles, Headsets, Helmet CoversPart Number3 HolesA13244-2X A13244-6X A13244-10X MediumA13244-3X A13244-7X A13244-11X LargeA13244-4X A13244-8X A13244-12X X-Large* “x” - suffix indicated shell colorSizeTactical Ballistic Helmet Headset Configured (TBH-II TM HC)The Tactical Ballistic Helmet Headset Configured (TBH-II TM HC) is designed to interface with a variety ofcommunication and noise attenuating headsets and meet the rigorous challenges required by Militaryand Law Enforcement personnel. The helmet shell has the same construction as the successfully fielded U.S.Army Advance Combat Helmet (ACH), which offers protection against a variety of ballistic threats aswell as meeting NIJ-level III-A threat and velocity requirements.Mission Sets: Special Operations/Recon ForcesFeatures:• Trimmed higher on sides for improved interface with headsets such as GENTEX ® GenCom III TMand Peltor Comtac that protrude outward at the bottom• ACH helmet shell with GENTEX ® 4-point X-Harness TM , GenCaps for increased stability and adjustablethickness pad system for uniform compression• Can be predrilled 1 or 3 holes for NVGs• Available in 4 sizes and optional shell colors• Conforms to product specification PS0324• Available in 4 sizes and numerous colors (black, green 383, olive drab, dessert tan, foliage greenand coyote brown)Ancillary Equipment: NPP, MFS, Goggles, Headsets, Helmet CoversPart Number(Non NVG Predrilled)Part Number1 HolePart Number3 HolesSizeD12466-1X D12466-5X D12466-9X SmallD12466-2X D12466-6X D12466-10X MediumD12466-3X D12466-7X D12466-11X LargeD12466-4X D12466-8X D12466-12X X-Large* “x” - suffix indicated shell color26

Lightweight IIIA Police PASGTBasic Part NumberC11875-1xC11875-2xC11875-3xC11875-4x* “x” - suffix indicated shell colorThe GENTEX ® Level IIIA Personnel Protective Armor System GroundTroops (PASGT) helmet, also known as the Lightweight LawEnforcement (LE) helmet, is designed to protect law enforcementand other personnel from ballistic threats.Mission Sets: Law EnforcementFeatures:• Uses latest generation U.S. Marine Corps Shell• Shell meets NIJ-level III-A threat and velocity requirements• X-Harness TM and Adjustable Pad kit are standard• Available in 4 sizes and numerous colors (black, olive drab,green 383, CHP blue, UN blue, desert tan, and foliage green)Ancillary Equipment: NPP, MFS, Goggles, Headsets, Riot FaceShield, Ballistic Ocular Shield (BOS), and BallisticNeck Pad.SizeSmallMediumLargeX-LargeGENTEX GROUND - HELMETSSOHAH (Special Operations Headset Adaptable)The Special Operations Headset Adaptable Helmet (SOHAH) by GENTEX ® is designed to be worn over headsets withlarge sound attenuating ear cups that cannot be worn in combination with PASGT and Tactical Ballistic Helmet-II (TBH-II)style helmets or the Advanced Combat Helmet (ACH) helmet.Mission Sets: Special Operations/Coast Guard Maritime/Search and RescueFeatures:• Designed for headsets with large earcups• 3 Levels of Protection:– Non ballistic (bump) Search/Rescue– v 501400 feet per second (fps)– v 502150 fps(Per MIL-STD 662 with a 17-grain fragmentation simulator projectile and 9mm Level IIIA for2150 shell)• X-Harness TM and Adjustable Thickness Pad kit are standard• Novel X-Harness TM design that has fasteners on the bothsides, which could be released to allow the front retentionstrap to be positioned between microphone boom and userscheek.• Available in 2 sizes and various colors and predrilledNVG bracketsAncillary Equipment: NPP, Goggles, Headsets, Helmet CoversShell Colors:A-Black B-Green 383 C-Olive Drab F-Desert TanG-Foliage Green H-Coyote Brown J-USCG BlueK-Search/Rescue Orange L-Gunship GrayNon-Ballistic Ballistic (v 501400) Ballistic (v 502150) SizeD11865-4x D11865-5x D11865-6x SmallD11865-1x D11865-2x D11865-3x Medium/Large* “x” - suffix indicated shell color27

GENTEX GROUND - HELMETSPM HALO/HAHOPart NumberSpecially designed for military and civilian parachutists performing High Altitude - Low Opening (HALO)and High Altitude - High Opening (HAHO) jumps, the PM HALO/HAHO Helmet and Oxygen Mask Systemoffers unsurpassed life support and performance benefits for airborne operations.Unique features include a modular design that allows crew members to select communication components,oxygen mask receivers, helmet fitting system, visor/goggle components and optional earcups or earpadsdepending on noise protection requirements.Mission Sets: Special Operations HALO OperationsFeatures:• Close fitting, snag free design• Available in high or low noise sound attenuation versions• 2 sizes that fit the 5 th to 95 th percentileAncillary Equipment: Oxygen Mask, Communication Cables, Microphones, Eyewear, Earphones, Chin andNape Pads.Description03D11801-1 Medium/Large High Noise Attenuating03D11801-2 Medium Large Leather Earpads04D11905-1 X-Large High Noise Attenuating04D11905-2 X-Large Leather EarpadsDH-132 AS ® - Combat Vehicle Crew (CVC) HelmetDH-132 ® AS helmets are specially designed for use by personnel operating and manning militaryarmored vehicles. The CVC helmets, which are made in accordance with MIL-H-44117, are available inseveral different configurations for specific mission types.Mission Sets: Mounted Operations (Tank, Bradleys, Stryker)Features:• 3 Protection Levels Offered (Bump, 1400 fps, 2150 fps)• Universal size with fire retardant liner• Communications compatible with Vic 1, 2 and 3 intercoms, Active Noise Reduction (ANR) optionalAncillary Equipment: Goggles, Adapters for PRC-148 and other Dismount Radios, Single Visor Kits,NVG BracketsOuter Shell: An outer helmet shell is available in two sizes (Small and Medium/Large) and numerouscolors (black, green, olive drab, desert tan or foliage green). Selection of helmet protection is available-- Fiberglass (bump only), ballistic protection V 501400 fps and ballistic protection V 502150 fps per MILStandard 662, 17 grain fragmentation simulation. An outer shell is optionalInner Liner: An inner helmet liner attaches to both the outer helmet shell and communications system. The inner liner fits 5 th to 95 th percentile, and includeseither an impact foam that is skived for ventilation or a high-moisture/high-humidity resistant ventilated foam pads. The liner is made of fire retardant Nomex ® .Part number are available upon request.28

X-Harness TM Retention SystemThe GENTEX ® X-Harness TM 4-Point Retention System is designed to enhance the stability of the AdvancedCombat Helmet (ACH), prevent premature helmet loss, and minimize helmet rotation, especially whenwearing Night Vision Goggles (NVG). The X-Harness TM is approved by the U.S. Army for ground andairborne operations.Mission Sets: Parachute Operations, Dismounted OperationsFeatures:• Adjustable length chinstrap that attaches with a siderelease buckle• Foam covered leather nape pad that provides enhancedstability when wearing Night Vision Goggles (NVG) orconducting tactical movements• Available in 2 sizes and various colorsAncillary Equipment: Ballistic Neck Protection, Ballistic Attaching HardwareSize/Style Color Part Number NSNSmall/Medium Green 383 B12101-1 -Large/X-Large Green 383 B12101-2 -• Dual chin strap adjustments• Modular design allows for chinstrapreplacementSmall/Medium Foliage Green B12101-3 8470-01-541-9214Large/X-Large Foliage Green B12101-4 8470-01-541-9217Helmet CoversFor military, special operations and law enforcement personnel who deploy for multiple missions,GENTEX offers optional helmet covers for the variety of Tactical Ballistic Helmets-II (TBH-II) --TBH-II/ACH U.S. Army, TBH-II Special Operations, and TBH-II Tactical Law Enforcement.Covers are also available for Combat Vehicle Crew (CVC) and Special Operation Headset AdaptableHelmet (SOHAH) in the same colors as the TBH-II and ACH style helmets.The helmet covers are easily attached to the various helmet shells via the use of elastic edging, or hooktabs. The cover also includes a goggle attachment strap in the center rear of the cover. Night VisionGoggle Brackets or Night Vision Goggle Strap Attachment assemblies can be used in conjunction withthe helmet covers.GENTEX GROUND - ANCILLARY EQUIPMENTFeatures:• NVG brackets or NVG strap attachment assemblies can be attached over covers• Attachment strap to secure a goggle elastic band in place.• Available in Small, Medium, Large and X-LargeColorPart NumbersSmall Medium Large X-LargeWoodland Camo D11513-1 D11513-2 D11513-3 D11513-4Desert Camo D11513-5 D11513-6 D11513-7 D11513-8Black D11513-13 D11513-14 D11513-15 D11513-16Army ACU D11513-17 D11513-18 D11513-19 D11513-20Air Force ABU D11513-21 D11513-22 D11513-23 D11513-2429

GENTEX GROUND - COMMUNICATIONSLVIS digital Crew Communications SystemLVIS ® digital Littoral Vessel Intercom System is a modular, light-weight, marine-grade crew communications system available with the GENTEX ® Portable Transceiver(GPT) for wireless intercommunications. LVIS digital is specially designed for crew communications and radio access in combatant, patrol, and rescue craft.A fully integrated system offers a complete hard-wired and wireless solution that is easily configurable and adaptable to the ever-changing mission profilesencountered in daily operations.LVIS digital - Components(1) Radio interface/intercom control (RIIC)• 2 system bus ports connect up to 12 CCP’s• Can be expanded to accommodate additional radios and crew• Programmable access for each crewmember to each radio system• NMEA 0183 Interface• Ethernet programming port• Factory configurable for 1-8 long range radios• Factory configurable with internal wireless hub to support portable transceivers (uses up to one radio port)• Operates on 9-32 VDC Power(2) Crew Connection Point (CCP)• Provides access for headwear for one crewmember• Wired access and power to support ANR headwear and charge portable transceivers• Provides power to support ANR headwear and charge portable transceiver• Independent selection of interconnected radios (based on programming at intercom control)• Independent listen/level control• Radio Combine/Isolate allows crew to monitor all onboard radios (based on programming at intercom control) orselected radio only• Two color keypad and display- NVG compatible green- Night vision(3) GENTEX ® Portable Transceiver (GPT) - For wireless hands-free communication• PTT or VOX operation for hands-free communication• Independent listen/level control• Submersible to 2 ATM (10m)• Range up to 1500m (line of sight)• 8 hour battery life 5/5/90 duty cycleLVIS digital - HeadwearMedium Duty Headset (MDH-A)• Fits underneath PASGT, MICH and ACH Helmets• Universal size adjustments• Can be worn with or without helmet• Flexible noise-canceling microphone boom for optimal clarity and precise positioning – worn on either side• ANR earcups produce optimum hearing protection for wheeled vehicles• Talk-through microphones pick up ambient noise to maximum level for the wearer to monitor ambient soundGenCom Headset30• Collapsible headband for easy, protected storage in a pocket or case• Fits underneath PASGT, MICH, ACH and SOHAH Helmets• Low two-point fastener and easy height adjustment with no protruding parts• Soft, wide foam and fluid filled sealing rings with built-in pressure reduction channels for ideal comfort• Microphone connection port• Talk-through microphones pick up ambient noise to maximum level for the wearer to monitor ambient sound

LVIS ® v5 Crew Communications SystemThe GENTEX ® Light Vehicle Intercom System (LVIS) is a compact intercom system specially designed for crew intercommunicationsand radio access in tactical vehicles. LVIS is lightweight, rugged and provides the high level of reliability needed.Easily installed and operated, the LVIS System provides crisp, clear, full duplex intercommunications among crewmembers.A single crew volume control knob provides a 28dB range of listening volume adjustment. The system provides DCpower through the crewmember connection ports to enable the use of Active Noise Reduction (ANR) equipped headgear.The system accommodates up to five crewmembers.LVIS v5 - Components(1) Intercom Control Box• Connection ports for commander and 4 crewmembers• Radio port interfaces to radio switchbox for connection to radio system• Commander radio transmit priority interrupts crewmember transmissions ifcommander keys radio• Internal settings establish which users have access to radio TX andRX functions• Power port accepts 11-32 VDC power input• A single crew volume control knob provides a 28dB range of listeningvolume adjustment(2) Crew Connection Point• Used to remote a crew connection and avoid a long cable safety hazard• Volume control provides 28dB volume adjust(3) Radio Switch Box• Connection port for Intercom Control Box• Connection ports for 3 radios• Radio select switch determines which radio is selected for TX• RX from all radios is summedGENTEX GROUND - COMMUNICATIONSDual PTT AdapterGENTEX ® offers the Dual Push-To-Talk (PTT) Adapter, enabling dismounteduse of headwear traditionally used on mounted-only applications. Featuresinclude a Pop-’N-Go operation - allowing users to quickly pop the intercomcable without fumbling to connect portable radios. The dual intercom modeselector is compatible with military intercoms, such as light vehicle intercomsystems LVIS, and VIC-1, VIC-2, VIC-3 and TOCNET. The adapter supportsall U.S. Department of Defense (DoD)-standard portable radios and manycommercial radios and is ideal for first responder and public safetyapplications.The adapter is ergonomically designed, clips to clothing, mounts for leftor right handed operation and features large, easy-to-activate switchesfor use with gloved hands.31

NEXT GENERATION ACHTactical ballistic helmet - iii(TBH-III)Advancements:• 25% weight reduction• Improved suspension liner®• Next generation GENTEX X-Harness TM RetentionSystem offers improved adjustability and fit• Enhanced ballistic hardwarewww.gentexcorp.com

Ballistic Neck Protection Pad (NPP)Ballistic Neck Protection Pad (NPP) protects the back of the neck and occipital region from ballistic projectilethreats. The NPP easily attaches, without the use of tools, to the GENTEX ® 4-point X-Harness TM retention systemsused in both U.S. Marine Corps Lightweight Helmet (LWH) and the Tactical Ballistic Helmet (TBH-II TM ) and theH-Harness Retention used on the U.S. Army ACH and MICH style helmets. The NPP weights less than 4 oz. and theballistic testing is similar to that of the Interceptor vest (see product specification PS 0604).Pattern Color/Style Part Number Pattern Color/Style Part NumberCoyoteBrown USMCMARPATUSMCBallistic Protective Maxillofacial Shield (MFS)A12778-1F ABU Air Force A12778-4A12778-2ACU Army A12778-3The GENTEX ® Ballistic Protective Maxillofacial Shield (MFS) is designed to provide enhanced ballistic protection tothe wearer. It is able to interface with helmet attachment plates and allows for single-handed positioning andis compatible with military goggles.Two protection options are available:• MFS 800 offers no penetration at 800 fps for 17 grain Fragmentation Simulator Projectile• MFS 1800 offers no penetration at 1800 fps for 17 grain Fragmentation Simulator ProjectileMission Sets:• Compatible with the ACH, TBH-II and Lightweight USMC helmets.Features:• Single-handed operations with three position locks• Retrofit to existing helmet for easy don/doffSize MFS 800ACHMFS 800LWH and PASGTMFS 1800ACHLawEnforcementCamoGreenMFS 1800LWH and PASGTSmall C12331-1A1x C12331-2A1x C12331-1A2x C12331-2A2xMedium/Large C12331-1B1x C12331-2B1x C12331-1B2x C12331-2B2xX-Large C12331-1C1x C12331-2C1x C12331-1C2x C12331-2C2x* “x” - suffix indicates protection levelA12778-5FA12778-6FGENTEX GROUND - BALLISTIC UPGRADE KITSBallistic Optical Shield (BOS)The GENTEX ® Ballistic Optical Shield (BOS) attaches to all sizes of the ACH, MICH, TBH-II TM , Lightweight USMCand Police PASGT helmets. It is designed to protect the face and eyes from ballistic penetration of a 9mm, 124grain full metal jacket with a choice of V 01175 or V 01400 fps.Mission Sets:• Breaching, EODFeatures:• One size fits all• Three locking positions• Easy to attach, no tools requiredPart Number Description07C12556-1 V 0140007C12556-2 V 0117533

GENTEX GROUND - COMMUNICATIONSESP-21 TM Combat Goggle SystemThe ESP-21 TM Combat Goggle System is a stackable lens solutiondesigned to meet the challenges of the battlefield. It providesincreased fragmentation protection over most currentlyfielded goggles. The users can attach a 2mm outsert over thepermanent lens for increased protection, sunshade, and laserprotection.Mission Sets: Special Operations, Dismounted/MountedOperations, Police TacticalFeatures:• 4mm anti-fog basic lens (clear)• 2mm additional outset lens• Ski or over-the-head strapAncillary Equipment: Various Lenses (Laser, High Clarity, Amber, Sunshade)Part NumberThe ESP-21 Combat Goggle System is tested and approved by National Tactical Officers Association(NTOA).D10525-1 Universal Strap VersionBallistic Optical Armor (BOA ® )The BOA ® goggle is the latest innovation in military protectiveeyewear. It is designed to readily adjust to the diverse andconstantly changing threats faced in hostile environments.At the heart of the BOA ® goggle, is the ability to easily changelenses allowing the user to reconfigure the goggle to varyingmission need scenarios.NSND10525-6 Ski Strap VersionMission Sets: Special Operations, Dismounted/MountedOperations, Police TacticalFeatures:• 2mm anti-fog coated lens (clear and sunshade)• Quick change lens feature• Ski or over-the-head strapAncillary Equipment: Various Lenses (Laser, High Clarity, Amber,Sunshade), Prescription Lens InsertThe BOA goggle is tested and approvedby National Tactical Officers Association(NTOA).34Part NumberNSNC11870-AFNASNOSki Strap With Anti-Fog Coated LensesC11870-AFNAUNOStandard Strap With Anti-Fog Coated LensesB10141-1 Prescription Lens InsertD11281-10 Clear Anti-Fog LensD11281-11 Sunshade Anti-Fog Coated Lens

HelmetsCommunicationsEye ProtectionMARITIMEwww.gentexcorp.com

GENTEX MARITIME - HELMETSTactical Communications Helmet (TCH)The Tactical Communications Helmet (TCH) is designed for use in the harsh maritime environment providing reliable communications, hearing, impact and ballisticprotection with ease of hygienic maintenance.Mission Sets: U.S. Navy and U.S. Coast Guard Special Operations BoatsFeatures:• Ballistic outer shell with fire retardant liner• Water resistant communications compatible with various intercoms• Easily removed/attach communications for cleaning• Universal sizingAncillary Equipment: Goggles, NVG Brackets, Helmet CoversBasic Part NumberC11595-2 LVISSOHAH (Special Operations Headset Adaptable)DescriptionC11595-4 VIS (VIC-3)C11595-6 Dual RadioC11595-8 VIC-1 and VIC-2C11595-10 GraytronicsC11595-11 LVIS-IVThe Special Operations Headset Adaptable Helmet (SOHAH) by GENTEX is designed to be worn over headsets with large sound attenuating ear cups that cannot beworn in combination with PASGT and Tactical Ballistic Helmet-II (TBH-II) style helmets or the Advanced Combat Helmet (ACH) helmet.Mission Sets: Special Operations/Coast Guard Maritime/Search and RescueFeatures:• Designed for headsets with large earcups• 3 Levels of Protection:– Non ballistic (bump) Search/Rescue– v 501400 feet per second (fps)– v 502150 fps(Per MIL-STD 662 with a 17-grain fragmentation simulator projectile and 9mm Level IIIA for 2150 shell)• X-Harness TM and Adjustable Thickness Pad kit are standard• Novel X-Harness TM design that has fasteners on the bothsides, which could be released to allow the front retentionstrap to be positioned between microphone boom and users cheek.• Available in 2 sizes and various colors and predrilledNVG bracketsAncillary Equipment: NPP, Goggles, Headsets, Helmet CoversShell Colors:A-Black B-Green 383 C-Olive Drab F-Desert Tan G-Foliage Green H-Coyote BrownJ-USCG Blue K-Search/Rescue Orange L-Gunship GraySize Ballistic (v 501400) Ballistic (v 502150) Part Number36Small D11865-5x D11865-6x D11865-4xMedium/Large D11865-2x D11865-3x D11865-1x* “x” - suffix indicated shell color

Phone Talker HelmetThe U.S. Navy Phone talker MK 4 MOD 0 Helmet provides ballistic and impact protection per MIL- H-24616(SH).It is a one size fits all helmet and is compatible to sound powered and other headsets used on Navyships.Mission Sets : U.S. Navy ships and special water craft.Features:• Universal size• Provides ballistic protection• Provides impact protection• Compatible to communication headsets• Fire retardant• Battle ship grey finishAncillary Equipment: GogglesSizeNavy Battle HelmetPart NumberOne Size Fits All 01050021The Naval Battle Helmet, MK-7 provides ballistic and impact protection to U.S. Navy combat personnel. Itis a one size fits all helmet and conforms to the requirements of product specification PS -0170.GENTEX MARITIME - HELMETSMission Sets: U.S. Navy ships and special water craftFeatures:• Universal size• Provides ballistic protection• Provides impact protection• Battle ship grey finishAncillary Equipment:GogglesSize NSN Part NumberOne Size Fits All 8470-01-455-3325 96D9793-137

GENTEX MARITIME - COMMUNICATIONSLVIS digital Crew Communications SystemLVIS ® digital Littoral Vessel Intercom System is a modular, light-weight, marine-grade crew communications system available with the GENTEX ® Portable Transceiver(GPT) for wireless intercommunications. LVIS digital is specially designed for crew communications and radio access in combatant, patrol, and rescue craft.A fully integrated system offers a complete hard-wired and wireless solution that is easily configurable and adaptable to the ever-changing mission profilesencountered in daily operations.LVIS digital - Components(1) Radio interface/intercom control (RIIC)• 2 system bus ports connect up to 12 CCP’s• Can be expanded to accommodate additional radios and crew• Programmable access for each crewmember to each radio system• NMEA 0183 Interface• Ethernet programming port• Factory configurable for 1-8 long range radios• Factory configurable with internal wireless hub to support portable transceivers (uses up to one radio port)• Operates on 9-32 VDC Power(2) Crew Connection Point (CCP)• Provides access for headwear for one crewmember• Wired access and power to support ANR headwear and charge portable transceivers• Provides power to support ANR headwear and charge portable transceiver• Independent selection of interconnected radios (based on programming at intercom control)• Independent listen/level control• Radio Combine/Isolate allows crew to monitor all onboard radios (based on programming at intercom control) orselected radio only• Two color keypad and display- NVG compatible green- Night vision(3) GENTEX ® Portable Transceiver (GPT) - For wireless hands-free communication• PTT or VOX operation for hands-free communication• Independent listen/level control• Submersible to 2 ATM (10m)• Range up to 1500m (line of sight)• 8 hour battery life 5/5/90 duty cycleLVIS digital - HeadwearMedium Duty Headset (MDH-A)• Fits underneath PASGT, MICH and ACH Helmets• Universal size adjustments• Can be worn with or without helmet• Flexible noise-canceling microphone boom for optimal clarity and precise positioning – worn on either side• ANR earcups produce optimum hearing protection for wheeled vehicles• Talk-through microphones pick up ambient noise to maximum level for the wearer to monitor ambient soundGenCom Headset38• Collapsible headband for easy, protected storage in a pocket or case• Fits underneath PASGT, MICH, ACH and SOHAH Helmets• Low two-point fastener and easy height adjustment with no protruding parts• Soft, wide foam and fluid filled sealing rings with built-in pressure reduction channels for ideal comfort• Microphone connection port• Talk-through microphones pick up ambient noise to maximum level for the wearer to monitor ambient sound

LVIS ® v5 Crew Communications SystemThe GENTEX ® Light Vehicle Intercom System (LVIS) is a compact intercom system specially designed for crew intercommunications and radio access in tactical vehicles. LVISis lightweight, rugged and provides the high level of reliability needed.Easily installed and operated, the LVIS System provides crisp, clear, full duplex intercommunications among crewmembers. A single crew volume control knob providesa 28dB range of listening volume adjustment. The system provides DC power through the crewmember connection ports to enable the use of Active Noise Reduction(ANR) equipped headgear. The system accommodates up to five crewmembers.LVIS v5 - Components(1) Intercom Control Box• Connection ports for commander and 4 crewmembers• Radio port interfaces to radio switchbox for connection to radio system• Commander radio transmit priority interrupts crewmember transmissions if commander keys radio• Internal settings establish which users have access to radio TX and RX functions• Power port accepts 11-32 VDC power input• A single crew volume control knob provides a 28dB range of listening volume adjustment(2) Crew Connection Point• Used to remote a crew connection and avoid a long cable safety hazard• Volume control provides 28dB volume adjust(3) Radio Switch Box• Connection port for Intercom Control Box• Connection ports for 3 radios• Radio select switch determines which radio is selected for TX• RX from all radios is summedGENTEX MARITIME - COMMUNICATIONS39

GENTEX MARITIME - EYE PROTECTIONESP-21 TM Combat Goggle SystemThe ESP-21 TM Combat Goggle System is a stackable lens solution designed to meet the challenges of the battlefield.It provides increased fragmentation protection over most currently fielded goggles. The users can attacha 2mm outsert over the permanent lens for increased protection, sunshade, and laser protection.Mission Sets: Special Operations, Dismounted/Mounted Operations, Police TacticalFeatures:• 4mm anti-fog basic lens (clear)• 2mm additional outset lens• Ski or over-the-head strapAncillary Equipment: Various Lenses (Laser, High Clarity, Amber, Sunshade)Part NumberThe ESP-21 Combat Goggle System is tested and approved by National Tactical OfficersAssociation (NTOA).Ballistic Optical Armor (BOA ® )DescriptionD10525-1 Universal Strap VersionD10525-6 Ski Strap VersionThe BOA ® goggle is the latest innovation in military protective eyewear. It is designed to readily adjustto the diverse and constantly changing threats faced in hostile environments. At the heart of the BOA ®goggle, is the ability to easily change lenses allowing the user to reconfigure the goggle to varying missionneed scenarios.Mission Sets: Special Operations, Dismounted/Mounted Operations, Police TacticalFeatures:• 2mm anti-fog coated lens (clear and sunshade)• Quick change lens feature• Ski or over-the-head strapAncillary Equipment: Various Lenses (Laser, High Clarity, Amber, Sunshade), Prescription Lens InsertThe BOA goggle is tested and approved by National Tactical Officers Association(NTOA).Part NumberDescriptionC11870-AFNASNOSki Strap With Anti-Fog Coated LensesC11870-AFNAUNOStandard Strap With Anti-Fog Coated LensesB10141-1 Prescription Lens InsertD11281-10 Clear Anti-Fog LensD11281-11 Sunshade Anti-Fog Coated Lens40

Integrated Helmet/RespiratorIsolation UnitsMasksGarmentsCBRNwww.gentexcorp.com

GENTEX CBRNFAS Helmet/NBC RespiratorThe FAS is an integrated helmet/NBC respirator developed and manufactured by GENTEX which provides Aircrew with Nuclear, Biological, and Chemical (NBC)protection by forming a clean air boundary around the wearer’s face, head, neck, and shoulders.Configurations are tailored per aircraft type (Tactical, Helo, Transport) to ensure the unique missionand crew station requirements of these aircraft are fulfilled. Systems are currently being fielded inthe German Tornado, with future plans to also integrate with Canadian rotary wing aircraft such asthe CH-146.Features:• State-of-the-art, fully integrated helmet/NBC respirator system• Over 8 hours of chemical and biological protection• Flame protection• Incorporates MBU-20/P style oxygen mask• Optimized field-of-view• 600 KEAS windblast protection• PBA protection to 50,000 ft.• Integrated water actuated faceshield release• Available in three sizes• Provides MIL-H-87174 levels of head protection against impact, penetration, and noise• Integrated head ventilation with adjustable flowPart NumberG014-1000-01/12G014-1000-01/14G014-1000-01/02/03SizeComplete FAS EnsembleFaceshield AssemblyHelmet Assembly42

Advanced Biological Isolation TechnologyGENTEX CBRNGENTEX PIUYOUR SOLUTION TO CAREGIVER PROTECTIONDURING PATIENT TREATMENT AND TRANSPORT43

GENTEX CBRNPatient Isolation Unit (PIU)The GENTEX PIU is a government approved, fully DT/OT qualified, andproduction-ready defense item. The PIU is an isolation unit for individualpatient protection, controlled containment, and easy treatment accessfor air/land transport of biologically contaminated personnel.The GENTEX PIU is Food and Drug Administration (FDA) cleared, clearancenumber K080117, with indications for use as follows:The GENTEX Patient Isolation Unit (PIU) is a temporary, single-use, portablestructure that is designed to fully contain and transport a patient andprevent particulate cross-contamination between the patient, the externalenvironment and the caregivers. The PIU is designed to enable medicalcare-giving to the patient via integrated medical bulkheads interfaced withend-user supplied medical products and equipment. The PIU is intendedto be used as a means to temporarily isolate a contaminated patient,outside or within patient care facilities. The PIU can also be used totransport those patients within vehicles, including aircraft, via a NorthAtlantic Treaty Organization (NATO-type) or similar litter/gurney.Features:• Envelope - Water-repellent Nomex ® IIIA produced to MIL-C-83429B specifications, spray rating of 100 (AATCC Test Method 22), and inherent flame resistance properties.• Base - Urethane coated Nylon, 1000 denier yarns used for durability. Treated with a flame resistant coating. Antistatic finish is applied to prevent static buildup and discharge caused by sliding the litter on various materials.• Window Material - Optically clear Surlyn ® Thermoplastic, provides ideal flexibility and rigidity for system• Filtration Fabric - Charged non-woven, composed of proprietary fibers with electrostatic charge. Attracts and retains pathogens (0.3 μ) with an air permeabilityof 26 cfm• Absorbent Pad - Absorbs 15x its weight of normal 0.9% saline and 30x its weight in water• Zipper - Metal tooth with polyurethane compatible backing• Gloves - Butyl rubber (MIL- spec)• Supporting Ribs - Black anodized aluminum per MIL-8625 Type 2 Class IIPart NumberG019-1000 One Size Fits AllSizeChemical Protective GlovesThe GENTEX Chemical Protective Gloves provide a breathable, comfortable alternative to the systemcurrently in use for pilots. This system replaces the cotton inner glove, the butyl glove and the Nomex ®flight glove with a single glove, providing the wearer with a much more comfort and extended wear.To date, both domestic agencies, such as the U.S. Department of Energy, and foreign militaries, includingthe German and Norwegian Air Forces, have purchased gloves for use by their personnel.44Part Number NSN SizeD10434-7 8475-12-330-3629 7D10434-8 8475-12-330-3631 8D10434-9 8475-12-330-3633 9D10434-10 8475-12-330-3635 10D10434-11 8475-12-330-3637 11D10434-12 8475-12-330-3639 12

M52 JSCESM/QuickPro ®The M52 JSCESM/QuickPro ® is a commercial-off-the-shelf, lightweight, low bulk, short duration protectivehood/mask capable of providing warfighters or “civilian users” with above the neck respiratory and ocularprotection against Chemical, Biological, Radiological, and Nuclear (CBRN) attacks.The system protects against non-direct hazards such as chemical vapors, fumes, and airborne biologicaland radiological particulate hazards. The system can be used by military personnel when the standardissued equipment (e.g. M40, MCU-20/P, etc.) is not available or practical, or can be used by any civilianor industrial users that require CBRN protection in either an escape, shelter-in-place, or every day usescenario. A training system is also available, as are training DVDs and a fabric carrying case used toman-mount/man-carry the system.GENTEX CBRNFeatures:• One size fits all• Weight < 1.2 lbs• Disposable, one-time use, with no repair or spare parts• Provides more than 2-hours of continuous above-the-neck protection against low-level CBRN vapor,Aerosol, or particulate threats• Capable of operation from 0 to 49°C, and between 5% to 100% relative humidity• 5-year shelf life• Cartridge Service Life• Live Agent TestingCARTRIDGE SERVICE LIFEChallenge Agent Challenge Concentration Breakthrough Concentration Service Time Until Breakthrough(Minutes)Cyanogen Chloride (CK) 1000 mg/m3 8 mg/m3 ≥65Sarin (GB) 1000 mg/m3 .008 mg/m3 ≥60Mustard (HD) 200 mg/m3 .04 mg/m3 ≥60DMMP 2000 mg/m3 CT=70,000 mg-min/m3 ≥30Sulfur Dioxide (S0 2) 750 ppm 5 ppm ≥30Phosgene 125 ppm 1.25 ppm ≥100Cyanogen Chloride 150 ppm 2 ppm ≥100Cyclohexane 1300 ppm 10 ppm ≥100Chlorine 300 ppm 3 ppm ≥100Hydrogen Cyanide 470 ppm 10 ppm ≥100Nitrogen Dioxide 100 ppm 1 ppm (N02) ≥100Hydrogen Sulfide 500 ppm 30 ppm ≥100Phosphine 150 ppm 0.5 ppm ≥100LIVE AGENT TESTINGChallenge Agent Challenge Concentration Breakthrough Concentration Service Time Until Breakthrough(Minutes)Sarin (GB) CT = 10,000-15,000 mg-min/m3 CT = 3 mg-min/m3 ≥360Mustard (HD) CT = 1500-3000 mg-min/m3 CT = 50 mg-min/m3 ≥360Part NumberG052-1034-01G052-3034-01VersionM52 JSCESMQuickPro45

GENTEX CBRNRampart ® Chemical Biological Defense OvergarmentThe Rampart ® Chemical Biological Defense Overgarment is a two-piece system comprised of a coat andtrousers designed to be worn as a duty uniform by tactical users, including Special Weapons AssaultTeams (SWAT) and First Responders.The overgarment system has been member tested and member approved by tactical users, such asthe National Tactical Officers Organization (NTOA). The system also meets performance requirementssimilar to those required in the JSLIST program. Overall, wearers are offered protection againstchemical and biological agents in a system that is lightweight, launderable and permeable to providethe lowest possible level of heat stress for a system of its type.The coat features a functional hood, which interfaces with several respirators, including the MSA-Millennium,M40, M50, M53 and MCU-2P. The coat is also specially tailored shorter than other tactical garments,preventing interference with the wearer’s utility belt. The waistband and wrists feature Velcro ® tabsfor further fitting adjustments. Zippered pockets on the front chest area offer access and storage ofessential tactical gear and accessories. The coat is first secured closed with a nylon zipper and thena Velcro ® overflap.The trousers feature a high bib-style waist, extra-wide, adjustable suspenders and zipper closures atthe leg bottoms. Flapped pockets are featured at both hips for additional tactical gear and accessories.The coat and trousers both feature additional fabric layers at the greater wear areas - elbows andankles.SizesWoodlandCamouflageJacket/136LDWoodlandCamouflageTrouser/136LDNavy RipstopJacket/136LDPart NumbersNavy RipstopTrousers/136LDNavy RipstopJacket/180LDNavy RipstopTrousers/180LDSmall Short B11185-1 B11186-1 B11206-1 B11207-1 B11629-1 B11630-1Small Regular B11185-2 B11186-2 B11206-2 B11207-2 B11629-2 B11630-2Small Long - - B11206-3 B11207-3 B11629-3 B11630-3Medium Short B11185-4 B11186-4 B11206-4 B11207-4 B11629-4 B11630-4Medium Regular B11185-5 B11186-5 B11206-5 B11207-5 B11629-5 B11630-5Medium Long B11185-6 B11186-6 B11206-6 B11207-6 B11629-6 B11630-6Large Short B11185-7 B11186-7 B11206-7 B11207-7 B11629-7 B11630-7Large Regular B11185-8 B11186-8 B11206-8 B11207-8 B11629-8 B11630-8Large Long B11185-9 B11186-9 B11206-9 B11207-9 B11629-9 B11630-9X-Large Regular B11185-11 B11186-11 B11206-11 B11207-11 B11629-11 B11630-11X-Large Long B11185-12 B11186-12 B11206-13 B11207-12 B11629-12 B11630-12XX-Large Regular B11185-13 B11186-13 B11206-14 B11207-13 B11629-13 B11630-13XXX-Large Long B11185-14 B11186-14 B11206-15 B11207-14 B11629-14 B11630-1446

GENTEX CBRNThe export of any GENTEX products highlighted in this catalog, from the U.S., to a foreign entity or party is subject to the U.S. International in Arms Regulations(22 CFR 120-130) or the U.S. Export Administration Regulations (15 CFR 730-774), as applicable. For further information regarding the export classification ofa specific product, please contact Gentex.47