3820 UG.book - Finn-ID

Code 39 Code PageCode pages define the mapping of character codes to characters. If the datareceived does not display with the proper characters, it may be because the barcode being scanned was created using a code page that is different from the onethe host program is expecting. If this is the case, scan the bar code below, selectthe code page with which the bar codes were created from the chart, Code PageMapping of Printed Bar Codes on page A-4, and scan the value and the SAVEbar code from the Programming Chart inside the back cover of this manual. Thedata characters should then appear properly.Code 39 Code PageInterleaved 2 of 5< Default All Interleaved 2 of 5 Settings >Interleaved 2 of 5* OnOffCheck DigitNo Check Digit indicates that the scanner reads and transmits bar code datawith or without a check digit.2020/3820 User’s Guide 6 - 9