3820 UG.book - Finn-ID

Code 93< Default All Code 93 Settings >Code 93* OnOffCode 93 Message LengthScan the bar codes below to change the message length. Refer to MessageLength on page 6-2 for additional information. Minimum and Maximumlengths = 0-80. Minimum Default = 0, Maximum Default = 80.Minimum Message LengthCode 93 Code PageMaximum Message LengthCode pages define the mapping of character codes to characters. If the datareceived does not display with the proper characters, it may be because the barcode being scanned was created using a code page that is different from the onethe host program is expecting. If this is the case, scan the bar code below, selectthe code page with which the bar codes were created from the chart, Code PageMapping of Printed Bar Codes on page A-4, and scan the value and the SAVEbar code from the Programming Chart inside the back cover of this manual. Thedata characters should then appear properly.Code 93 Code Page2020/3820 User’s Guide 6 - 11